LM2941QML-SP

AKTIV

Radiation-hardened, QML-V, 6V to 26V input, 1A adjustable output linear regulator

Jetzt bestellen

Datenblatt

document-pdfAcrobat LM2941QML 1A Low Dropout Adjustable Regulator datasheet (Rev. B) (Englisch)

LM2941QML-SP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Space

Vin (max) (V)

26

Vin (min) (V)

6

Iout (max) (A)

1

Output options

Adjustable Output, Fixed Output

Vout (max) (V)

20

Vout (min) (V)

5

Fixed output options (V)

0, 1.2

Noise (µVrms)

600

PSRR at 100 KHz (dB)

67

Iq (typ) (mA)

10

Features

Enable

Thermal resistance θJA (°C/W)

41

Load capacitance (min) (µF)

22

Regulated outputs (#)

1

Accuracy (%)

5

Dropout voltage (Vdo) (typ) (mV)

500

Operating temperature range (°C)

-55 to 125

Radiation, SEL (MeV·cm2/mg)

Bipolar

Radiation, TID (typ) (krad)

100

Rating

Space

Vin (max) (V)

26

Vin (min) (V)

6

Iout (max) (A)

1

Output options

Adjustable Output, Fixed Output

Vout (max) (V)

20

Vout (min) (V)

5

Fixed output options (V)

0, 1.2

Noise (µVrms)

600

PSRR at 100 KHz (dB)

67

Iq (typ) (mA)

10

Features

Enable

Thermal resistance θJA (°C/W)

41

Load capacitance (min) (µF)

22

Regulated outputs (#)

1

Accuracy (%)

5

Dropout voltage (Vdo) (typ) (mV)

500

Operating temperature range (°C)

-55 to 125

Radiation, SEL (MeV·cm2/mg)

Bipolar

Radiation, TID (typ) (krad)

100

CFP (NAC)

16

62.9285 mm² (— mm × — mm)

DIESALE (Y)

—

See data sheet

Available with Radiation Ensure
- ELDRS Free 100 krad(Si)
Output Voltage Adjustable from 5V to 20V
Dropout Voltage Typically 0.5V at I_O = 1A
Output Current in Excess of 1A
Trimmed Reference Voltage
Reverse Battery Protection
Internal Short Circuit Current Limit
Mirror Image Insertion Protection
TTL, CMOS Compatible ON/OFF Switch

All trademarks are the property of their respective owners.

Available with Radiation Ensure
- ELDRS Free 100 krad(Si)
Output Voltage Adjustable from 5V to 20V
Dropout Voltage Typically 0.5V at I_O = 1A
Output Current in Excess of 1A
Trimmed Reference Voltage
Reverse Battery Protection
Internal Short Circuit Current Limit
Mirror Image Insertion Protection
TTL, CMOS Compatible ON/OFF Switch

All trademarks are the property of their respective owners.

The LM2941 positive voltage regulator features the ability to source 1A of output current with a typical dropout voltage of 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground pin current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30mA. Higher quiescent currents only exist when the regulator is in the dropout mode (V_I − V_O ≤ 3V).

Originally designed for vehicular applications, the LM2941 and all regulated circuitry are protected from reverse battery installations or two-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. Familiar regulator features such as short circuit and thermal overload protection are also provided.

The LM2941 positive voltage regulator features the ability to source 1A of output current with a typical dropout voltage of 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground pin current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30mA. Higher quiescent currents only exist when the regulator is in the dropout mode (V_I − V_O ≤ 3V).

Originally designed for vehicular applications, the LM2941 and all regulated circuitry are protected from reverse battery installations or two-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. Familiar regulator features such as short circuit and thermal overload protection are also provided.

filter

Andere Linear- und Low-Dropout-Regler (LDO) suchen

Herunterladen Video mit Transkript ansehen Video

Eingeschränkte Designunterstützung von TI verfügbar

Bestehende Projekte, in denen dieses Produkt zum Einsatz kommt, haben eine eingeschränkte Designunterstützung von TI. Falls verfügbar, finden Sie auf dieser Seite entsprechende Sicherheitshinweise, Tools und Software. Bestehende Designs, in denen dieses Produkt zum Einsatz kommt, haben eine eingeschränkte Designunterstützung von TI. Fordern Sie in den TI E2E-Supportforen™ eingeschränkte Designunterstützung an.

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LM2941QML 1A Low Dropout Adjustable Regulator datasheet (Rev. B)		22.04.2013
*	Strahlungs- und Zuverlässigkeitsbericht	LM2941QML-SP Neutron Displacement Damage (NDD) Characterization Report		29.10.2021
*	Strahlungs- und Zuverlässigkeitsbericht	LM2941WGRLQMLV ELDRS Report		11.05.2012
*	SMD	LM2941QML-SP SMD 5962-91667		21.06.2016
	Auswahlhilfe	TI Space Products (Rev. L)		27.03.2026
	Anwendungshinweis	Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A)	PDF \| HTML	05.11.2025
	Application brief	DLA Approved Optimizations for QML Products (Rev. C)	PDF \| HTML	17.06.2025
	Anwendungshinweis	Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B)	PDF \| HTML	10.06.2025
	Weitere Dokumente	TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B)		20.02.2025
	Anwendungshinweis	QML flow, its importance, and obtaining lot information (Rev. C)		30.08.2023
	Anwendungshinweis	Single-Event Effects Confidence Interval Calculations (Rev. A)	PDF \| HTML	19.10.2022
	Anwendungshinweis	DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer		21.08.2020
	E-book	Radiation Handbook for Electronics (Rev. A)		21.05.2019
	Anwendungshinweis	Use of an LDO as a Load Switch for Space Applications		01.08.2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
CFP (NAC)	16	Ultra Librarian
DIESALE (Y)	—	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

LM2941QML-SP

Radiation-hardened, QML-V, 6V to 26V input, 1A adjustable output linear regulator

LM2941QML-SP

Produktdetails

Eingeschränkte Designunterstützung von TI verfügbar

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie der verglichene Baustein.

Technische Dokumentation

Design und Entwicklung

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos