SPRADA3 july   2023 AM2631 , AM2631-Q1 , AM2632 , AM2632-Q1 , AM2634 , AM2634-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1 Introduction
  5. 2 Device Nomenclature
  6. 3 R5 Cores and TCM in AM263x
    1. 3.1 R5 Core Nomenclature in Am263x
  7. 4 Example Support for AM263x Family
  8. 5 IPC Example Support for Two-Core Devices (AM2632)
    1. 5.1 Option 1 Using MulticoreImageGen.js
    2. 5.2 Option Two (Migration Guide from a Four-Core System Project to a Two-Core System Project)
  9. 6 System Project Example Support for Two-Core Devices (AM2632)
  10. 7 Target Configuration in CCS
    1. 7.1 Prerequisites
    2. 7.2 Creating a Target Configuration
  11. 8 Connecting to the Target Core
  12. 9 Hardware Description for Launch Pad and Control Card
    1. 9.1 Launchpad Pinout for Standard Analog Devices
    2. 9.2 ADC and DAC Mapping in Launchpad for Standard Analog
    3. 9.3 Pinmux Mapping - Standard Analog - Launch Pad
    4. 9.4 ADC and DAC Mapping in Control Card for Standard Analog
  13. 10Summary
  14. 11References

7.2 Creating a Target Configuration

  • Go to View > Target Configuration.
GUID-2D904026-FC2A-4399-8047-B901D261D9C9-low.pngFigure 7-1 Target Configurations in View
  • Create a new target configuration.
GUID-3179A611-D413-4DCD-8AAD-93D02AC3A532-low.pngFigure 7-2 New Target Configuration
  • Give a name to the new target configuration, typically {soc name}_{JTAG type}.
GUID-DA311A65-49FB-4D2A-BB9C-827FAF0B1683-low.pngFigure 7-3 New Target Configuration Window
  • Select connection as XDS110 USB Debug Probe.
GUID-8A31A941-287C-4A90-9E7F-5281EAE0A93A-low.pngFigure 7-4 Debugger Configuration
  • In Board or Device Setting, choose AM2632 or AM2631 depending on the device.
GUID-DF456A25-3E76-4CA5-9CDC-59311FAFCD91-low.pngFigure 7-5 Choosing the Device or Part Number
  • Under Advanced tab, make certain that all the settings are configured.
GUID-9F30FE97-8264-4819-9ED5-62ED95616ACA-low.pngFigure 7-6 JTAG Frequency Configuration
  • Under Advanced tab, select Cortex_R5_0.
  • Make certain that the device csp gel file path is in the Initialization script field.
GUID-A290D41B-35FC-40DD-999D-94FDA5E16FFB-low.pngFigure 7-7 GEL Scripts
  • Click Save to save the newly created target configuration.
  • Now complete the EVM Setup to prepare the EVM for running programs.