SNAS491C February   2010  – January 2025 LM48580

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics: VDD = 3.6 V #GUID-238D0643-98EF-4676-B2E1-A584A5DF74F7/SNAS491599
    6. 5.6 Typical Performance Characteristics
  7.   Parameter Measurement Information
  8. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Class H Operation
      2. 6.3.2 Properties of Piezoelectric Elements
      3. 6.3.3 Differential Amplifier Explanation
      4. 6.3.4 Thermal Shutdown
      5. 6.3.5 Gain Setting
    4. 6.4 Device Functional Modes
      1. 6.4.1 Shutdown Function
  9. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
        1. 7.2.1.1 Proper Selection of External Components
          1. 7.2.1.1.1 Boost Converter Capacitor Selection
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Boost Converter Output Capacitor Selection
          1. 7.2.2.1.1 Inductor Selection
          2. 7.2.2.1.2 Diode Selection
        2. 7.2.2.2 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  10. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Development Support
    2. 8.2 Receiving Notification of Documentation Updates
    3. 8.3 Community Resources
    4. 8.4 Trademarks
  11. 9 Revision History
  12. 10Mechanical, Packaging, and Orderable Information
7.2.1.1.1 Boost Converter Capacitor Selection

The LM48580 boost converter requires three external capacitors for proper operation: a 1 μF supply bypass capacitor, and 1 μF + 100 pF output reservoir capacitors. Place the supply bypass capacitor as close to VDD as possible. Place the reservoir capacitors as close to VBST and VAMP as possible. Low ESR surface-mount multi-layer ceramic capacitors with X7R or X5R temperature characteristics are recommended. Select output capacitors with voltage rating of 25 V or higher. Tantalum, OS-CON and aluminum electrolytic capacitors are not recommended. See Table 7-1 for suggested capacitor manufacturers.