SLUUB60B May   2015  – August 2021 TPS544B25 , TPS544C25

 

  1.   Trademarks
  2. 1 Introduction
  3. 2 Description
    1. 2.1 Typical End-User Applications
    2. 2.2 EVM Features
  4. 3 EVM Electrical Performance Specifications
  5. 4 Schematic
  6. 5 Test Setup
    1. 5.1 Test and Configuration Software
      1. 5.1.1 Description
      2. 5.1.2 Features
    2. 5.2 Test Equipment
    3. 5.3 The PWR-681EVM
    4. 5.4 List of Test Points, Jumpers ans Switch
  7. 6 EVM Configuration Using the Fusion GUI
    1. 6.1 Configuration Procedure
  8. 7 Test Procedure
    1. 7.1 Line/Load Regulation Measurement Procedure
    2. 7.2 Efficiency
    3. 7.3 Bode Plot Measurement Procedure
    4. 7.4 Equipment Shutdown
  9. 8 Performance Data and Typical Characteristic Curves
    1. 8.1  Efficiency
    2. 8.2  Load Regulation
    3. 8.3  Line Regulation
    4. 8.4  Transient Response
    5. 8.5  Output Ripple
    6. 8.6  Control On
    7. 8.7  Control Off
    8. 8.8  Overcurrent Protection
    9. 8.9  Control Loop Bode Plot
    10. 8.10 Thermal Image
  10. 9 Fusion GUI
  11. 10EVM Assembly Drawing and PCB Layout
  12. 11List of Materials
  13. 12Revision History

2.2 EVM Features

  • Regulated 0.95-V output up to 30-ADC, steady-state output current
  • Configuarable features via the PMBus interface include:
    • Programmable Output Voltage via the PMBus Interface
    • Programmable UVLO, Soft Start, and Enable via the PMBus Interface
    • Programmable Overcurrent Warning, Fault Limits and Programmable Response to Faults via the PMBus Interface
    • Programmable Overvoltage, Undervoltage Warning, Fault Limit and Programmable Response to Faults via the PMBus Interface
    • Programmable external Overtemperature Warning, Fault Limit and Programmable Response to Faults via the PMBus Interface
  • Convenient Test Points for Probing Critical Waveforms
  • Optional External Temperature Sensor