SLVUD02A April   2025  – May 2026

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
      1. 1.3.1 Negative Rail Sensing
      2. 1.3.2 Configuration for Push-Pull vs Open-Drain
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Important Usage Notes
    3. 2.3 Connector Descriptions
  7. 3Implementation Results
    1. 3.1 Default Configuration Results
    2. 3.2 Enable and Disable
    3. 3.3 Undervoltage and Overvoltage Monitoring (MODE=0)
    4. 3.4 Window and Overvoltage Monitoring (MODE=1)
    5. 3.5 WDOb
  8. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 Bill of Materials (BOM)
    3. 4.3 PCB Layouts
  9. 5Compliance Information
    1. 5.1 Compliance and Certifications
  10. 6Related Documentation
  11. 7Revision History

4.1 Schematics

Schematics for TPS7H30x4EVM-CVAL and TPS7H31x4EVM-CVAL

TPS7H3xx4EVM-CVAL Default EVM Schematic (TPS7H3024EVM-CVAL and TPS7H3034EVM-CVAL)Figure 4-1 Default EVM Schematic (TPS7H3024EVM-CVAL and TPS7H3034EVM-CVAL)
TPS7H3xx4EVM-CVAL Default EVM Schematic (TPS7H3124EVM-CVAL and TPS7H3134EVM-CVAL) Figure 4-2 Default EVM Schematic (TPS7H3124EVM-CVAL and TPS7H3134EVM-CVAL)