SLVUDB6 August   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Additional Images
    2. 2.2 Power Requirements
    3. 2.3 Setup and Connecting the EVM
    4. 2.4 Header and Jumper Information
    5. 2.5 Push Buttons and Switches
    6. 2.6 Driver Interfaces
    7. 2.7 Test Points
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 Software Installation
      1. 3.2.1 Downloading USB2ANY Firmware (For USB2ANY Explorer or TXE81XXEVM-GUI)
    3. 3.3 GUI Installation
      1. 3.3.1 USB2ANY Explorer GUI
      2. 3.3.2 TXE81XXEVM-GUI
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
    2. 5.2 Terminology

2.3 Setup and Connecting the EVM

The TXE81XXEVM comes with a mini-usb cable. Connect the TXE81XXEVM to a computer or laptop through a USB 3.0 port.

TXE81XXEVM Connect to the TXE81XXEVM via Mini-USB to J17 on the Back of the EVM Figure 2-4 Connect to the TXE81XXEVM via Mini-USB to J17 on the Back of the EVM

Once connected, follow the steps in Section 3.2.1.