SLAAEP2 January   2026 ULC1001

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Acronyms
  5. 2Introduction
  6. 3Simulation Environment
  7. 4Simulation of Lens
  8. 5Simulation of Piezo Transducer
  9. 6Simulation of Lens Cover System (LCS)
    1. 6.1 Physics and Boundary Conditions
      1. 6.1.1 Glue
      2. 6.1.2 Thin Film
      3. 6.1.3 Housing
    2. 6.2 Results
  10. 7Resources

6 Simulation of Lens Cover System (LCS)

Figure 6-1 shows the simplified drawing of the LCS geometry. The housing is simplified as a fixed block. The cap is not shown and instead is represented by a damping factor.

LCS: GeometryFigure 6-1 LCS: Geometry