SNLA498 August   2026 DS90UB948-Q1 , DS90UB954-Q1 , DS90UB960-Q1 , DS90UB984-Q1 , DS90UB988-Q1

 

  1.   1
  2.   Abstract
  3. 1Fundamentals of S-Parameter Theory
    1. 1.1 Characteristic Impedance Explained
    2. 1.2 Reflection Coefficient Explained
    3. 1.3 Insertion Loss Explained
    4. 1.4 Return Loss Explained
    5. 1.5 Two-Port and Four-Port S-Parameters Explained
  4. 2S-Parameter Measurement Methods and Calibration Techniques
    1. 2.1 Introduction to Vector Network Analyzer Principles
    2. 2.2 TDR Measurement Explained
    3. 2.3 VNA Calibration Operating Procedure
    4. 2.4 Test Methods for S11 and S21
  5. 3FPD-Link Channel Specification Analysis
    1. 3.1 Overview of Total Link, PCB, and Cable Channel Specifications
    2. 3.2 Channel Specification Analysis
    3. 3.3 Key Design and Test Considerations for the FPD-Link Channel Specification
  6. 4Conclusion
  7. 5References

Fundamentals of S-Parameter Theory

In Advanced Driver Assistance Systems (ADAS) and In-Vehicle Infotainment (IVI) systems, as the data rates of high-speed serializer/deserializer (SerDes) technologies such as FPD-Link continue to increase, the demand for high-frequency signal simulation, testing, and evaluation has become increasingly prominent. S-parameters (Scattering Parameters), as the core metrics for characterizing high-speed signal channel performance, are a primary consideration for FPD-Link users. This chapter starts with characteristic impedance and progressively analyzes insertion loss, return loss, and multi-port network models.