SLVUDA9B October   2025  – October 2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specifications
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 I/O Information
    2. 2.2 Jumper Information
    3. 2.3 Equipment
    4. 2.4 Hardware Setup
  9. 3Software
    1. 3.1 Software Setup
    2. 3.2 Test Procedure
      1. 3.2.1 Initial Power Up
      2. 3.2.2 I2C Register Setup
      3. 3.2.3 Forward/Charge/Sink Mode Verification
      4. 3.2.4 Reverse/OTG/Source Mode Verification
      5. 3.2.5 Helpful Tips
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
      1. 4.2.1 PCB Layout Guidelines
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1.     Trademarks
  12. 6Revision History

PCB Layout

Figure 4-3 through Figure 4-6 illustrate the PCB board layers.

BQ25692EVM BQ25692-Q1EVM BMS083B Top Figure 4-3 BMS083B Top
BQ25692EVM BQ25692-Q1EVM BMS083B Inner 1
                        Layer Figure 4-4 BMS083B Inner 1 Layer
BQ25692EVM BQ25692-Q1EVM BMS083B Inner 2
                        Layer Figure 4-5 BMS083B Inner 2 Layer
BQ25692EVM BQ25692-Q1EVM BMS083B Bottom Figure 4-6 BMS083B Bottom