SSDA008A July   2025  – August 2025 MSPM0C1103 , MSPM0C1104 , MSPM0L1306

 

  1.   1
  2. 1 Description
  3. 2 Required Peripherals
  4. 3 Compatible Devices
  5. 4 Design Steps
  6. 5 Design Considerations
  7. 6 Software Flowchart
  8. 7 Application Code
  9. 8 Results
  10. 9 Additional Resources
  11. 10E2E
  12. 11Trademarks
  13. 12Revision History

Required Peripherals

This application requires two timers, and three device pins.

Table 2-1 Peripherals
Sub-block functionality Peripheral Notes
Capture enable signal (2x) GPIO Detect start signal and watchdog feeding signal
Control reset pin (1x) GPIO Output signal
Watchdog timing (1x) Timer Serve as a watchdog internal timer