Dreifach-Abwärtswandler + LDO-Power-Management-IC (PMIC)

LM10504 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
Ähnliche Funktionalität wie verglichener Baustein
LM10502 AKTIV Dual-Abwärtswandler, 2 MHz 1/1 A + Low-Dropout-Linearregler Application is for solid-state drives and supports ASIC and SOC designs for solid-state and flash drives.

Produktdetails

Vin (min) (V) 0 Vin (max) (V) 5.5 Vout (min) (V) 0.7 Vout (max) (V) 3.6 Iout (max) (A) 1.6 Features Comm control, Power sequencing Iq (typ) (mA) 0.1 Rating Catalog Operating temperature range (°C) 0 to 0 Switching frequency (typ) (kHz) 2000 Product type Processor and FPGA
Vin (min) (V) 0 Vin (max) (V) 5.5 Vout (min) (V) 0.7 Vout (max) (V) 3.6 Iout (max) (A) 1.6 Features Comm control, Power sequencing Iq (typ) (mA) 0.1 Rating Catalog Operating temperature range (°C) 0 to 0 Switching frequency (typ) (kHz) 2000 Product type Processor and FPGA
DSBGA (YFR) 34 9 mm² 3 x 3
  • Three High-Efficiency Programmable Buck Regulators
    • Integrated FETs With Low RDSON
    • Bucks Operate With Their Phases Shifted to Reduce the Input Current Ripple and Capacitor Size
    • Programmable Output Voltage Through the SPI Interface
    • Overvoltage and Undervoltage Lockout
    • Automatic Internal Soft Start With Power-On Reset
    • Current Overload and Thermal Shutdown Protection
    • PFM Mode for Low-Load, High-Efficiency Operation
  • Power-Down Data Protection Enhances Data Integrity
    • Bypass Mode Available on Bucks 1 and 2
  • Deep Sleep Mode to Save Power During Idle Times With DevSLP Function
  • Programmable Low-Dropout LDO 1.2 V to 3.1 V, up to 250 mA
  • SPI-Programmable Interrupt Comparator (2 V to 4 V)
  • Alternate Buck VOUTS Selectable Through VSELECT Logic Pins
  • Customizable Start-Up Sequencing for Varied Controllers
  • RESET Pin
  • Programmable Buck Regulators:
    • Buck 1: 1.1 V to 3.6 V at 1.6 A
    • Buck 2: 1.1 V to 3.6 V at 1 A
    • Buck 3: 0.7 V to 1.335 V at 1 A
  • ±3% Feedback Voltage Accuracy
  • Up to 95% Efficient Buck Regulators
  • 2-MHz Switching Frequency for Smaller Inductor Size
  • Three High-Efficiency Programmable Buck Regulators
    • Integrated FETs With Low RDSON
    • Bucks Operate With Their Phases Shifted to Reduce the Input Current Ripple and Capacitor Size
    • Programmable Output Voltage Through the SPI Interface
    • Overvoltage and Undervoltage Lockout
    • Automatic Internal Soft Start With Power-On Reset
    • Current Overload and Thermal Shutdown Protection
    • PFM Mode for Low-Load, High-Efficiency Operation
  • Power-Down Data Protection Enhances Data Integrity
    • Bypass Mode Available on Bucks 1 and 2
  • Deep Sleep Mode to Save Power During Idle Times With DevSLP Function
  • Programmable Low-Dropout LDO 1.2 V to 3.1 V, up to 250 mA
  • SPI-Programmable Interrupt Comparator (2 V to 4 V)
  • Alternate Buck VOUTS Selectable Through VSELECT Logic Pins
  • Customizable Start-Up Sequencing for Varied Controllers
  • RESET Pin
  • Programmable Buck Regulators:
    • Buck 1: 1.1 V to 3.6 V at 1.6 A
    • Buck 2: 1.1 V to 3.6 V at 1 A
    • Buck 3: 0.7 V to 1.335 V at 1 A
  • ±3% Feedback Voltage Accuracy
  • Up to 95% Efficient Buck Regulators
  • 2-MHz Switching Frequency for Smaller Inductor Size

The LM10504 is an advanced PMU containing three configurable, high-efficiency buck regulators for supplying variable voltages. The device is ideal for supporting ASIC and SOC designs for solid-state and flash drives.

The LM10504 operates cooperatively with ASIC to optimize the supply voltage for low-power conditions and power saving modes through the SPI interface. It also supports a 250-mA LDO and a programmable interrupt comparator.

The LM10504 is an advanced PMU containing three configurable, high-efficiency buck regulators for supplying variable voltages. The device is ideal for supporting ASIC and SOC designs for solid-state and flash drives.

The LM10504 operates cooperatively with ASIC to optimize the supply voltage for low-power conditions and power saving modes through the SPI interface. It also supports a 250-mA LDO and a programmable interrupt comparator.

Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet LM10504 Triple Buck and LDO Power Management Unit datasheet (Rev. F) PDF | HTML 11 Okt 2016

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort