SLVUE59 September   2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 General Texas Instruments High Voltage Evaluation (TI HV EVM) Guidelines
  8. 2Hardware
    1. 2.1 Hardware Overview
    2. 2.2 Interfaces
      1. 2.2.1 EVM Power Supply Input
      2. 2.2.2 Voltage Monitor Input
      3. 2.2.3 Current Monitor Input
      4. 2.2.4 Voltage and Current Monitor Outputs
    3. 2.3 Test Points
  9. 3Implementation Results
    1. 3.1 Evaluation Procedure
      1. 3.1.1 Minimum Equipment Required for Full Scale testing
      2. 3.1.2 Voltage Test Procedure
      3. 3.1.3 Current Test Procedure
      4. 3.1.4 Notes on Voltage and Current Measurements
      5. 3.1.5 Calculations
      6. 3.1.6 Voltage and Current Test Results
      7. 3.1.7 Thermal Images
      8. 3.1.8 EMI Test Results
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Compliance Information
    1. 5.1 Compliance and Certifications
  12. 6Additional Information
    1. 6.1 Trademarks

3.1.7 Thermal Images

Figure 3-4 and Figure 3-5 show the thermal performance of the AMC-AMP-VI-EVM.


AMC-AMP-VI-EVM 10Hz Square Wave 50% Duty Cycle

Figure 3-4 10Hz Square Wave 50% Duty Cycle

AMC-AMP-VI-EVM 50A DC for Two Minutes

Figure 3-5 50A DC for Two Minutes