SLAU213B March   2007  – August 2018

 

  1.   MSP430FG4618/F2013 Experimenter Board (MSP‑EXP430FG4618)
    1.     Trademarks
    2. 1 Devices Supported
    3. 2 If You Need Assistance
    4. 3 Required Tools
    5. 4 Functional Overview
    6. 5 Hardware Installation
    7. 6 Hardware Overview
      1. 6.1 Interfaces
        1. 6.1.1 4-Mux LCD Display
        2. 6.1.2 Momentary-On Push Buttons
        3. 6.1.3 Light Emitting Diodes (LEDs)
        4. 6.1.4 Buzzer
        5. 6.1.5 Single-Touch Sensing Interface
      2. 6.2 Communication Peripherals
        1. 6.2.1 Wireless Evaluation Module Interface
        2. 6.2.2 RS-232
        3. 6.2.3 I2C and SPI
      3. 6.3 Analog Signal Chain
        1. 6.3.1 Microphone
        2. 6.3.2 Analog Filters
        3. 6.3.3 Analog Output
      4. 6.4 System Clocks
        1. 6.4.1 MSP430F2013 Clock Sources
        2. 6.4.2 MSP430FG4618 Clock Sources
      5. 6.5 Jumper Configurations
        1. 6.5.1 Jumper Locations and Settings
    8. 7 Frequently Asked Questions
    9. 8 Schematic
    10. 9 References
  2.   Revision History

8 Schematic

msp430fg4618-f2013-schematic.gifFigure 7. MSP-EXP430FG4618 Schematic