SLVUD93 September   2025

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Connectors and Test Points Information
  7. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  8. 4Additional Information
    1. 4.1 Trademarks

3.2 PCB Layouts

The TPS61388Q1EVM-093 board is a 4-layer PCB. The top and bottom layers copper thickness are 2oz. The two inner layers copper thickness are 1oz. The top view and bottom view are shown in TPS61388Q1EVM-093 and Figure 3-3, respectively. The inner layer 1 and inner layer 2 are shown in Figure 3-4 and Figure 3-5, respectively.

TPS61388Q1EVM-093 TPS61388Q1EVM-042 Top-Side Layout Figure 3-2 TPS61388Q1EVM-042 Top-Side Layout
TPS61388Q1EVM-093 TPS61388Q187EVM-093 Bottom-Side Layout Figure 3-3 TPS61388Q187EVM-093 Bottom-Side Layout
TPS61388Q1EVM-093 TPS61388Q1EVM-093 Inner Layer1 Layout Figure 3-4 TPS61388Q1EVM-093 Inner Layer1 Layout
TPS61388Q1EVM-093 TPS61388Q1EVM-093 Inner Layer2 Layout Figure 3-5 TPS61388Q1EVM-093 Inner Layer2 Layout