SLOS053E October   1987  – July 2025 TLC27L4 , TLC27L4A , TLC27L4B , TLC27L9

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  Dissipation Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Electrical Characteristics, VDD = 5V, C Suffix
    5. 5.5  Operating Characteristics, VDD = 5V, C Suffix
    6. 5.6  Electrical Characteristics, VDD = 10V, C Suffix
    7. 5.7  Operating Characteristics, VDD = 10V, C Suffix
    8. 5.8  Electrical Characteristics, VDD = 5V, I Suffix
    9. 5.9  Operating Characteristics, VDD = 5V, I Suffix
    10. 5.10 Electrical Characteristics, VDD = 10V, I Suffix
    11. 5.11 Operating Characteristics, VDD = 10V, I Suffix
    12. 5.12 Typical Characteristics
  7. 6 Parameter Measurement Information
    1. 6.1 Single-Supply Versus Split-Supply Test Circuits
    2. 6.2 Input Bias Current
    3. 6.3 Low-Level Output Voltage
    4. 6.4 Input Offset Voltage Temperature Coefficient
    5. 6.5 Full-Power Response
    6. 6.6 Test Time
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 Single-Supply Operation
      2. 7.1.2 Input Characteristics
      3. 7.1.3 Noise Performance
      4. 7.1.4 Feedback
      5. 7.1.5 Electrostatic Discharge Protection
      6. 7.1.6 Latch-Up
      7. 7.1.7 Output Characteristics
      8. 7.1.8 Typical Applications
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

9 Revision History

Changes from Revision D (March 2001) to Revision E (July 2025)

  • Deleted obsolete TLC27L4M, TLC27L9M, and TLC27L4Y devices and associated content from documentGo
  • Updated the numbering format for tables, figures, and cross-references throughout the documentGo
  • Added Applications, Pin Configuration and Functions, Application and Implementation, Device and Documentation Support, and Mechanical, Packaging, and Orderable Information sectionsGo
  • Deleted Equivalent Schematic sectionGo
  • Added Pin Configuration and Functions section with pin descriptionsGo
  • Changed typical offset voltage from 200µV to 210µV and maximum offset voltage from 900µV to 1000µV for TLC27L9C at TA = 25°CGo
  • Deleted maximum input bias current and input offset of 60pA at TA = 25°C from all Electrical Characteristics Go
  • Added table note that input bias current and input offset current are specified by characterizationGo
  • Changed typical input offset current from 0.1pA to 0.5pAGo
  • Changed typical minimum input common-mode voltage for TA = 25°C from −0.3V to −0.2VGo
  • Changed typical low-level output voltage from 0mV to 1mVGo
  • Changed typical CMRR at TA = 25°C from 94dB to 87dBGo
  • Changed typical CMRR at TA = 0°C and TA = 70°C from 95dB to 85dBGo
  • Added table note that input bias current and input offset current are specified by characterizationGo
  • Changed typical input offset current from 0.1pA to 0.5pAGo
  • Changed typical minimum input common-mode voltage for TA = 25°C from −0.3V to −0.2VGo
  • Changed typical low-level output voltage from 0mV to 5mVGo
  • Changed typical CMRR at TA = 25°C from 97dB to 94dBGo
  • Changed typical CMRR at TA = 0°C and TA = 70°C from 97dB to 93dBGo
  • Changed typical unity-gain bandwidth at TA = 0°C from 125kHz to 110kHzGo
  • Changed typical offset voltage from 200µV to 210µV and maximum offset voltage from 900µV to 1000µV for TLC27L9I at TA = 25°CGo
  • Added table note that input bias current and input offset current are specified by characterizationGo
  • Changed typical input offset current from 0.1pA to 0.5pAGo
  • Changed typical minimum input common-mode voltage for TA = 25°C from −0.3V to −0.2VGo
  • Changed typical low-level output voltage from 0mV to 1mVGo
  • Changed typical CMRR at TA = 25°C from 94dB to 87dBGo
  • Changed typical CMRR at TA = −40°C and TA = 85°C from 95dB to 85dBGo
  • Changed typical unity-gain bandwidth at TA = −40°C from 130kHz to 110kHzGo
  • Added table note that input bias current and input offset current are specified by characterizationGo
  • Changed typical input offset current from 0.1pA to 0.5pAGo
  • Changed typical minimum input common-mode voltage for TA = 25°C from −0.3V to −0.2VGo
  • Changed typical low-level output voltage from 0mV to 5mVGo
  • Changed typical CMRR at TA = 25°C from 97dB to 94dBGo
  • Changed typical CMRR at TA = 85°C from 97dB to 93dBGo
  • Changed typical CMRR at TA = −40°C from 98dB to 93dBGo
  • Changed typical unity-gain bandwidth at TA = −40°C from 155kHz to 110kHzGo
  • Deleted Figures 30 and 31Go
  • Updated Figure 5-30Go
  • Updated description of full-linear and full-peak responses in Full-Power Response Go
  • Added guidance concerning changes to input crossover region to Input Characteristics Go

Changes from Revision C (August 1994) to Revision D (March 2001)

  • Added maximum input bias current and input offset of 60pA at TA = 25°C to all Electrical Characteristics Go