SLAAEG7 April   2024 TAC5111 , TAC5111-Q1 , TAC5112 , TAC5112-Q1 , TAC5211 , TAC5212 , TAC5212-Q1 , TAD5112 , TAD5112-Q1 , TAD5212 , TAD5212-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Headset Plugs and Connection Diagrams
    1. 1.1 Part I: Pseudo-Differential (Capacitor-less) Headset Output Configuration
      1. 1.1.1 Detection Block, Capacitor-less Interface
      2. 1.1.2 How to Determine the Comparator Threshold V1 and V2 (Capacitor-less Interface)
      3. 1.1.3 How Does the Bias Voltage Vary With Detection Mode?
      4. 1.1.4 Detection Sequence – Capacitor-less Interface
    2. 1.2 Part II: AC-Coupled Stereo Headset Output Configuration – Capacitor Interface
      1. 1.2.1 Detection Block – Capacitor Interface
      2. 1.2.2 How to Determine the Comparator Threshold V1 and V2 – Capacitor Interface
      3. 1.2.3 How Does the Bias Voltage Change With Detection Mode?
      4. 1.2.4 Detection Sequence – Capacitor Interface
  5. 2Example for a Pseudo-Differential (Capacitor-less) Output Configuration
  6. 3Example for an AC-Coupled (Capacitor) Output Configuration
  7. 4Flowchart for Pseudo-Differential (Capacitor-less) Output Configuration
  8. 5Flowchart for AC-Coupled (Capacitor) Output Configuration
  9. 6Summary
  10. 7References

1.2.3 How Does the Bias Voltage Change With Detection Mode?

If MICBIAS is turned off or if headset insertion is not detected, then MICBIAS = AVDD

If MICBIAS is turned on and if headset insertion is detected, then MICBIAS = Mic_bias