Startseite Energiemanagement LED-Treiber LED-Beleuchtungstreiber

LM2759

AKTIV

LED-Treiber mit geschaltetem Kondensator für 1A und I2C-kompatibler Schnittstelle

Produktdetails

Input voltage type DC/DC Topology Charge pump, current mode Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (max) (V) 5.5 Vout (min) (V) 3 Iout (max) (A) 1 Iq (typ) (mA) 3.4 Features I2C control Operating temperature range (°C) -30 to 85 Dimming method Analog, PWM Number of channels 1 Rating Catalog
Input voltage type DC/DC Topology Charge pump, current mode Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (max) (V) 5.5 Vout (min) (V) 3 Iout (max) (A) 1 Iq (typ) (mA) 3.4 Features I2C control Operating temperature range (°C) -30 to 85 Dimming method Analog, PWM Number of channels 1 Rating Catalog
WSON (DQB) 12 9 mm² 3 x 3
  • Up to 1A Output Current
  • Solution Area < 22 mm2
  • No Inductor Required
  • 90% Peak Efficiency
  • Adaptive 1x, 1.5x and 2x Gains for Maximum Efficiency
  • Load Disconnect in Shutdown
  • Accurate Input Current Control During Gain Transitions
  • Flash Time-Out
  • TX Input Pin Ensures Synchronization with RF Power Amplifier Pulse
  • Torch, Flash, and Indicator Modes
  • External Flash Enable via Strobe Input Pin
  • Strobe Input Disable via I2C
  • Programmable Flash Pulse Duration, and Torch and Flash Currents via I2C-Compatible Interface
  • 1MHz Constant Frequency Operation
  • Low Profile 12–Pin WSON (3mm x 3mm x 0.8mm)

All trademarks are the property of their respective owners.

  • Up to 1A Output Current
  • Solution Area < 22 mm2
  • No Inductor Required
  • 90% Peak Efficiency
  • Adaptive 1x, 1.5x and 2x Gains for Maximum Efficiency
  • Load Disconnect in Shutdown
  • Accurate Input Current Control During Gain Transitions
  • Flash Time-Out
  • TX Input Pin Ensures Synchronization with RF Power Amplifier Pulse
  • Torch, Flash, and Indicator Modes
  • External Flash Enable via Strobe Input Pin
  • Strobe Input Disable via I2C
  • Programmable Flash Pulse Duration, and Torch and Flash Currents via I2C-Compatible Interface
  • 1MHz Constant Frequency Operation
  • Low Profile 12–Pin WSON (3mm x 3mm x 0.8mm)

All trademarks are the property of their respective owners.

LM2759 is an integrated low-noise, high-current switched capacitor DC/DC converter with a regulated current source. The device requires only four small ceramic capacitors making the total solution area less than 22 mm2 and the height less than 1 mm. The LM2759 is capable of driving loads up to 1A from a single-cell Li-Ion battery. Maximum efficiency is achieved over the input voltage range by actively selecting the proper gain based on the LED forward voltage and current requirements.

The LED current can be programmed up to 1A via an I2C-compatible interface, along with eight selectable Flash Time-Out durations. One high-current Flash LED can be driven either in a high-power Flash mode or a low-power Torch mode. The Strobe pin allows the flash to be toggled via a Flash enable signal from a camera module. The TX input pin limits the Flash LED current to the Torch current level during a RF PA pulse, to reduce high loads on the battery. Internal soft-start circuitry limits the amount of inrush current during start-up.

LM2759 is offered in a small 12-pin thermally enhanced WSON package.

LM2759 is an integrated low-noise, high-current switched capacitor DC/DC converter with a regulated current source. The device requires only four small ceramic capacitors making the total solution area less than 22 mm2 and the height less than 1 mm. The LM2759 is capable of driving loads up to 1A from a single-cell Li-Ion battery. Maximum efficiency is achieved over the input voltage range by actively selecting the proper gain based on the LED forward voltage and current requirements.

The LED current can be programmed up to 1A via an I2C-compatible interface, along with eight selectable Flash Time-Out durations. One high-current Flash LED can be driven either in a high-power Flash mode or a low-power Torch mode. The Strobe pin allows the flash to be toggled via a Flash enable signal from a camera module. The TX input pin limits the Flash LED current to the Torch current level during a RF PA pulse, to reduce high loads on the battery. Internal soft-start circuitry limits the amount of inrush current during start-up.

LM2759 is offered in a small 12-pin thermally enhanced WSON package.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
LM36010 AKTIV LM36010 – LED-Blitztreiber mit synchroner Verstärkung LM36010 and LM36011 are single channel flash LED driver

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet LM2759 1A Switched Capacitor Flash LED Driver with I 2 C Compatible Interface datasheet (Rev. D) 03 Mai 2013
White paper Common LED Functions and LED Driver Design Considerations 21 Sep 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WSON (DQB) 12 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos