SN105125

AKTIV

Einstellbarer Low-Dropout-Spannungsregler, 150 mA, mit Power Good

Produktdetails

Output options Fixed Output Iout (max) (A) 0.15 Vin (max) (V) 5.2 Vin (min) (V) 3 Vout (max) (V) 1.2 Vout (min) (V) 1.2 Fixed output options (V) 1.2 Iq (typ) (mA) 0.15 Thermal resistance θJA (°C/W) 235 Rating Catalog Regulated outputs (#) 1 Features Power good Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 1000 Operating temperature range (°C) 0 to 70
Output options Fixed Output Iout (max) (A) 0.15 Vin (max) (V) 5.2 Vin (min) (V) 3 Vout (max) (V) 1.2 Vout (min) (V) 1.2 Fixed output options (V) 1.2 Iq (typ) (mA) 0.15 Thermal resistance θJA (°C/W) 235 Rating Catalog Regulated outputs (#) 1 Features Power good Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 1000 Operating temperature range (°C) 0 to 70
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Low Dropout Voltage Regulator, 1.2-V
  • 150-mA Load Current Capability
  • Power Okay (POK) Function
  • Load Independent, Low Ground Current,150-uA
  • Current Limiting
  • Thermal Shutdown
  • Low Sleep State Current (Off Mode)
  • Fast Transient Response
  • Low Variation Due to Load and Line Regulation
  • Output Stable With Low ESR Capacitors
  • TTL Logic Controlled Enable Input
  • applications
    • Processor Powerup Sequencing
    • Palmtop Computers, Laptops, and Notebooks

  • Low Dropout Voltage Regulator, 1.2-V
  • 150-mA Load Current Capability
  • Power Okay (POK) Function
  • Load Independent, Low Ground Current,150-uA
  • Current Limiting
  • Thermal Shutdown
  • Low Sleep State Current (Off Mode)
  • Fast Transient Response
  • Low Variation Due to Load and Line Regulation
  • Output Stable With Low ESR Capacitors
  • TTL Logic Controlled Enable Input
  • applications
    • Processor Powerup Sequencing
    • Palmtop Computers, Laptops, and Notebooks

The SN105125 is a low dropout voltage regulator with an output tolerance of ±2% over the operating range. The device is optimized for low noise applications and has a low quiescent current (enable <0.8 V). The device has a low dropout voltage at full load (150 mA). The power okay function monitors the output voltage and indicates when an error occurs in the system (active low). In the event of an output fault such as overcurrent, thermal shutdown, or dropout, the power okay output is pulled low (open drain).

The SN105125 has a fast transient response recovery capability in the event of load transition from heavy load to light load. The device also minimizes overshoot during this condition. During power down, the output capacitor and load are de-energized through the internal active shutdown clamp, which is turned on when the device is disabled.

The SN105125 requires a small output capacitor for stability with low ESR. An input capacitor is not required unless the bulk ac capacitor is placed away from the device or the power supply is a battery. In this situation, a 1-uF capacitor is recommended for the application. Low ESR ceramic capacitors may be used with the device to reduce board space in power applications, a key concern in hand-held wireless devices.

The SN105125 is a low dropout voltage regulator with an output tolerance of ±2% over the operating range. The device is optimized for low noise applications and has a low quiescent current (enable <0.8 V). The device has a low dropout voltage at full load (150 mA). The power okay function monitors the output voltage and indicates when an error occurs in the system (active low). In the event of an output fault such as overcurrent, thermal shutdown, or dropout, the power okay output is pulled low (open drain).

The SN105125 has a fast transient response recovery capability in the event of load transition from heavy load to light load. The device also minimizes overshoot during this condition. During power down, the output capacitor and load are de-energized through the internal active shutdown clamp, which is turned on when the device is disabled.

The SN105125 requires a small output capacitor for stability with low ESR. An input capacitor is not required unless the bulk ac capacitor is placed away from the device or the power supply is a battery. In this situation, a 1-uF capacitor is recommended for the application. Low ESR ceramic capacitors may be used with the device to reduce board space in power applications, a key concern in hand-held wireless devices.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
TPS745 AKTIV Hochpräziser, einstellbarer Spannungsregler mit extrem niedrigem Dropout und Power Good, 500 mA, nie Higher current with better dropout and accuracy
Ähnliche Funktionalität wie verglichener Baustein
LP3988 AKTIV Low-Dropout-Spannungsregler, 150 mA, mit Power-Good- und Aktivierungsfunktion LP3988 is a newer 150mA LDO with PG

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet 150-mA Low Dropout Regulator with POK datasheet 01 Feb 2002
Application note LDO Noise Demystified (Rev. B) PDF | HTML 18 Aug 2020
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 09 Aug 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins Herunterladen
SOT-23 (DBV) 5 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos