SN74ALVCH162260

AKTIV

12-Bit- bis 24-Bit-Typ D-Latch mit Multiplexer und Tri-State-Ausgängen

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN74ALVCH162260 datasheet (Rev. I) (Englisch)

SN74ALVCH162260

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

12

Technology family

ALVC

Input type

Standard CMOS

Output type

3-State

Clock frequency (max) (MHz)

150

IOL (max) (mA)

12

IOH (max) (mA)

-12

Supply current (max) (µA)

40

Features

Balanced outputs, Bus-hold, Damping resistors, Flow-through pinout, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Number of channels

12

Technology family

ALVC

Input type

Standard CMOS

Output type

3-State

Clock frequency (max) (MHz)

150

IOL (max) (mA)

12

IOH (max) (mA)

-12

Supply current (max) (µA)

40

Features

Balanced outputs, Bus-hold, Damping resistors, Flow-through pinout, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)

Operating temperature range (°C)

-40 to 85

Rating

Catalog

TSSOP (DGG)

56

113.4 mm² (14 mm × 8.1 mm)

SSOP (DL)

56

190.647 mm² (18.42 mm × 10.35 mm)

Member of the Texas Instruments Widebus™ Family
EPIC™ (Enhanced-Performance Implanted CMOS) Submicron Process
B-Port Outputs Have Equivalent 26- Series Resistors, So No External Resistors Are Required
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include Thin-Shrink Small-Outline (DGG) and Plastic Shrink Small-Outline (DL) Packages

NOTE: For tape and reel order entry: The DGGR package is abbreviated to GR.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.

Member of the Texas Instruments Widebus™ Family
EPIC™ (Enhanced-Performance Implanted CMOS) Submicron Process
B-Port Outputs Have Equivalent 26- Series Resistors, So No External Resistors Are Required
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include Thin-Shrink Small-Outline (DGG) and Plastic Shrink Small-Outline (DL) Packages

NOTE: For tape and reel order entry: The DGGR package is abbreviated to GR.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.

This 12-bit to 24-bit multiplexed D-type latch is designed for 1.65-V to 3.6-V_CC operation.

The SN74ALVCH162260 is used in applications in which two separate data paths must be multiplexed onto, or demultiplexed from, a single data path. Typical applications include multiplexing and/or demultiplexing address and data information in microprocessor or bus-interface applications. This device also is useful in memory-interleaving applications.

Three 12-bit I/O ports (A1-A12, 1B1-1B12, and 2B1-2B12) are available for address and/or data transfer. The output-enable (OE1B\, OE2B\, and OEA\) inputs control the bus transceiver functions. The OE1B\ and OE2B\ control signals also allow bank control in the A-to-B direction.

Address and/or data information can be stored using the internal storage latches. The latch-enable (LE1B, LE2B, LEA1B, and LEA2B) inputs are used to control data storage. When the latch-enable input is high, the latch is transparent. When the latch-enable input goes low, the data present at the inputs is latched and remains latched until the latch-enable input is returned high.

The B outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74ALVCH162260 is characterized for operation from –40°C to 85°C.