SCEU025 May   2022 CDCBT1001

 

  1.   Trademarks
  2. 1CDCBT1001EVM Evaluation Module
    1. 1.1 Evaluation Module Contents
    2. 1.2 Resources
  3. 2Setup
    1. 2.1 Connection Diagram
    2. 2.2 Power Supplies
    3. 2.3 Input Clock
    4. 2.4 Output Clock
  4. 3Schematic
  5. 4Board Structure
    1. 4.1 PCB Layer Stack-Up
    2. 4.2 PCB Layout
  6. 5Bill of Materials

5 Bill of Materials

Table 5-1 lists the CDCBT1001EVM Bill of Materials (BOM).

Table 5-1 Bill of Materials
DESIGNATORQTYDESCRIPTIONPART NUMBERMANUFACTURER
C1, C22CAP, CERM, 0.1 µF, 16 V, +/- 10%, X7R, 0402885012205037Wurth Elektronik
J1, J22Header, 100mil, 2x1, Gold, THTSW-102-07-G-SSamtec
J3, J42Connector, End launch SMA, 50 ohm, SMT142-0701-851Cinch Connectivity
R1, R22RES, 15.0, 1%, 0.063 W, AEC-Q200 Grade 0, 0402CRCW040215R0FKEDVishay-Dale
U111.2 to 1.8-V Clock Buffer and Level TranslatorCDCBT1001DPWRTexas Instruments