Home Batteriemanagement-ICs Batterieüberwachung & Ausgleichsregler
Home
Batteriemanagement-ICs
Batterieüberwachung & Ausgleichsregler

BQ769142

AKTIV

Batterieüberwachungs- und Schutzbaustein für Lithium-Ionen-, Li-Polymer- und LiFePO4-Akkupacks mit h

Jetzt bestellen
Datenblatt
Benutzerhandbücher

BQ769142

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Number of series cells (max) 14 Number of series cells (min) 3 Features Digital output, High-side driver, I2C support, LDO output, Multi-cell support, Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Short-current detection, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 80 Communication interface HDQ, I2C, SPI Device type Cell monitor and balancer Operating temperature range (°C) -40 to 85 Battery overvoltage protection (min) (V) 1.012 Battery overvoltage protection (max) (V) 5.566
Rating Catalog Number of series cells (max) 14 Number of series cells (min) 3 Features Digital output, High-side driver, I2C support, LDO output, Multi-cell support, Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Separate MCU requirement, Short-current detection, Stackable (built-in interface), Temperature sensing, Undertemperature protection, Undervoltage protection Vin (max) (V) 80 Communication interface HDQ, I2C, SPI Device type Cell monitor and balancer Operating temperature range (°C) -40 to 85 Battery overvoltage protection (min) (V) 1.012 Battery overvoltage protection (max) (V) 5.566
TQFP (PFB) 48 81 mm² 9 x 9
  • Battery monitoring capability for 3-series to 14-series cells
  • Integrated charge pump for high-side NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error < 1 µV (typical)
    • High accuracy cell voltage measurement < 10 mV (typical)
  • Wide-range current applications (±200-mV measurement range across sense resistor)
  • Integrated secondary chemical fuse drive protection
  • Autonomous or host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 286 µA
    • Multiple SLEEP mode options: 24 µA to 41 µA
    • Multiple DEEPSLEEP mode options: 9 µA to 10 µA
    • SHUTDOWN mode: 1 µA
  • High-voltage tolerance of 85 V on cell connect and select additional pins
  • Tolerant of random cell attach sequence on production line
  • Support for temperature sensing using internal sensor and up to nine external thermistors
  • Integrated one-time-programmable (OTP) memory programmable by customers on production line
  • Communication options include 400-kHz I2C, SPI, and HDQ one-wire interface
  • Dual-programmable LDOs for external system usage
  • 48-pin TQFP package (PFB)
  • Battery monitoring capability for 3-series to 14-series cells
  • Integrated charge pump for high-side NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • Two independent ADCs
    • Support for simultaneous current and voltage sampling
    • High-accuracy coulomb counter with input offset error < 1 µV (typical)
    • High accuracy cell voltage measurement < 10 mV (typical)
  • Wide-range current applications (±200-mV measurement range across sense resistor)
  • Integrated secondary chemical fuse drive protection
  • Autonomous or host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode: 286 µA
    • Multiple SLEEP mode options: 24 µA to 41 µA
    • Multiple DEEPSLEEP mode options: 9 µA to 10 µA
    • SHUTDOWN mode: 1 µA
  • High-voltage tolerance of 85 V on cell connect and select additional pins
  • Tolerant of random cell attach sequence on production line
  • Support for temperature sensing using internal sensor and up to nine external thermistors
  • Integrated one-time-programmable (OTP) memory programmable by customers on production line
  • Communication options include 400-kHz I2C, SPI, and HDQ one-wire interface
  • Dual-programmable LDOs for external system usage
  • 48-pin TQFP package (PFB)

The Texas Instruments BQ769142 device is a highly integrated, high-accuracy battery monitor and protector for 3-series to 14-series Li-ion, Li-polymer, and LiFePO4 battery packs. The device includes a high-accuracy monitoring system, a highly configurable protection subsystem, and support for autonomous or host controlled cell balancing. Integration includes high-side charge-pump NFET drivers, dual programmable LDOs for external system use, and a host communication peripheral supporting 400-kHz I2C, SPI, and HDQ one-wire standards. The BQ769142 device is available in a 48-pin TQFP package.

The Texas Instruments BQ769142 device is a highly integrated, high-accuracy battery monitor and protector for 3-series to 14-series Li-ion, Li-polymer, and LiFePO4 battery packs. The device includes a high-accuracy monitoring system, a highly configurable protection subsystem, and support for autonomous or host controlled cell balancing. Integration includes high-side charge-pump NFET drivers, dual programmable LDOs for external system use, and a host communication peripheral supporting 400-kHz I2C, SPI, and HDQ one-wire standards. The BQ769142 device is available in a 48-pin TQFP package.
filter Andere Batterieüberwachung & Ausgleichsregler suchen
Herunterladen Video mit Transkript ansehen Video
Weitere Informationen anfordern

Informationen zur funktionalen Sicherheit wie Failure Modes, Effects and Diagnostic Analysis (FMEDA), Sicherheitsanalyseberichte und Sicherheitshandbücher sind unter NDA verfügbar. Jetzt anfordern

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität
BQ76942 AKTIV Überwachungs- und Schutzbaustein für Akkupacks mit 3 bis 10 in Reihe geschalteten Zellen 3-S to 10-S battery monitor and balancer
BQ76952 AKTIV Batterieüberw.-/Schutzbaus. für Li-Ion-/Li-Polymer-/LiFePO4-Akkupacks, hohe Genauigk., 3 – 16 Zellen 3-S to 16-S battery monitor and balancer

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 15
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet BQ769142 3-Series to 14-Series High Accuracy Battery Monitor and Protector for Li-Ion, Li-Polymer, and LiFePO4 Battery Packs datasheet (Rev. B) PDF | HTML 24 Jan 2022
* User guide BQ769142 Technical Reference Manual (Rev. C) PDF | HTML 11 Mai 2022
Application note Why is short-circuit protection more challenging for high- side driver battery packs than low-side driver? PDF | HTML 23 Jan 2026
Application note BQ769x2 Frequently Asked Questions PDF | HTML 29 Mär 2024
Application note Design Considerations of Stacked BQ769x2 With High-Side N-MOSFET PDF | HTML 09 Feb 2023
Application note Using Low-Side FETs with the BQ769x2 Battery Monitor Family (Rev. A) PDF | HTML 24 Feb 2022
Application note Cell Balancing With BQ769x2 Battery Monitors (Rev. A) PDF | HTML 15 Feb 2022
Application note Multiple FETs with the BQ76952, BQ76942 Battery Monitors (Rev. A) 03 Dez 2021
Application note BQ769x2 Software Development Guide (Rev. B) PDF | HTML 26 Aug 2021
Application note BQ769x2 Calibration and OTP Programming Guide (Rev. A) PDF | HTML 06 Aug 2021
Application note Pin Equivalent Diagrams for the BQ76952, BQ76942, and BQ769142 06 Mai 2021
Technical article How to stack battery monitors for high-cell-count industrial applications PDF | HTML 11 Feb 2021
Technical article CURRENTly questioning the accuracy of your battery monitor? Improve battery safety PDF | HTML 28 Mai 2020
Technical article Improving voltage measurement accuracy in battery monitoring systems PDF | HTML 01 Apr 2020
Technical article Improving temperature measurement accuracy in battery monitoring systems PDF | HTML 20 Feb 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

BQ76952EVM — Evaluierungsmodul für Batterieüberwachungs- und Schutzbaustein für Lithium-Ionen-, Li-Polymer- und L

Das BQ76952EVM-Evaluierungsmodul (EVM) ist ein komplettes Evaluierungssystem für den integrierten Schaltkreis BQ76952 zur Überwachung von Li-Ion-Batterien (3 bis 16 Zellen). Das EVM besteht aus einem BQ76952-Schaltungsmodul, das zur einfachen Evaluierung der BQ76952-Überwachungsfunktion verwendet (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Anwendungssoftware und Frameworks

BQ769X2-THERMISTOR-COEFF-CALCULATOR — BQ76952/42 thermistor temperature optimizer - calculate the thermistors coefficients for T range

The BQ769x2 family of battery monitors can support multiple external thermistors. The device includes an internal pullup resistor to bias the thermistor during measurement. The internal pullup resistor has two options which can set the pullup to 18 kΩ or 180 kΩ. The 18-kΩ option (...)
Benutzerhandbuch: PDF | HTML
View Options
Anwendungssoftware und Frameworks

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – untested version downloads

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Download-Optionen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TQFP (PFB) 48 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos