SPRADE5 February   2025 TDA4VM , TDA4VM-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Optimization Methology
    1. 2.1 Bootloader Switch to SBL From OSPI Boot Media
    2. 2.2 Linux Device Tree Optimizations
    3. 2.3 File System Switch to Tiny rootfs
    4. 2.4 Vision_apps Framework Optimizations
    5. 2.5 Imaging Framework Optimizations
    6. 2.6 Vision_apps SRV Application Redesign
  6. 3Detailed Design Procedure
    1. 3.1 Linux Integration (PSDKLA)
    2. 3.2 Imaging Integration(PSDKRA)
    3. 3.3 Vision_apps Integration (PSDKRA)
    4. 3.4 PDK Implementation (PSDKRA)
      1. 3.4.1 Build R5 SBL for OSPI Boot Mode
      2. 3.4.2 Build combined_appImage
      3. 3.4.3 Copy TIFS and phy Tuning Parameters
    5. 3.5 Flashing the Binaries to OSPI
    6. 3.6 Steps to Install vision_apps With tiny-rootfs on SD Card
    7. 3.7 Copy Test Data to SD card (one time only)
    8. 3.8 Init Script
    9. 3.9 Moving File System From SD to eMMC
  7. 4Logs
  8. 5Summary
  9. 6References

3.8 Init Script

  1. To avoid losing time on filesystem mounting, bypass using an init script:
    1. Copy the init script file, init.sh, to the SD Card in /media/${USER}/rootfs/home/root directory
    2. After flashing the minimal filesystem to the card, boot up the first time. Login as root.

      Follow the below commands rrom the Linux command prompt on the evm:

      chmod +x init.sh
cd /sbin/
rm init
ln -s /home/root/init.sh init