SWRS350B December 2025 – September 2026 IWRL6432WMOD
PRODUCTION DATA
In Secondary Device mode, the IWRL6432WMOD is interfaced with an external Host MCU . SPI is the primary host communication interface to configure the module. The host is required to integrate the "mmWaveuLink/uLINK" library to control the module in its system software. The host sends the configuration ( SPI Messages) to the module through the SPI interface. The module provides presence detection through a dedicated GPIO (Presence Indication Output) . In this mode the module can also send out point cloud information to the host via the same SPI interface. The host can interpret the point cloud data to perform higher order processing like tracking.
Figure 8-2 Secondary Device Mode