SLLU395 March   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Evaluation Setup
  9. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  10. 4Compliance Information
    1. 4.1 Compliance and Certifications
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation
    1. 6.1 Supplemental Content

3.2 PCB Layouts

IO-EXP-ADAPTER-EVM Layer 1 - Top Overlay Figure 3-2 Layer 1 - Top Overlay
IO-EXP-ADAPTER-EVM Layer 2 - Top Solder Mask Figure 3-3 Layer 2 - Top Solder Mask
IO-EXP-ADAPTER-EVM Layer 3 - Top Layer Figure 3-4 Layer 3 - Top Layer
IO-EXP-ADAPTER-EVM Layer 4 - Bottom Layer Figure 3-5 Layer 4 - Bottom Layer
IO-EXP-ADAPTER-EVM Layer 5 - Bottom Solder Mask Figure 3-6 Layer 5 - Bottom Solder Mask
IO-EXP-ADAPTER-EVM Layer 6 - Bottom Overlay Figure 3-7 Layer 6 - Bottom Overlay
IO-EXP-ADAPTER-EVM Layer 7 - Drill Drawing Figure 3-8 Layer 7 - Drill Drawing
IO-EXP-ADAPTER-EVM Layer 8 - Board Dimensions
Note: 3.423 inch × 5.381 inch
Figure 3-9 Layer 8 - Board Dimensions