Home Sensoren Temperatursensoren Digitale Temperatursensoren
Home
Sensoren
Temperatursensoren
Digitale Temperatursensoren

TMP100-Q1

AKTIV

Temperatursensor mit I2C und SMBus-Schnittstelle mit Alarmfunktion

Jetzt bestellen
Datenblatt

TMP100-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features One-shot conversion Supply current (max) (µA) 75 Temp resolution (max) (bps) 12 Remote channels (#) 0 Addresses 8 Rating Automotive TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features One-shot conversion Supply current (max) (µA) 75 Temp resolution (max) (bps) 12 Remote channels (#) 0 Addresses 8 Rating Automotive TI functional safety category Functional Safety-Capable
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • AEC-Q100 qualified with the following results:
    • Temperature grade 1: −55°C to +125°C operating temperature range
    • HBM ESD component classification level 2
    • CDM ESD component classification level C5
  • Functional Safety-Capable
  • Digital output: SMBus™, two-wire, and I2C interface compatibility
  • Resolution: 9 to 12 bits, user-selectable
  • Accuracy:
    • ±1°C (typical) from –55°C to 125°C
    • ±2°C (maximum) from –55°C to 125°C
  • Low quiescent current: 45-µA, 0.1-µA standby
  • Wide supply range: 2.7 V to 5.5 V
  • TMP100-Q1 features two address pins
  • TMP101-Q1 features one address pin and an ALERT pin
  • 6-pin SOT-23 package
  • AEC-Q100 qualified with the following results:
    • Temperature grade 1: −55°C to +125°C operating temperature range
    • HBM ESD component classification level 2
    • CDM ESD component classification level C5
  • Functional Safety-Capable
  • Digital output: SMBus™, two-wire, and I2C interface compatibility
  • Resolution: 9 to 12 bits, user-selectable
  • Accuracy:
    • ±1°C (typical) from –55°C to 125°C
    • ±2°C (maximum) from –55°C to 125°C
  • Low quiescent current: 45-µA, 0.1-µA standby
  • Wide supply range: 2.7 V to 5.5 V
  • TMP100-Q1 features two address pins
  • TMP101-Q1 features one address pin and an ALERT pin
  • 6-pin SOT-23 package

The TMP100-Q1 and TMP101-Q1 devices are digital temperature sensors designed for negative temperature coefficient (NTC) and positive temperature coefficient (PTC) thermistor replacement. The devices offer a typical accuracy of ±1°C without requiring calibration or external component signal conditioning. Device temperature sensors are highly linear and do not require complex calculations or look-up tables to derive the temperature. The on-chip, 12-bit ADC offers resolutions down to 0.0625°C. The devices are available in 6-Pin SOT-23 packages.

The TMP100-Q1 and TMP101-Q1 devices feature SMBus, Two-Wire, and I2C interface compatibility. The TMP100-Q1 device allows up to eight devices on one bus. The TMP101-Q1 device offers an SMBus Alert function with up to three devices per bus.

The TMP100-Q1 and TMP101-Q1 devices are designed for extended temperature measurement in a variety of communication, computer, consumer, environmental, industrial, and instrumentation applications.

The TMP100-Q1 and TMP101-Q1 devices are specified for operation over a temperature range of −55°C to 125°C.

The TMP100-Q1 and TMP101-Q1 devices are digital temperature sensors designed for negative temperature coefficient (NTC) and positive temperature coefficient (PTC) thermistor replacement. The devices offer a typical accuracy of ±1°C without requiring calibration or external component signal conditioning. Device temperature sensors are highly linear and do not require complex calculations or look-up tables to derive the temperature. The on-chip, 12-bit ADC offers resolutions down to 0.0625°C. The devices are available in 6-Pin SOT-23 packages.

The TMP100-Q1 and TMP101-Q1 devices feature SMBus, Two-Wire, and I2C interface compatibility. The TMP100-Q1 device allows up to eight devices on one bus. The TMP101-Q1 device offers an SMBus Alert function with up to three devices per bus.

The TMP100-Q1 and TMP101-Q1 devices are designed for extended temperature measurement in a variety of communication, computer, consumer, environmental, industrial, and instrumentation applications.

The TMP100-Q1 and TMP101-Q1 devices are specified for operation over a temperature range of −55°C to 125°C.
filter Andere Digitale Temperatursensoren suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
TMP101-Q1 AKTIV Digitaler Temperatursensor mit Automobilzulassung, ±2 °C, mit I2C/SMBus-Schnittstelle und Alarm Pin-to-pin option with support for 3 addresses

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TMP100-Q1 and TMP101-Q1 Temperature Sensor With I2C and SMBus Interface with Alert Function in SOT-23 Package datasheet (Rev. B) PDF | HTML 17 Jun 2022
Functional safety information TMP100-Q1 Functional Safety FIT Rate and FMD PDF | HTML 17 Jun 2022
Technical article How to maximize powertrain efficiency and reliability with high-accuracy temperatu PDF | HTML 10 Mai 2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-23 (DBV) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos