SBOC397 — AMC80EVM-Software-B
Unterstützte Produkte und Hardware
Produkte
Digitale Temperatursensoren
- AMC80 — Energieeffizienter lokaler Temperatursensor mit Überwachung von Lüftergeschwindigkeit und Versorgung
The AMC80 is a system hardware monitoring and control circuit that includes a seven-channel, 10-bit analog-to-digital converter (ADC), two programmable fan-speed monitors, and a two-wire interface. The AMC80 also includes programmable upper over-limit and lower under-limit alarms that activate when the programmed limits are exceeded.
The AMC80 can interface with both linear and digital temperature sensors. The 2.5-mV least significant bit (LSB) and 2.56-V input range can accept inputs from a linear sensor such as the TMP20. The BTI pin is used as an input from a digital sensor such as the TMP75. The AMC80 operates from a 3-V to 5.5-V supply voltage, has low supply current, and can be configured using a two-wire interface, thus making it ideal for a wide range of applications.
The AMC80 is available in a 24-lead TSSOP package and is fully specified over the –40°C to +125°C temperature range.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | AMC80 System Hardware Monitor with Two-Wire and SMBus Serial Interface datasheet (Rev. B) | PDF | HTML | 24 Sep 2015 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| TSSOP (PW) | 24 | Ultra Librarian |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.