SBOS776D March   2016  – September 2026 INA3221-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Basic ADC Functions
      2. 7.3.2 Alert Monitoring
        1. 7.3.2.1 Critical Alert
          1. 7.3.2.1.1 Summation Control Function
        2. 7.3.2.2 Warning Alert
        3. 7.3.2.3 Power-Valid Alert
        4. 7.3.2.4 Timing-Control Alert
        5. 7.3.2.5 Default Settings
      3. 7.3.3 Software Reset
    4. 7.4 Device Functional Modes
      1. 7.4.1 Averaging Function
      2. 7.4.2 Multiple Channel Monitoring
        1. 7.4.2.1 Channel Configuration
        2. 7.4.2.2 Averaging and Conversion-Time Considerations
      3. 7.4.3 Filtering and Input Considerations
    5. 7.5 Programming
      1. 7.5.1 Bus Overview
        1. 7.5.1.1 Serial Bus Address
        2. 7.5.1.2 Serial Interface
      2. 7.5.2 Writing To and Reading From the INA3221-Q1
        1. 7.5.2.1 High-Speed I2C Mode
      3. 7.5.3 SMBus Alert Response
  9. 8 Register Maps
    1. 8.1 Summary of Register Set
    2. 8.2 Register Descriptions
      1. 8.2.1  Configuration Register (address = 00h) [reset = 7127h]
      2. 8.2.2  Channel-1 Shunt-Voltage Register (address = 01h), [reset = 00h]
      3. 8.2.3  Channel-1 Bus-Voltage Register (address = 02h) [reset = 00h]
      4. 8.2.4  Channel-2 Shunt-Voltage Register (address = 03h) [reset = 00h]
      5. 8.2.5  Channel-2 Bus-Voltage Register (address = 04h) [reset = 00h]
      6. 8.2.6  Channel-3 Shunt-Voltage Register (address = 05h) [reset = 00h]
      7. 8.2.7  Channel-3 Bus-Voltage Register (address = 06h) [reset = 00h]
      8. 8.2.8  Channel-1 Critical-Alert Limit Register (address = 07h) [reset = 7FF8h]
      9. 8.2.9  Warning-Alert Channel-1 Limit Register (address = 08h) [reset = 7FF8h]
      10. 8.2.10 Channel-2 Critical-Alert Limit Register (address = 09h) [reset = 7FF8h]
      11. 8.2.11 Channel-2 Warning-Alert Limit Register (address = 0Ah) [reset = 7FF8h]
      12. 8.2.12 Channel-3 Critical-Alert Limit Register (address = 0Bh) [reset = 7FF8h]
      13. 8.2.13 Channel-3 Warning-Alert Limit Register (address = 0Ch) [reset = 7FF8h]
      14. 8.2.14 Shunt-Voltage Sum Register (address = 0Dh) [reset = 00h]
      15. 8.2.15 Shunt-Voltage Sum-Limit Register (address = 0Eh) [reset = 7FFEh]
      16. 8.2.16 Mask/Enable Register (address = 0Fh) [reset = 0002h]
      17. 8.2.17 Power-valid Upper-limit Register (address = 10h) [reset = 2710h]
      18. 8.2.18 Power-Valid Lower-Limit Register (address = 11h) [reset = 2328h]
      19. 8.2.19 Manufacturer ID Register (address = FEh) [reset = 5449h]
      20. 8.2.20 Die ID Register (address = FFh) [reset = 3220]
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Development Support
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 Receiving Notification of Documentation Updates
    4. 10.4 Support Resources
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MINMAXUNIT
VoltageSupply, VS6V
Analog inputsIN+, IN–Differential (VIN+) – (VIN–)(2)–2626V
Common-mode (VIN+) + (VIN–) / 2–0.326
VPU26
Digital outputsCritical, warning, power valid6V
Timing control26
Serial busData line, SDA(GND – 0.3)6V
Clock line, SCL(GND – 0.3)

6

CurrentInput, into any pin5mA
Open-drain, digital output10
TemperatureOperating, TA–40125°C
Junction, TJ150
Storage, Tstg–65150
(1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.
(2) VIN+ and VIN– can have a differential voltage of –26V to +26V; however, the voltage at these pins must not exceed the range of –0.3V to +26V.