SPRUJA9A January   2024  – October 2024

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1.     Preface: Read This First
      1. 1.1.1 Sitara MCU+ Academy
      2. 1.1.2 If You Need Assistance
    2. 1.1 Introduction
    3. 1.2 Kit Contents
    4. 1.3 Device Information
  6. 2Hardware
    1. 2.1 Component Identification
    2. 2.2 Power Requirements
      1. 2.2.1 Power Tree
    3. 2.3 Functional Block Diagram
    4. 2.4 Header Information
    5. 2.5 Test Points
    6. 2.6 Interfaces
      1. 2.6.1 Automotive Ethernet PHY
      2. 2.6.2 Automotive Ethernet PHY Strapping Resistors
      3. 2.6.3 Multi-Connector Addressing
    7. 2.7 Integration Guide
      1. 2.7.1 Board Dimensions
      2. 2.7.2 DF40GB Connector
      3. 2.7.3 Mounting Holes
      4. 2.7.4 MATEnet Ethernet Connector
  7. 3Hardware Design Files
  8. 4Additional Information
    1. 4.1 Trademarks
  9. 5References
    1. 5.1 Reference Documents
    2. 5.2 Compatible Sitara™ MCU AM2x EVMs
    3. 5.3 Other TI Components Used in This Design
  10. 6Revision History

2.7.1 Board Dimensions

Figure 2-7 shows the proper PCB dimensions for an Industrial Ethernet PHY add-on board to be compatible with Sitara AM2x EVMs.

DP83TG720-EVM-AM2 Automotive Ethernet PHY Add-on Board Dimensions Figure 2-7 Automotive Ethernet PHY Add-on Board Dimensions

Figure 2-8 shows the side profile of the PCB.

DP83TG720-EVM-AM2 Automotive Ethernet PHY Add-on Board Side Profile Figure 2-8 Automotive Ethernet PHY Add-on Board Side Profile