DLP160AP
Digitales DLP®-Mikrospiegelarray (DMD), QnHD, 0,16 Zoll
DLP160AP
- Ultra-compact 0.16-inch (3.965-mm) diagonal micromirror array
- Displays 320 × 180 resolution
- 5.4 µm micromirror pitch
- 17° micromirror tilt (relative to flat surface)
- Side illumination for optimal efficiency and optical engine size
- Polarization independent aluminum micromirror surface
- 4-Bit SubLVDS input data bus
- Dedicated DLPC3420 display controller and DLPA2000 or DLPA2005 PMIC/LED driver for reliable operation
The DLP160AP digital micromirror device (DMD) is a digitally controlled micro-opto-electromechanical system (MOEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP160AP DMD displays a crisp and high-quality image or video. DLP160AP is part of the chipset comprising the DLP160AP DMD and DLPC3420 controller. This chipset is also supported by the DLPA2000 or DLPA2005 PMIC/LED driver. The compact physical size of the DLP160AP is well-suited for portable equipment where small form factor and low power is important. The compact DLP160AP DMD coupled with the controller and PMIC/LED driver provides a complete system solution that enables small form factor, low power, and high image quality displays.
Ähnliche Produkte, die für Sie interessant sein könnten
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
DLPDLCR160CPEVM — DLP160CP-Evaluierungsmodul für DLP® LightCrafter™ Display mit 0,16 nHD
Das DLP® LightCrafter™ Display 0.16-nHD Evaluierungsmodul (EVM) wurde entwickelt, um von einem Mikrocontroller (MCU) erzeugte Grafiken ohne Videoprozessor anzuzeigen. Dies eröffnet neue Möglichkeiten für erschwingliche formatunabhängige On-Demand-DLP-Displays für industrielle und persönliche (...)
DLP-PICO-FW-SEL — DLP® Pico™ Firmware-Auswahltool
DLP-PICO-CHIP-SEL — DLP® Pico™ chipset selection guide
Unterstützte Produkte und Hardware
Produkte
Pico-Produkte mit Array ≤ 0,47 Zoll
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
Unterstützte Produkte und Hardware
Produkte
Pico-Produkte mit Array ≥ 0,47 Zoll
Pico-Produkte mit Array ≤ 0,47 Zoll
UV-Produkte (< 400 nm)
Produkte für sichtbares Licht (420 bis 700 nm)
Produkte für Spektroskopie & optische Netzwerke
Außenbeleuchtungs- und Projektionsprodukte
Produkte für Nah-UV (400 bis 420 nm)
Display-Produkte
Nahinfrarot Produkte (>700 mm)
Mehrkanal-ICs (PMICs)
Unassigned processors
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
Support-Software
DLPR097 — Series 248 DMD Mounting and Electrical Interconnect Information
DLP-OMM-SEARCH — Suchtool für optische Module von DLP®-Produkten
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
Unterstützte Produkte und Hardware
Produkte
Produkte für Nah-UV (400 bis 420 nm)
Pico-Produkte mit Array ≥ 0,47 Zoll
Pico-Produkte mit Array ≤ 0,47 Zoll
UV-Produkte (< 400 nm)
Produkte für sichtbares Licht (420 bis 700 nm)
Produkte für Spektroskopie & optische Netzwerke
Außenbeleuchtungs- und Projektionsprodukte
Display-Produkte
Nahinfrarot Produkte (>700 mm)
Mehrkanal-ICs (PMICs)
Unassigned processors
Hardware-Entwicklung
Evaluierungsplatine
Entwicklungskit
Support-Software
DLPR095 — DLP160CP (0.16 nHD) Optical Reference Design
Unterstützte Produkte und Hardware
Produkte
Pico-Produkte mit Array ≤ 0,47 Zoll
DLPR096 — DLP160CP AR Glasses Eyepiece Optical Reference Design
Unterstützte Produkte und Hardware
Produkte
Pico-Produkte mit Array ≤ 0,47 Zoll
DLPR102 — DLP® Pico™ Products Ultra-Compact Optical Reference Design
Unterstützte Produkte und Hardware
Produkte
Pico-Produkte mit Array ≤ 0,47 Zoll
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| DLP-S248 (FQT) | 42 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.