Home Amplifiers Operational amplifiers (op amps) Precision op amps (Vos<1mV)
Home
Amplifiers
Operational amplifiers (op amps)
Precision op amps (Vos<1mV)

OPA4H014-SEP

ACTIVE

Radiation-tolerant, 11MHz, low-noise, precision rail-to-rail output JFET amplifier

Order now
Data sheet

OPA4H014-SEP

ACTIVE
Data sheet Order now

Product details

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 18 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Vos (offset voltage at 25°C) (max) (mV) 0.12 Offset drift (typ) (µV/°C) 0.35 Input bias current (max) (pA) 10 GBW (typ) (MHz) 11 Slew rate (typ) (V/µs) 20 Rail-to-rail Out Iq per channel (typ) (mA) 1.8 Vn at 1 kHz (typ) (nV√Hz) 5.8 CMRR (typ) (dB) 140 Rating Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.03 Architecture FET Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) -3.5 Output swing headroom (to negative supply) (typ) (V) 0.2 Output swing headroom (to positive supply) (typ) (V) -0.2 THD + N at 1 kHz (typ) (%) 0.00005
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 18 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Vos (offset voltage at 25°C) (max) (mV) 0.12 Offset drift (typ) (µV/°C) 0.35 Input bias current (max) (pA) 10 GBW (typ) (MHz) 11 Slew rate (typ) (V/µs) 20 Rail-to-rail Out Iq per channel (typ) (mA) 1.8 Vn at 1 kHz (typ) (nV√Hz) 5.8 CMRR (typ) (dB) 140 Rating Space Operating temperature range (°C) -55 to 125 Iout (typ) (A) 0.03 Architecture FET Input common mode headroom (to negative supply) (typ) (V) -0.1 Input common mode headroom (to positive supply) (typ) (V) -3.5 Output swing headroom (to negative supply) (typ) (V) 0.2 Output swing headroom (to positive supply) (typ) (V) -0.2 THD + N at 1 kHz (typ) (%) 0.00005
TSSOP (PW) 14 32 mm² (5 mm × 6.4 mm)
  • Radiation tolerant
    • Single even latch-up (SEL) immune to 43 MeV•cm2/mg
    • ELDRS free to 30 krad(Si)
    • Total ionizing dose (TID) RLAT for every wafer lot up to 30 krad(Si)
  • Space enhanced plastic
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Very-low offset drift: 1 µV/°C maximum
  • Very-low offset: 120 µV
  • Low input bias current: 10 pA maximum
  • Low noise: 5.1 nV/√Hz
  • Slew rate: 20 V/µs
  • Low supply current: 2 mA maximum
  • Input voltage range includes V– supply
  • Wide supply range: 4.5 V to 18 V
  • Radiation tolerant
    • Single even latch-up (SEL) immune to 43 MeV•cm2/mg
    • ELDRS free to 30 krad(Si)
    • Total ionizing dose (TID) RLAT for every wafer lot up to 30 krad(Si)
  • Space enhanced plastic
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Very-low offset drift: 1 µV/°C maximum
  • Very-low offset: 120 µV
  • Low input bias current: 10 pA maximum
  • Low noise: 5.1 nV/√Hz
  • Slew rate: 20 V/µs
  • Low supply current: 2 mA maximum
  • Input voltage range includes V– supply
  • Wide supply range: 4.5 V to 18 V

The OPA4H014-SEP is a low-power JFET input operational amplifier (op amp) that features good drift and low input bias current. With an input range that includes V– and a rail-to-rail output, designers can take advantage of the low-noise characteristics of JFET amplifiers while interfacing to single-supply, precision analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).

The OPA4H014-SEP achieves 11‑MHz unity-gain bandwidth and 20-V/µs slew rate, while consuming only 1.8 mA (typical) of quiescent current. This device runs on a single 4.5‑V to 18‑V supply or dual ±2.25‑V to ±9‑V supplies.

The op amp is built in a plastic, 14‑pin, TSSOP package with radiation hardness up to 43 MeV•cm2/mg (SET) and is ELDRS free up to 30 krad(Si).

