Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)

11-kHz-Spannungsverdoppler mit geschaltetem Kondensator

LM2767 wird demnächst aus dem Programm genommen
Bitte ziehen Sie eine dieser Alternativen in Erwägung:
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
LM2765 AKTIV 50-kHz-Spannungsverdoppler mit geschaltetem Kondensator LM2765 has EN pin and higher switching frequency
TPS60150 AKTIV Ladungspumpe in Gehäuse 2x2 SON, 140 mA, 5 V Higher output current up to 150 mA

Produktdetails

Rating Catalog Operating temperature range (°C) -40 to 85 Type Charge pump Iout (max) (A) 0.015 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 4 Switching frequency (max) (kHz) 25 Vout (min) (V) 3.6 Vout (max) (V) 11 Iq (typ) (µA) 40
Rating Catalog Operating temperature range (°C) -40 to 85 Type Charge pump Iout (max) (A) 0.015 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 4 Switching frequency (max) (kHz) 25 Vout (min) (V) 3.6 Vout (max) (V) 11 Iq (typ) (µA) 40
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Doubles input supply voltage
  • SOT-23 5-pin package
  • 20-Ω typical output impedance
  • 96% typical conversion efficiency at 15 mA
  • Doubles input supply voltage
  • SOT-23 5-pin package
  • 20-Ω typical output impedance
  • 96% typical conversion efficiency at 15 mA

The LM2767 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of 1.8 V to 5.5 V. Two low-cost capacitors and a diode are used in this circuit to provide at least 15 mA of output current.

The LM2767 operates at 11-kHz switching frequency to avoid audio voice-band interference. With an operating current of only 40 µA (operating efficiency greater than 90% with most loads), the LM2767 provides ideal performance for battery-powered systems. The device is manufactured in a 5-pin SOT-23 package.

The LM2767 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of 1.8 V to 5.5 V. Two low-cost capacitors and a diode are used in this circuit to provide at least 15 mA of output current.

The LM2767 operates at 11-kHz switching frequency to avoid audio voice-band interference. With an operating current of only 40 µA (operating efficiency greater than 90% with most loads), the LM2767 provides ideal performance for battery-powered systems. The device is manufactured in a 5-pin SOT-23 package.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet LM2767 Switched Capacitor Voltage Converter datasheet (Rev. E) PDF | HTML 26 Jan 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins Herunterladen
SOT-23 (DBV) 5 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos