SLAU888 may   2023 AFE882H1

 

  1.   AFE882H1 Evaluation Module
  2.   Trademarks
  3. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation From Texas Instruments
  4. 2System Setup
    1. 2.1 Software Setup
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configuration and Jumper Settings
      3. 2.2.3 Connecting the Hardware
        1. 2.2.3.1 Power Configuration
        2. 2.2.3.2 External SPI and UART Controllers
  5. 3Detailed Description
    1. 3.1 Hardware Description
      1. 3.1.1 Theory of Operation
      2. 3.1.2 Signal Definitions
      3. 3.1.3 XTR305 Configuration
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 AFE882H1 Register Page
  6. 4Schematics, PCB Layout, and Bill of Materials
    1. 4.1 Board Schematic
    2. 4.2 PCB Components Layout
    3. 4.3 Bill of Materials

2.2.3 Connecting the Hardware

After the power and jumper configurations are set up per Section 2.2.2, connect the USB cable from the AFE882H1EVM USB port to the local machine. Figure 2-4 displays the system hardware setup.

GUID-20221013-SS0I-HN6H-B00R-W9VTDFZCLNB8-low.svg Figure 2-4 AFE882H1EVM Hardware Setup