Product details

Architecture FET / CMOS Input, Voltage FB Number of channels (#) 2 Total supply voltage (Min) (+5V=5, +/-5V=10) 2.5 Total supply voltage (Max) (+5V=5, +/-5V=10) 5.5 GBW (Typ) (MHz) 50 BW @ Acl (MHz) 50 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 300 Vn at flatband (Typ) (nV/rtHz) 5.8 Vn at 1 kHz (Typ) (nV/rtHz) 5.8 Iq per channel (Typ) (mA) 11 Vos (offset voltage @ 25 C) (Max) (mV) 5.8 Rail-to-rail In, Out Rating HiRel Enhanced Product Operating temperature range (C) -55 to 125 CMRR (Typ) (dB) 66 Input bias current (Max) (pA) 7000000 Offset drift (Typ) (uV/C) 3.13 Output current (Typ) (mA) 275 2nd harmonic (dBc) 81 3rd harmonic (dBc) 93 @ MHz 1
Architecture FET / CMOS Input, Voltage FB Number of channels (#) 2 Total supply voltage (Min) (+5V=5, +/-5V=10) 2.5 Total supply voltage (Max) (+5V=5, +/-5V=10) 5.5 GBW (Typ) (MHz) 50 BW @ Acl (MHz) 50 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 300 Vn at flatband (Typ) (nV/rtHz) 5.8 Vn at 1 kHz (Typ) (nV/rtHz) 5.8 Iq per channel (Typ) (mA) 11 Vos (offset voltage @ 25 C) (Max) (mV) 5.8 Rail-to-rail In, Out Rating HiRel Enhanced Product Operating temperature range (C) -55 to 125 CMRR (Typ) (dB) 66 Input bias current (Max) (pA) 7000000 Offset drift (Typ) (uV/C) 3.13 Output current (Typ) (mA) 275 2nd harmonic (dBc) 81 3rd harmonic (dBc) 93 @ MHz 1
VSSOP (DGK) 8 15 mm² 3 x 4.9
  • Unity-gain bandwidth: 450 MHz
  • Wide bandwidth: 200-MHz GBW
  • High slew rate: 360 V/µs
  • Low noise: 5.8 nV/√Hz
  • Excellent video performance:
    • Differential gain: 0.02%
    • Differential phase: 0.05°
    • 0.1-dB gain flatness: 75 MHz
  • Input range includes ground
  • Rail-to-rail output (within 100 mV)
  • Low input bias current: 3 pA
  • Thermal shutdown
  • Single-supply operating range: 2.5 V to 5.5 V
  • Microsize packages
  • Supports defense, aerospace, and medical applications:
    • Controlled baseline
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
  • Unity-gain bandwidth: 450 MHz
  • Wide bandwidth: 200-MHz GBW
  • High slew rate: 360 V/µs
  • Low noise: 5.8 nV/√Hz
  • Excellent video performance:
    • Differential gain: 0.02%
    • Differential phase: 0.05°
    • 0.1-dB gain flatness: 75 MHz
  • Input range includes ground
  • Rail-to-rail output (within 100 mV)
  • Low input bias current: 3 pA
  • Thermal shutdown
  • Single-supply operating range: 2.5 V to 5.5 V
  • Microsize packages
  • Supports defense, aerospace, and medical applications:
    • Controlled baseline
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

The OPA2356-EP high-speed, voltage-feedback CMOS operational amplifier is designed for video and other applications requiring wide bandwidth. The OPA2356-EP is unity-gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescent current is only 8.3 mA per channel.

The OPA2356-EP is optimized for operation on single or dual supplies as low as 2.5 V (±1.25 V) and up to 5.5 V (±2.75 V). The common-mode input range for the OPA2356-EP extends 100 mV below ground and up to 1.5 V from V+. The output swing is within 100 mV of the rails, supporting wide dynamic range.

The OPA2356-EP is available in dual (VSSOP-8) versions. These versions feature completely independent circuitry for lowest crosstalk and freedom from interaction. The OPA2356-EP are specified over the extended –55°C to 125°C range.

The OPA2356-EP high-speed, voltage-feedback CMOS operational amplifier is designed for video and other applications requiring wide bandwidth. The OPA2356-EP is unity-gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescent current is only 8.3 mA per channel.

The OPA2356-EP is optimized for operation on single or dual supplies as low as 2.5 V (±1.25 V) and up to 5.5 V (±2.75 V). The common-mode input range for the OPA2356-EP extends 100 mV below ground and up to 1.5 V from V+. The output swing is within 100 mV of the rails, supporting wide dynamic range.

The OPA2356-EP is available in dual (VSSOP-8) versions. These versions feature completely independent circuitry for lowest crosstalk and freedom from interaction. The OPA2356-EP are specified over the extended –55°C to 125°C range.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet OPA2356-EP 200-MHz, CMOS operational amplifier datasheet 07 Feb 2019
* Radiation & reliability report OPA2356-EP reliability report 28 Feb 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

OPAMPEVM-MSOPTSSOP — Universal EVM for Single/Dual/Quad OpAmps with/without Shutdown in MSOP/TSSOP Packages

The OPAMPEVM-MSOPTSSOP is a general purpose blank circuit board that simplifies evaluation of surface-mount op amps. The evaluation module board design allows many different circuits to be constructed easily and quickly. The board has three separate circuit development areas that can be snapped (...)

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
lock = Requires export approval (1 minute)
Calculation tool

VOLT-DIVIDER-CALC — Voltage Divider Determines A Set of Resistors for a Voltage Divider

VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)

Package Pins Download
VSSOP (DGK) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos