Produktdetails

Setpoint type Resistor Programmable Setpoint value (°C) -40 to 125 Operating temperature range (°C) -40 to 125 Accuracy over temp range (max) (°C) 2 Sensor gain (mV/°C) 10 Output type Open drain Supply voltage (min) (V) 1.8 Supply voltage (max) (V) 18 Supply current (typ) (µA) 110 Number of comparator channels 1 Features Built-in hysteresis Rating Automotive Interface type Analog output, Switch
Setpoint type Resistor Programmable Setpoint value (°C) -40 to 125 Operating temperature range (°C) -40 to 125 Accuracy over temp range (max) (°C) 2 Sensor gain (mV/°C) 10 Output type Open drain Supply voltage (min) (V) 1.8 Supply voltage (max) (V) 18 Supply current (typ) (µA) 110 Number of comparator channels 1 Features Built-in hysteresis Rating Automotive Interface type Analog output, Switch
SOT-SC70 (DCK) 6 4.2 mm² 2 x 2.1
  • ACCURACY: ±1°C (typical at +25°C)
  • PROGRAMMABLE TRIP POINT
  • PROGRAMMABLE HYSTERESIS: 5°C/10°C
  • OPEN-DRAIN OUTPUTS
  • LOW-POWER: 110µA (max)
  • WIDE VOLTAGE RANGE: +1.8V to +18V
  • OPERATION: –40°C to +150°C
  • ANALOG OUT: 10mV/°C
  • SC70-6 PACKAGE
  • ACCURACY: ±1°C (typical at +25°C)
  • PROGRAMMABLE TRIP POINT
  • PROGRAMMABLE HYSTERESIS: 5°C/10°C
  • OPEN-DRAIN OUTPUTS
  • LOW-POWER: 110µA (max)
  • WIDE VOLTAGE RANGE: +1.8V to +18V
  • OPERATION: –40°C to +150°C
  • ANALOG OUT: 10mV/°C
  • SC70-6 PACKAGE

The TMP300B-Q1 is a low-power, resistor-programmable, digital output temperature switch. It allows a threshold point to be set by adding an external resistor. Two levels of hysteresis are available. The TMP300B-Q1 has a VTEMP analog output that can be used as a testing point or in temperature-compensation loops.

With a supply voltage as low as 1.8V and low current consumption, the TMP300B-Q1 is ideal for power-sensitive systems.

Available in two micropackages that have proven thermal characteristics, this part gives a complete and simple solution for users who need simple and reliable thermal management.

The TMP300B-Q1 is a low-power, resistor-programmable, digital output temperature switch. It allows a threshold point to be set by adding an external resistor. Two levels of hysteresis are available. The TMP300B-Q1 has a VTEMP analog output that can be used as a testing point or in temperature-compensation loops.

With a supply voltage as low as 1.8V and low current consumption, the TMP300B-Q1 is ideal for power-sensitive systems.

Available in two micropackages that have proven thermal characteristics, this part gives a complete and simple solution for users who need simple and reliable thermal management.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet 1,8V Resistor-Programmable Temperature Switch and Analog out Temperature Sensor datasheet 21 Dez 2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins Herunterladen
SOT-SC70 (DCK) 6 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos