Top
IoT enabled High performance 32-bit ARM® Cortex®-M4F based MCU

TM4C1294NCPDT

ACTIVE

Product details

Parameters

Flash (KB) 1024 RAM (KB) 256 ADC channels 20 ADC resolution (bits) 12 GPIO 90 I2C 10 USB D, H/D or OTG OTG USB high-speed with ULPI Yes 10/100 ENET MAC No 10/100 ENET MAC+PHY Yes LCD controller No open-in-new Find other Other MCUs

Package | Pins | Size

TQFP (PDT) 128 256 mm² 16 x 16 open-in-new Find other Other MCUs

Features

  • Performance
    • ARM® Cortex™-M4F processor core
    • 120-MHz operation; 150 DMIPS performance
    • 1024 KB Flash memory
    • 256 KB single-cycle System SRAM
    • 6KB of EEPROM
    • Internal ROM loaded with TivaWare™ for C Series software
    • 8-/16-/32- bit dedicated External Peripheral Interface (EPI) for peripherals and memory
  • Security
    • Cyclical Redundancy Check (CRC) hardware with 16-/32-bit Hash function that supports four CRC forms
    • Support for four tamper inputs and configurable tamper event response
  • Communication Interfaces
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs)
    • Four Quad Synchronous Serial Interface (QSSI) modules with Bi-, Quad- and advanced SSI support
    • Ten Inter-Integrated Circuit (I2C) modules with four transmission speeds including high-speed mode
    • Two Controller Area Network (CAN) 2.0 A/B controllers
    • 10/100 Ethernet MAC
    • Ethernet PHY with IEEE 1588 PTP hardware support
    • Universal Serial Bus (USB) 2.0 OTG/Host/Device with ULPI interface option and Link Power Management (LPM) support
  • System Integration
    • ARM® PrimeCell® 32-channel configurable Micro Direct Memory Access (µDMA) controller
    • Eight 16/32-bit General-Purpose Timer (GPTM) blocks
    • Two watchdog timers
    • Low-power battery-backed Hibernation module
    • 15 physical General-Purpose Input/Output (GPIO) blocks
  • Advanced Motion Control
    • One Pulse Width Modulator (PWM) module, with four PWM generator blocks and a control block, for a total of 8 PWM outputs
    • One Quadrature Encoder Interface (QEI) module
  • Analog Support
    • Two 12-bit Analog-to-Digital Converter (ADC) modules, each with a maximum sample rate of one million samples/second
    • Three independent integrated analog comparators
    • 16 digital comparators
  • One JTAG module with integrated ARM Serial Wire Debug (SWD)
  • 128-pin TQFP package
  • Operating Range (Ambient)
    • Industrial (-40°C to 85°C) temperature range
    • Extended (-40°C to 105°C) temperature range
open-in-new Find other Other MCUs

Description

Tiva™ C Series microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical, real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human machine interface to networked system management controllers.

In addition, Tiva™ C Series microcontrollers offer the advantages of ARM's widely available development tools, System-on-Chip (SoC) infrastructure, and a large user community. Additionally, these microcontrollers use ARM's Thumb®-compatible Thumb-2 instruction set to reduce memory requirements and, thereby, cost. Finally, the TM4C1294NCPDT microcontroller is code-compatible to all members of the extensive Tiva™ C Series, providing flexibility to fit precise needs.

Texas Instruments offers a complete solution to get to market quickly, with evaluation and development boards, white papers and application notes, an easy-to-use peripheral driver library, and a strong support, sales, and distributor network.

open-in-new Find other Other MCUs
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 46
Type Title Date
* Datasheet Tiva C Series TM4C1294NCPDT Microcontroller Data Sheet datasheet (Rev. B) Jun. 19, 2014
* Errata Corrections to Tiva™ TM4C123x/TM4C129x Data Sheets Manual Update Sheet May 17, 2019
* Errata Tiva C Series TM4C129x Microcontrollers Silicon Revisions 1, 2, & 3 Errata (Rev. G) Mar. 29, 2017
* Errata ARM® Cortex™-M4F Errata (v3) Dec. 15, 2011
Technical articles Benefits of using Sub-1 GHz connectivity for grid asset monitoring, protection and control May 28, 2020
User guides TivaWare™ Graphics Library for C Series User's Guide (Rev. E) May 14, 2020
User guides TivaWare™ Peripheral Driver Library for C Series User's Guide (Rev. E) May 14, 2020
User guides TivaWare™ Sensor Library for C Series User's Guide (Rev. E) May 14, 2020
User guides TivaWare™ USB Library for C Series User's Guide (Rev. E) May 14, 2020
Application notes IoT Demo Using EK-TM4C1294XL LaunchPad Feb. 17, 2020
User guides TivaWare™ Bootloader for C Series User's Guide (Rev. E) Dec. 19, 2019
User guides TivaWare™ for C Series Release Notes SW-TM4C-RLN-2.2.0.295 (Rev. F) Dec. 05, 2019
Application notes TM4C1294 interface to ADS7142 software library (Rev. A) Jan. 11, 2019
Application notes TM4C1294 Interface to ADS7142 Software Library Jul. 10, 2018
Application notes 1-Wire Enumeration (Rev. C) Jan. 09, 2018
Application notes Using TM4C12x Devices Over JTAG Interface Aug. 18, 2016
Application notes Implementing OPUS Voice Code for TM4C129x Device Jun. 20, 2016
User guides TI-RTOS 2.20 User's Guide (Rev. M) Jun. 17, 2016
User guides TI-RTOS 2.16 User's Guide (Rev. L) Feb. 22, 2016
Application notes Using the CMSIS DSP Library in Code Composer Studio for TM4C MCUs (Rev. G) Oct. 07, 2015
Application notes Using Feature Set of I2C on TM4C129x Microcontrollers Jul. 28, 2015
Technical articles How fast is your 32-bit MCU? Jul. 15, 2015
Technical articles Easily increase functionality in motor drive applications May 19, 2015
Technical articles Really smart cities in real time Apr. 25, 2015
Application notes Serial to Ethernet Converter for TM4C129x Microcontrollers Using RTOS Mar. 31, 2015
White papers Building a Gateway to the Internet of Things Dec. 15, 2014
Selection guides TM4C Microcontrollers (Rev. D) Oct. 14, 2014
User guides Tiva C Series TM4C129x ROM User's Guide (Rev. A) May 14, 2014
White papers Turning the Cloud into a Rainmaker (Rev. A) Apr. 25, 2014
More literature Tiva C Series TM4C1294NCPDT Micocontroller Pin List (Rev. A) Dec. 17, 2013
Application notes Differences Between Stellaris Tempest & Firestorm-Class MCUs and Tiva TM4C129x Oct. 22, 2013
Application notes Differences Between Tiva C Series TM4C Microcontrollers Oct. 22, 2013
Application notes Transitioning Designs From Stellaris LM3S Microcontrollers to Tiva C Series MCUs (Rev. A) Oct. 22, 2013
Application notes System Design Guidelines for the TM4C123x Family of Tiva C Series MCUs Jul. 31, 2013
Application notes System Design Guidelines for the TM4C129x Family of Tiva C Series MCUs Jul. 16, 2013
Application notes Stellaris® Graphics Library Display Drivers (AN01287) (Rev. A) Jul. 09, 2013
Application notes Stellaris Application Update Using Stellaris USB DFU Class (AN01273) (Rev. A) Jul. 08, 2013
Application notes Dual-SPI Emulating I²S on Tiva™ C Series TM4C123x MCUs (Rev. B) Jun. 12, 2013
Application notes Migrating Software Projects from StellarisWare to TivaWare for C Series Software (Rev. A) May 01, 2013
White papers An Introduction to the Tiva C Series Platform of Microcontrollers Apr. 12, 2013
Application notes Powering Cortex-M4 MCUs Using the High Efficiency DCS-Control Topology Feb. 03, 2013
Application notes ADC Oversampling Techniques for Stellaris Microcontrollers (AN01239) (Rev. A) Jan. 08, 2013
Application notes Using SYS/BIOS with Stellaris® ARM® Cortex™-M3 Microcontrollers (Rev. A) Nov. 19, 2012
Application notes Using Execute, Write/Erase Flash Protection on Stellaris MCUs Using CCS (Rev. A) Aug. 15, 2012
Application notes Diagnosing Software Faults in Stellaris® Microcontrollers Jun. 04, 2012
Application notes Software UART for Stellaris Microcontrollers (AN01270) Jul. 07, 2009

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
$299.00
Description

Step 1: Buy this EVM (AWR1243BOOST)
Step 2: Download the mmWave DFP
Step 3: Take the mmWave sensor device trainings
Step 4: Review the white paper

The AWR1243 BoosterPack™ plug-in module is an easy-to-use evaluation board for the single-chip AWR1243 mmWave sensing device, with (...)

Features
  • Onboard antenna enables field testing
  • XDS110-based JTAG with serial port interface for flash programming
  • UART-to-USB interface for control, configuration, and data visualization
  • TI LaunchPad development-kit interface to seamlessly connect to TI MCUs
  • CAN connector enables direct interface to car units
EVALUATION BOARDS Download
document-generic User guide
$299.00
Description

Step 1: Buy this EVM (AWR1443BOOST)
Step 2: Download the mmWave SDK
Step 3: Take the mmWave sensor device trainings
Step 4: Review the white paper on diverse proximity sensing applications

The AWR1443 BoosterPack™ plug-in module is an easy-to-use evaluation board for the single-chip (...)

Features
  • Onboard antenna enables field testing
  • XDS110-based JTAG with serial-port interface for flash programming
  • UART-to-USB interface for control, configuration, and data visualization
  • TI LaunchPad development-kit interface to seamlessly connect to TI MCUs
  • CAN connector enables direct interface to car units
EVALUATION BOARDS Download
document-generic User guide
$299.00
Description

Step 1: Buy this EVM (AWR1843BOOST)
Step 2: Download mmWave SDK
Step 3: Take the mmWave sensor device trainings
Step 4: Evaluate performance for short-range or medium-range radar and automated parking applications

The AWR1843 BoosterPack™ plug-in module is an easy-to-use evaluation (...)

Features
  • Onboard antenna enables field testing
  • XDS110-based JTAG with serial-port interface for flash programming
  • UART-to-USB interface for control, configuration, and data visualization
  • TI LaunchPad development-kit interface to seamlessly connect to TI MCUs
  • CAN connector enables direct interfact to car units
EVALUATION BOARDS Download
document-generic User guide
$349.00
Description

The AWR2243 BoosterPack™ plug-in module is an easy-to-use evaluation board for the single-chip AWR2243 mmWave sensing device.

AWR2243BOOST contains everything required to start developing using the MMWAVE-STUDIO environment and the DCA1000 real-time data capture adapter.

The standard 20-pin BoosterPack (...)

Features
  • Onboard antenna enables field testing
  • Standard interface for DCA1000 connectivity and MMWAVE-STUDIO for raw data capture
  • TI LaunchPad development-kit interface to seamlessly connect to TI MCUs
EVALUATION BOARDS Download
document-generic User guide
$19.99
Description

The TM4C1294 Connected LaunchPad Evaluation Kit is a low-cost development platform for ARM® Cortex-M4F-based microcontrollers. The Connected LaunchPad design highlights the TM4C1294NCPDT MCU with its on-chip 10/100 Ethernet MAC and PHY, USB 2.0, hibernation module, motion control pulse-width (...)

Features
  • High Performance TM4C1294NCPDT MCU:
    • 120MHz 32-bit ARM Cortex-M4 CPU
    • 1MB Flash, 256KB SRAM, 6KB EEPROM
    • Integrated 10/100 Ethernet MAC+PHY, data protection hardware, 8x 32-bit timers
    • Dual 12-bit 2MSPS ADCs, motion control PWMs
    • USB H/D/O, and many additional serial communication interfaces
  • Dual, stackable (...)
EVALUATION BOARDS Download
document-generic User guide
$24.99
Description

Powered by hardware encryption accelerator-enabled MCUs, the  Crypto Connected LaunchPad enables you to develop high performance, data protected, connected IoT applications from secure cloud connection, building/factory automation and smart grid to industrial controls.

The TM4C129E Crypto Connected (...)

Features
  • High performance TM4C129ENCPDT MCU:
    • 120MHz 32-bit ARM® Cortex®-M4-based microcontrollers CPU with floating point
    • 1MB Flash, 256KB SRAM, 6KB EEPROM
    • Crypto acceleration hardware
    • Integrated 10/100 Ethernet MAC+PHY, 8x 32-bit timers
    • Dual 12-bit 2MSPS ADCs, motion control PWMs
    • USB H/D/O, and many additional (...)
EVALUATION BOARDS Download
document-generic User guide
Description

The IWR1443 BoosterPack™ plug-in module is an easy-to-use evaluation board for the single-chip IWR1443 mmWave sensing device, with direct connectivity to the TI MCU LaunchPad™ development-kit ecosystem.

IWR1443BOOST contains everything required to start developing on a low-power Arm® (...)

Features
  • Onboard antenna enables field testing
  • XDS110-based JTAG with serial-port interface for flash programming
  • UART-to-USB interface for control, configuration, and data visualization
  • TI LaunchPad development-kit interface to seamlessly connect to TI MCUs
  • CAN connector enables direct interface to car units
EVALUATION BOARDS Download
document-generic User guide
$299.00
Description

The IWR1843 BoosterPack™ plug-in module is an easy-to-use evaluation board for the single-chip IWR1843 mmWave sensing device, with direct connectivity to the TI MCU LaunchPad™ development-kit ecosystem.

IWR1843BOOST contains everything required to start developing on a low-power Arm® (...)

Features
  • Onboard antenna enables field testing
  • XDS110-based JTAG with serial-port interface for flash programming
  • UART-to-USB interface for control, configuration, and data visualization
  • TI LaunchPad development-kit interface to seamlessly connect to TI MCUs
  • CAN connector enables direct interfact to car units
EVALUATION BOARDS Download
document-generic User guide
$199.00
Description

MMWAVEICBOOST carrier card platform enables rapid evaluation of an mmWave sensor by providing modular interface to various sensor and antenna kits. This carrier card enables debug, emulation, and direct interface to mmWave tools through USB connectivity. Raw analog-to-digital (...)

Features
  • Modular connectivity to mmWave antenna plug-in module
  • BoosterPack™ plug-in module interface
  • Debug and emulation through onboard XDS110
  • DCA1000EVM interface for raw ADC data capture
  • Compatible with mmWave studio (MMWAVE-STUDIO) tools, including mmWave demo visualizer (MMWAVE-DEMO-VISUALIZER)
EVALUATION BOARDS Download
document-generic User guide
$898.00
Description

The AM65x Evaluation Module provides a platform to quickly start evaluation of Sitara™ Arm® Cortex®-A53 AM65x Processors (AM6548AM6546AM6528AM6527AM6526) and accelerate development for HMI, networking, patient monitoring, and other industrial applications. It is a development platform based on (...)

Features
  • 3 gigabit Ethernet ports
  • 4GB DDR4 with ECC
  • On-board 16GB eMMC
  • On-board 512Mb OSPI Flash
  • 1-lane PCIe Gen3.1, USB 3.1, USB 2.0 and CSI-2 interfaces
EVALUATION BOARDS Download
document-generic User guide
$819.00
Description

Step 1: Order the IDK
Step 2: Download the Processor SDK
Step 3: Get the industrial protocol package
Step 4: Read the hardware user's guide

The AM65x Industrial Development Kit (IDK) is a development platform for evaluating the industrial communication and control capabilities of Sitara AM65x (...)

Features
  • Up to 6 industrial gigabit Ethernet ports and 1 standard gigabit Ethernet port that can be used concurrently
  • 4GB DDR4 with ECC
  • Profibus connection and industrial I/O header
  • On-board 16GB eMMC
  • On-board 512Mb OSPI Flash
  • 2-lane PCIe Gen3.1, USB 2.0 and CSI-2 interfaces
DEVELOPMENT KITS Download
document-generic User guide
$199.00
Description

The TM4C129x Connected Development Kit is a versatile and feature-rich engineering platform that highlights the 120-MHz TM4C129XNCZAD IoT Enabled ARM Cortex-M4F based microcontroller, including an integrated 10/100 Ethernet MAC + PHY as well as many other key features.

Features

The IoT Enabled ARM Cortex-M4F MCU TM4C129X Connected Development Kit offers these features:

  • Color LCD interface
  • USB 2.0 OTG | Host | Device port
  • TI wireless EM connection
  • BoosterPack™ and BoosterPack XL interfaces
  • Quad SSI-supported 512-Mbit Flash memory
  • MicroSD slot
  • Expansion interface headers: MCU (...)

Software development

SOFTWARE DEVELOPMENT KITS (SDK) Download
TivaWare™ for C Series (Complete)
SW-TM4C TivaWare™ software for C Series is an extensive suite of software tools designed to simplify and speed development of Tiva C Series-based MCU applications. All TivaWare for C Series software has a free license, and allows royalty-free use so users can create and build full-function (...)
DEBUG PROBES Download
SimpleLink SensorTag Debugger DevPack
CC-DEVPACK-DEBUG The Debugger DevPack adds debug capability to your SensorTag. Plug it into the SensorTag DevPack expansion header and debug your SensorTag with Code Composer Studio or IAR ARM development environments. The Debugger DevPack includes a FREE license of Code Composer Studio that is tied to the DevPack.

(...)

$15.00
DEBUG PROBES Download
XDS100v2 JTAG Debug Probe (14-pin TI version)
TMDSEMU100V2U-14T — The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest cost of all the XDS family of debug probes while supporting the traditional JTAG standard (IEEE1149.1). Also, all XDS debug probes support (...)
Features

The XDS100v2 is the second generation of the XDS100 family of low cost JTAG debug probes (emulators) for TI processors. Designed to deliver full featured JTAG connectivity at a low cost, the XDS100 is the family of choice for entry-level debugging of TI microcontrollers, processors and wireless (...)

DEBUG PROBES Download
XDS200 USB Debug Probe
TMDSEMU200-U The Spectrum Digital XDS200 is the first model of the XDS200 family of debug probes (emulators) for TI processors. The XDS200 family features a balance of low cost with good performance between the super low cost XDS110 and the high performance XDS560v2, while supporting a wide variety of standards (...)
$295.00
Features

The XDS200 is the mid-range family of JTAG debug probes (emulators) for TI processors. Designed to deliver good performance and the most common features that place it between the low cost XDS110 and the high performance XDS560v2, the XDS200 is the balanced solution to debug TI microcontrollers (...)

DEBUG PROBES Download
XDS560v2 System Trace USB Debug Probe
TMDSEMU560V2STM-U The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

$995.00
Features

XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity (...)

DEBUG PROBES Download
XDS560v2 System Trace USB & Ethernet Debug Probe
TMDSEMU560V2STM-UE The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

$1,495.00
Features
  • XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity (...)

DRIVERS & LIBRARIES Download
Stellaris® ICDI Drivers
STELLARIS_ICDI_DRIVERS Tiva™ C Series evaluation and reference design kits provide an integrated In-Circuit Debug Interface (ICDI) which allows programming and debugging of the onboard C Series microcontroller. The ICDI can be used with the LM Flash Programmer as well as any of the Tiva-supported toolchains such as Texas (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Code Composer Studio (CCS) Integrated Development Environment (IDE) for TM4x ARM MCUs
CCSTUDIO-TM4X Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)
PROGRAMMING TOOLS Download
Features

LM Flash Programmer is also compatible with a Stellaris microcontroller custom board if the board has a serial (UART) interface, Ethernet interface, USB interface, or a standard JTAG connector. For the JTAG connector, a Stellaris evaluation board can be used as an In-Circuit Debug Interface.

PROGRAMMING TOOLS Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3220, CC3120, CC3235, CC3135, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool (...)

SUPPORT SOFTWARE Download
SPMC023A.ZIP (29 KB)

Design tools & simulation

SIMULATION MODELS Download
SPMM809.ZIP (4 KB) - BSDL Model
SIMULATION MODELS Download
SPMM829.ZIP (894 KB) - IBIS Model
CALCULATION TOOLS Download
Pin mux tool
PINMUXTOOL The Pin MUX Utility is a software tool which provides a Graphical User Interface for configuring pin multiplexing settings, resolving conflicts and specifying I/O cell characteristics for TI MPUs. Results are output as C header/code files that can be imported into software development kits (SDKs) or (...)
SCHEMATICS Download
SPMR237.ZIP (15 KB)
SCHEMATICS Download
SPMR238.ZIP (55 KB)
SCHEMATICS Download
SPMR239.PDF (255 KB)

Reference designs

参考设计 Download
Vehicle occupant detection reference design
TIDEP-01001 This reference design demonstrates the use of the AWR6843 60GHz single-chip mmWave sensor with integrated DSP, as a Vehicle Occupant Detection (VOD) and Child Presence Detection (CPD) Sensor enabling the detection of life forms in a vehicle. This design provides a reference software processing chain (...)
document-generic Schematic document-generic User guide
参考设计 Download
Short-range radar (SRR) reference design
TIDEP-0092 The TIDEP-0092 reference design provides a foundation for short-range radar (SRR) applications using the AWR1642 evaluation module (EVM). This design allows the estimation and tracking of the position (in the azimuthal plane) and velocity of objects in its field of view up to 80 m,  travelling (...)
document-generic Schematic document-generic User guide
参考设计 Download
People Counting and Tracking Reference Design Using mmWave Radar Sensor
TIDEP-01000 This reference design demonstrates the use of IWR6843, which is a single-chip mmWave radar sensor with integrated DSP for an indoor and outdoor people counting application. This reference design uses the IWR6843ISK evaluation module (EVM) and integrates a complete radar processing chain onto the (...)
document-generic Schematic document-generic User guide
参考设计 Download
Beamsteering for corner radar reference design
TIDEP-01021 This reference design provides a foundation for blind-spot detection (BSD), cross-traffic alert (CTA), lane-change assist (LCA), and traffic-jam assist (TJA) applications using the AWR1843BOOST evaluation module (EVM). This design allows the estimation (in the azimuthal and elevation plane (...)
document-generic Schematic document-generic User guide
参考设计 Download
Grid IoT Reference Design: Connecting Fault Indicators, Data Collector, Mini-RTU Using Sub-1GHz RF
TIDA-00816 — The TIDA-00816 reference design has wireless sub-1 GHz communication in a star network between multiple sensor nodes (in this case, fault passage indicators) and a collector using the TI 15.4-stack. This design is optimized for low power consumption for short range (< 50 m) using overhead fault (...)
document-generic Schematic document-generic User guide
参考设计 Download
Traffic Monitoring Object Detection and Tracking Reference Design Using mmWave Radar Sensor
TIDEP-0090 — This reference design demonstrates how our single-chip millimeter-wave (mmWave) technology can be used for robust, long-range sensing in traffic monitoring and other applications. The reference design can use the  IWR1642BOOST evaluation module (EVM) or the IWR1843BOOST evaluation module (EVM (...)
document-generic Schematic document-generic User guide
参考设计 Download
Battery Tester Reference Design for High Current Applications
TIDA-01040 — Li-Ion battery formation and electrical testing require accurate voltage and current control, usually to better than ±0.05% over the specified temperature range.  This reference design proposes a solution for high-current (up to 50 A) battery tester applications supporting input (bus (...)
document-generic Schematic document-generic User guide
参考设计 Download
Battery tester reference design for multi-phase high-precision 0.5 to 100 A battery formation
TIDA-01041 — This reference design provides a multi-phase solution for a wide range of current battery test applications. Leveraging the dual phase buck/boost controller LM5170's daisy chain configuration gives the design the ability to achieve 100A charging/discharging rates. Utilizing high accuracy constant (...)
document-generic Schematic document-generic User guide
参考设计 Download
Simple 6LoWPAN Mesh End-Node Improves Network Performance Reference Design
TIDA-010003 — This reference design implements a simple RF mesh network end node for smart meter Advanced Metering Infrastructure (AMI) networks. The network is an IPv6 over low-power wireless personal area networks (6LoWPAN) solution. The design implements this network in a single CC1310 SimpleLink&trade (...)
document-generic Schematic document-generic User guide
参考设计 Download
Secured 6LoWPAN mesh end-node with enhanced network capacity reference design
TIDA-010024 — This reference design implements an RF mesh network end node with DTLS security for smart meter Advanced Metering Infrastructure (AMI) networks. The network is an IPv6 over low-power wireless personal area networks (6LoWPAN) solution. The design implements this network in a single CC1312R (...)
document-generic Schematic document-generic User guide
参考设计 Download
Simple 6LoWPAN Mesh Data Collector Improves Network Performance Reference Design
TIDA-01547 — TIDA-01547 reference design implements a simple mesh network data collector for smart meter Advanced Metering Infrastructure (AMI) networks. The network is an IPv6 over Low-Power Wireless Personal Area Networks (6LoWPAN) solution. The data collector implements a complete software stack split (...)
document-generic Schematic document-generic User guide
参考设计 Download
Automated parking system reference design using 77-GHz mmWave sensor
TIDEP-01011 This reference design demonstrates the use of AWR1843, a 77-GHz single-chip mmWave sensor with integrated DSP, MCU, and hardware accelerator as an automated parking sensor, which enables robust detection of objects around a car in challenging parking and environmental conditions. With a range (...)
document-generic Schematic document-generic User guide
参考设计 Download
Modular battery tester reference design for 50-A, 100-A, and 200-A applications
TIDA-01042 — This reference design provides a modular battery test solution allowing users to have the flexibility to test batteries at different current levels with one design. This design leverages the TIDA-01041 reference design by providing two 100-A battery testers that can work independently or be (...)
document-generic Schematic document-generic User guide
参考设计 Download
Execute from SDRAM with code storage in NVM for high performance MCU
TIDM-TM4C129SDRAMNVM This reference design demonstrates how to implement and interface Non Volatile Memory and SDRAM to the performance microcontroller TM4C1294NCPDT in TM4C product family. The implementation is made possible by using the EPI Interface of the Microcontroller to interface a 256Mbit SDRAM at 60MHz and (...)
document-generic Schematic document-generic User guide
参考设计 Download
DLP Ultra-mobile NIR Spectrometer for Portable Chemical Analysis with Bluetooth Connectivity
TIDA-00554 The ultra-mobile near-infrared (NIR) spectrometer reference design utilizes Texas Instruments' DLP technology in conjunction with a single-element InGaAs detector to deliver high performance measurements in a portable form factor that is more affordable than architectures using an expensive InGaAs (...)
document-generic Schematic document-generic User guide
Design files
参考设计 Download
Universal data concentrator reference design supporting Ethernet, 6LoWPAN RF mesh and more
TIDA-010032 — IPv6-based grid communications are becoming the standard choice in industrial markets and applications like smart meters and grid automation. The universal data concentrator design provides a complete IPv6-based network solution integrated with Ethernet backbone communication, 6LoWPAN RF mesh (...)
document-generic Schematic document-generic User guide
参考设计 Download
Obstacle detection reference design using 77-GHz mmWave sensor
TIDEP-0104 This reference design demonstrates the use of the AWR1642 single-chip mmWave sensor with integrated DSP as an obstacle-detection sensor for the car door and trunk, enabling applications like automatic car door openers and intelligent car doors that can accurately detect obstacles/objects in a (...)
document-generic Schematic document-generic User guide
参考设计 Download
80m-Range Object Detection Reference Design With Integrated Single-Chip mmWave Sensor
TIDEP-0094 TI Design TIDEP-0094 provides a foundation to evaluate object detection using the IWR1642 evaluation module (EVM). This design integrates a complete radar processing chain onto the IWR1642 device to enable the estimation of the position (in the azimuthal plane) and the velocity of (...)
document-generic Schematic document-generic User guide
参考设计 Download
Secure IoT Gateway Reference Design for Bluetooth® Low Energy, Wi-Fi® and Sub-1 GHz Nodes
TIDM-TM4C129XGATEWAY — A system example demonstrating how to build a secure cloud-connected IoT gateway allowing access and control of the multiple wireless nodes.  The reference design utilizes the TM4C12x, TM4C123x, TRF7970A and RF430CL330H, as well as the SimpleLink™ Wi-Fi® CC3100, Bluetooth® low energy CC2650 and (...)
document-generic Schematic document-generic User guide
参考设计 Download
Camera Reference Design for ARM® Cortex®-M Microcontrollers (MCUs)
TIDM-TM4C129CAMERA This design implements a network camera with a QVGA display panel and an embedded web server for remote monitoring.  With a memory footrpint of 250KB for the web server, there is ample memory available on the TM4C129x microcontroller for additional customizations.
document-generic Schematic document-generic User guide
参考设计 Download
USB High Speed Reference Design for ARM® Cortex®-M4F Based High Speed TM4C129x MCU
TIDM-TM4C129USBHS — This design uses TI's high-performance ARM® Cortex®-M4F based TM4C129x microcontrollers (MCUs) with integrated USB 2.0 controller to interface with an external High Speed USB PHY. The design includes software that allows data exchange between USB high speed and Ethernet. The design also (...)
document-generic Schematic document-generic User guide
参考设计 Download
Data Concentrator Reference Design for Smaller AMI Networks Reduces Infrastructure Cost
TIDM-MINI-DC — The TIDM-MINI-DC reference design implements a light-weight powerline communication (PLC) data concentrator (DC) solution integrated with an Ethernet repeater feature. A power grid network is static, which means that once end-nodes are installed the number of nodes to be supported by a DC is fixed (...)
document-generic Schematic document-generic User guide
参考设计 Download
Audio Communication With Power Over Ethernet (PoE) Reference Design
TIDM-TM4C129POEAUDIO — This design uses Texas Instrument's high performance TM4C129x microcontrollers (MCUs) with integrated Ethernet PHY to capture, exchange and playback audio efficiently with power supplied over the network (PoE solution) instead of separate external power sources. The application uses TivaWare (...)
document-generic Schematic document-generic User guide
参考设计 Download
TM4C129POE Power Over Ethernet (PoE) Reference Design for Connected IoT
TIDM-TM4C129POE — This design integrates Texas Instruments PoE solutions with TM4C129x high performance microcontrollers to enable customers to develop applications for IoT in a small form factor board. Ability to derive power over existing network cable with intelligence to gather, process and exchange data with the (...)
document-generic Schematic document-generic User guide
参考设计 Download
Sub-1 GHz–Enabled IoT Node on High-Performance Microcontroller Reference Design
TIDM-TM4C123XSUB1GHZ — A system example to show how to build a Sub-1 GHz node by integrating a TM4C123x MCU and a SimpleLink™ CC1310 ultra-low-power wireless MCU. It demostatrates the capability of remotely controlling MCU operation via the web.
document-generic Schematic document-generic User guide
参考设计 Download
Wi-Fi Enabled IoT Node with High Performance MCU Reference Design
TIDM-TM4C129XWIFI A system example to show how to build a Wi-Fi Node by integrating the TM4C1294 MCU from the TM4C product family and the CC3100 network processor. This reference design demonstrates the capability of remotely controlling MCU operation via the internet.
document-generic Schematic document-generic User guide
参考设计 Download
Interfacing SDRAM Memory on High Performance Microcontrollers
TIDM-TM4C129XSDRAM This reference design demonstrates how to implement and interface SDRAM Memory to the performance microcontroller TM4C129XNCZAD. The implementation is made possible by using the EPI Interface of the Microcontroller to interface a 256Mbit SDRAM at 60MHz which allows developers to implement additional (...)
document-generic Schematic document-generic User guide
参考设计 Download
Wi-Fi Enabled IoT Node With NFC Connection Handover Reference Design
TIDM-TM4C129XNFC Configuring Wi-Fi network connection parameters in embedded applications can be completed  with a simple tap using NFC technology. This reference design illustrates NFC connection handover (pairing) and URL sharing with a Wi-Fi node using a TM4C1294 high-performance microcontroller, CC3100 (...)
document-generic Schematic document-generic User guide
参考设计 Download
BLE Enabled IoT Node With High Performance MCU Reference Design
TIDM-TM4C129XBLE A system example to show how to build a BLE Node by integrating a TM4C1294 MCU from the TM4C product family and a CC2650 device. This reference design demostatrates the capability of remotely controlling MCU operation via the internet.
document-generic Schematic document-generic User guide
参考设计 Download
Bluetooth Low Energy for Energy Monitoring Reference Design
TIDC-BLE-METER-READING The TIDC-BLE-METER-READING reference design focuses on an application for reading an energy monitor device over a Bluetooth® Low Energy (BLE) link using the SimpleLink™ CC2650 multi-standard wireless MCU and corresponding SensorTag module. The module is then connected to the hardware (with (...)
document-generic Schematic document-generic User guide
参考设计 Download
RTOS-Based Configurable Serial-to-Ethernet Converter on High Performance MCUs Reference Design
TIDM-TM4C129XS2E Legacy products may only contain a serial port and accessing such end equipments (EEs) is increasingly becoming a challenge due to the inability to add them to a shared network and access them over long distances (like remote control stations). A Serial-to-Ethernet  (S2E) converter provides a (...)
document-generic Schematic document-generic User guide
参考设计 Download
Portable ZigBee Plug-In Software Framework for any OS
TIDC-ZNP-HOST-SW3 A portable host software framework that allows ZigBee to be “bolted on” to existing products in the market, quickly enabling Internet of Things (IoT) system applications. This design can be used with any microcontrollers or processors, offering flexibility in the solution. This software framework (...)
document-generic Schematic document-generic User guide
参考设计 Download
Compact CAN-to-Ethernet Converter using 32-bit ARM Cortex-M4F MCU Reference Design
TIDA-00203 This reference design demonstrates a small form-factor Controller Access Network (CAN)-to-Ethernet converter using the TM4C129XNCZAD 32-bit ARM&reg; Cortex&trade;-M4F MCU. Supporting 10/100 Base-T compliant with IEEE 802.3 standard, this reference design is useful for industrial drives (...)
document-generic Schematic document-generic User guide
参考设计 Download
32-bit ARM® Cortex™-M4F MCU based Small form factor Serial-to-Ethernet Converter
TIDA-00226 Serial communications have been widely used in grid infrastructure equipments. But the limitation of transmission distance and bandwidth of serial communication leads to demand for a more flexible and high-speed method to meet modern smart grid network migration. Ethernet has been accepted as an (...)
document-generic Schematic document-generic User guide
参考设计 Download
Comprehensive Sensor Hub Solution with Seven On-Board Sensors
TIDM-LPBP-SENSORHUB This Sensor Hub design uses a Tiva platform for evaluating the use of ARM® Cortex™-M4-based TM4C devices in sensor fusion applications, demonstrating the mathematical and algorithm computation features of the M4 architecture. This design features seven on-board sensor functions including (...)
document-generic Schematic document-generic User guide
参考设计 Download
Evaluation Module (EM) Adaptor
TIDM-LPBP-EMADAPTER This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific (...)
document-generic Schematic document-generic User guide
参考设计 Download
Connected Ethernet, USB, and LCD Reference Design
TIDM-CONNECTED-ETHERNET This TI Design will demonstrate several ethernet- and LCD-enabled applications such as remote sensor monitoring, ethernet configuration via web-based and LCD dashboards and aware applications that interface with weather websites.
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
TQFP (PDT) 128 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​