The OPA4H014-SEP is a low-power JFET input operational amplifier (op amp) that features good drift and low input bias current. With an input range that includes V– and a rail-to-rail output, designers can take advantage of the low-noise characteristics of JFET amplifiers while interfacing to single-supply, precision analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).

The OPA4H014-SEP achieves 11‑MHz unity-gain bandwidth and 20-V/µs slew rate, while consuming only 1.8 mA (typical) of quiescent current. This device runs on a single 4.5‑V to 18‑V supply or dual ±2.25‑V to ±9‑V supplies.

The op amp is built in a plastic, 14‑pin, TSSOP package with radiation hardness up to 43 MeV•cm2/mg (SET) and is ELDRS free up to 30 krad(Si).
filter Find other Precision op amps (Vos<1mV)
Download View video with transcript Video

Technical documentation

No results found. Please clear your search and try again.
View all 11
Top documentation Type Title Format options Date
* Data sheet OPA4H014-SEP 11-MHz, Precision, Low-Noise, RRO, JFET Op Amp in Space‑Enhanced Plastic datasheet (Rev. A) PDF | HTML Apr 17, 2022
* Radiation & reliability report OPA4H014-SEP Single Event Latchup Report PDF | HTML May 20, 2024
* Radiation & reliability report OPA4H014-SEP Total Ionizing Dose Report PDF | HTML Nov 8, 2023
* Radiation & reliability report OPA4H014-SEP Production Flow and Reliability Report PDF | HTML Nov 8, 2023
* Radiation & reliability report OPA4H014-SEP Neutron Displacement Damage Characterization Report PDF | HTML Nov 8, 2023
* VID OPA4H014-SEP VID V62/21607 Feb 27, 2024
Application brief TI's Space Grade Precision ADCs in Laser Communication Terminals (Rev. A) PDF | HTML Jul 9, 2026
Application note Space ADC Circuit Cookbook PDF | HTML May 11, 2026
Technical article How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A) PDF | HTML Dec 18, 2023
Circuit design Rad.-Tol., 30-krad, Comparing Current Sensing Amp W/ Second Stage Buffer to ADC PDF | HTML May 19, 2022
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML Mar 7, 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADC168M102REVM-PDK — ADC168M102R-SEP evaluation module

The ADC168M102R evaluation module (EVM) performance demonstration kit (PDK) is a platform for evaluating the performance of the ADC168M102R-SEP, a 16-bit, 8-channel 1MSPS simultaneous-sampling analog-to-digital converter (ADC). The evaluation kit includes the ADC168M102REVM board and the precision (...)
User guide: PDF | HTML
Supported products & hardware
In stock
Limit:
??asset.out-of-stock-ti_en_US??
Not available
Evaluation board

AMP-PDK-EVM — Amplifier performance development kit evaluation module

The amplifier performance development kit (PDK) is an evaluation module (EVM) kit to test common operational amplifier (op amp) parameters and is compatible with most op amps and comparators. The EVM kit offers a main board with several socketed daughtercard options to fit package needs, allowing (...)

User guide: PDF | HTML
Supported products & hardware
Evaluation board

DIP-ADAPTER-EVM — DIP adapter evaluation module

Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)

Supported products & hardware
In stock
Limit:
??asset.out-of-stock-ti_en_US??
Not available
Simulation model

OPA4H014-SEP PSpice Model (Rev. A)

SBOMC17A.ZIP (31 KB) - PSpice model
Supported products & hardware
Simulation model

OPA4H014-SEP TINA-TI Reference Design

SBOMC11 (344 KB) - TINA-TI reference design
Supported products & hardware
Simulation model

OPA4H014-SEP TINA-TI Spice Model

SBOMC10.ZIP (10 KB) - TINA-TI Spice model
Supported products & hardware
Calculation tool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Supported products & hardware
Calculation tool

OPAMP-NOISECALC — Noise Calculator

This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:

  • A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
Supported products & hardware
Package Pins CAD symbols, footprints & 3D models
TSSOP (PW) 14 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos