Home Energiemanagement Mehrkanal-ICs (PMICs)

Dreifach-Abwärtswandler + LDO-Power-Management-IC (PMIC)

LM10506 wird nicht für neue Designs empfohlen
Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Für neue Designs sollte ein alternatives Produkt in Erwägung gezogen werden.
Ähnliche Funktionalität wie verglichener Baustein
LM10502 AKTIV Dual-Abwärtswandler, 2 MHz 1/1 A + Low-Dropout-Linearregler Application is for solid-state drives and supports ASIC and SOC designs for solid-state and flash drives.

Produktdetails

Product type Processor and FPGA Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0.7 Vout (max) (V) 3.6 Iout (max) (A) 1.3 Features Comm control, Power sequencing Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (mA) 0.1 Switching frequency (typ) (kHz) 2000
Product type Processor and FPGA Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0.7 Vout (max) (V) 3.6 Iout (max) (A) 1.3 Features Comm control, Power sequencing Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (mA) 0.1 Switching frequency (typ) (kHz) 2000
DSBGA (YFR) 34 9 mm² 3 x 3
  • Three Highly Efficient Programmable Buck Regulators
    • Buck Regulator Outputs:
      • Buck 1: 1.1 V to 3.6 V; 1.3 A
      • Buck 2: 1.1 V to 3.6 V; 400 mA
      • Buck 3: 0.7 V to 1.335 V; 600 mA
    • ±3% Feedback Voltage Accuracy
    • Up to 95% Efficient Buck Regulators
    • 2MHz Switching Frequency for Smaller Inductor Size
    • Integrated FETs with Low RDSON
    • Bucks Operate With Their Phases Shifted to Reduce the
      Input Current Ripple and Capacitor Size
    • Programmable Output Voltage via the SPI™ Interface
    • Overvoltage and Undervoltage Lockout
    • Automatic Internal Soft Start With Power-On Reset
    • Current Overload and Thermal Shutdown Protection
    • Bypass Mode Available on
    • PFM Mode for Low-Load, High-Efficiency Operation
  • Low-Dropout LDO 3.2 V, 100 mA
  • SPI-Programmable Interrupt Comparator (2 V to 4 V)
  • Alternate Buck VOUT Selectable via H/L Logic
    Pins
  • RESET, STANDBY Pins
  • Three Highly Efficient Programmable Buck Regulators
    • Buck Regulator Outputs:
      • Buck 1: 1.1 V to 3.6 V; 1.3 A
      • Buck 2: 1.1 V to 3.6 V; 400 mA
      • Buck 3: 0.7 V to 1.335 V; 600 mA
    • ±3% Feedback Voltage Accuracy
    • Up to 95% Efficient Buck Regulators
    • 2MHz Switching Frequency for Smaller Inductor Size
    • Integrated FETs with Low RDSON
    • Bucks Operate With Their Phases Shifted to Reduce the
      Input Current Ripple and Capacitor Size
    • Programmable Output Voltage via the SPI™ Interface
    • Overvoltage and Undervoltage Lockout
    • Automatic Internal Soft Start With Power-On Reset
    • Current Overload and Thermal Shutdown Protection
    • Bypass Mode Available on
    • PFM Mode for Low-Load, High-Efficiency Operation
  • Low-Dropout LDO 3.2 V, 100 mA
  • SPI-Programmable Interrupt Comparator (2 V to 4 V)
  • Alternate Buck VOUT Selectable via H/L Logic
    Pins
  • RESET, STANDBY Pins

The LM10506 is an advanced PMU containing three configurable, high-efficiency buck regulators for supplying variable voltages. The device is ideal for supporting ASIC and SOC designs for Solid-State and Flash drives.

The LM10506 operates cooperatively with ASIC to optimize the supply voltage for low-power conditions and Power Saving modes via the SPI interface. It also supports a 100-mA LDO and a programmable Interrupt Comparator.

The LM10506 is an advanced PMU containing three configurable, high-efficiency buck regulators for supplying variable voltages. The device is ideal for supporting ASIC and SOC designs for Solid-State and Flash drives.

The LM10506 operates cooperatively with ASIC to optimize the supply voltage for low-power conditions and Power Saving modes via the SPI interface. It also supports a 100-mA LDO and a programmable Interrupt Comparator.

Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet LM10506 Triple Buck + LDO Power Management Unit datasheet (Rev. F) PDF | HTML 07 Aug 2014

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort