Home Energiemanagement DC/DC-Schaltregler DC/DC-Controller
Home
Energiemanagement
DC/DC-Schaltregler
DC/DC-Controller

TPS53632

AKTIV

3-2-1-phasiger treiberloser Abwärts-Controller für D-CAP+ mit I2C-Steuerung

Jetzt bestellen
Datenblatt

TPS53632

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Topology Multiphase Iout (max) (A) 90 Vin (max) (V) 24 Vin (min) (V) 2.5 Vout (max) (V) 1.52 Vout (min) (V) 0.5 Control mode D-CAP+ Features Adjustable current limit, Enable, Light Load Efficiency, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, Synchronous Rectification Duty cycle (max) (%) 50 Iq (typ) (A) 0.006 Number of phases 3 Operating temperature range (°C) -10 to 105
Rating Catalog Topology Multiphase Iout (max) (A) 90 Vin (max) (V) 24 Vin (min) (V) 2.5 Vout (max) (V) 1.52 Vout (min) (V) 0.5 Control mode D-CAP+ Features Adjustable current limit, Enable, Light Load Efficiency, Phase Interleaving, Power good, Pre-Bias Start-Up, Remote Sense, Synchronous Rectification Duty cycle (max) (%) 50 Iq (typ) (A) 0.006 Number of phases 3 Operating temperature range (°C) -10 to 105
VQFN (RSM) 32 16 mm² (4 mm × 4 mm)
  • Selectable Phase Count: (3, 2, or 1)
  • I2C Interface for VID Control and Telemetry with Eight Device Addresses
  • D-CAP+ Control for Fast Transient Response
  • Dynamic Phase Add and Drop Operation
  • Switching Frequency: 300 kHz to 1 MHz
  • Digital Current Monitor
  • 7-Bit, DAC Output Range: 0.50 V to 1.52 V
  • Optimized Efficiency at Light and Heavy Loads
  • Accurate, Adjustable Voltage Positioning or Zero Slope Load-Line
  • Patented AutoBalance Phase Balancing
  • Selectable, 8-Level Current Limit
  • 2.5-V to 24-V Conversion Voltage Range
  • Default Boot Voltage: 1.00 V
  • Small, 4-mm x 4-mm, 32-Pin, VQFN PowerPAD Package
  • Selectable Phase Count: (3, 2, or 1)
  • I2C Interface for VID Control and Telemetry with Eight Device Addresses
  • D-CAP+ Control for Fast Transient Response
  • Dynamic Phase Add and Drop Operation
  • Switching Frequency: 300 kHz to 1 MHz
  • Digital Current Monitor
  • 7-Bit, DAC Output Range: 0.50 V to 1.52 V
  • Optimized Efficiency at Light and Heavy Loads
  • Accurate, Adjustable Voltage Positioning or Zero Slope Load-Line
  • Patented AutoBalance Phase Balancing
  • Selectable, 8-Level Current Limit
  • 2.5-V to 24-V Conversion Voltage Range
  • Default Boot Voltage: 1.00 V
  • Small, 4-mm x 4-mm, 32-Pin, VQFN PowerPAD Package

The TPS53632 device is a driverless step-down controller with serial control. Advanced features such as D-CAP+ architecture provide fast transient response, lowest output capacitance and high efficiency. The TPS53632 device supports the standard I2C Rev 3.0 interface for dynamic control of the output voltage and current monitor telemetry. It also has dynamic phase add and drop control and enters single-phase, discontinuous-current-mode operation to maximize light-load efficiency.

Other features include adjustable control of VCORE slew rate and voltage positioning. The TPS51604 device driver is designed specifically for this generation of controllers. In addition, the TPS53632 device can be used along with the TI power stage devices (driver MOSFETs). The TPS53632 device is packaged in a space saving, thermally enhanced, 32-pin VQFN package and is rated

The TPS53632 device is a driverless step-down controller with serial control. Advanced features such as D-CAP+ architecture provide fast transient response, lowest output capacitance and high efficiency. The TPS53632 device supports the standard I2C Rev 3.0 interface for dynamic control of the output voltage and current monitor telemetry. It also has dynamic phase add and drop control and enters single-phase, discontinuous-current-mode operation to maximize light-load efficiency.

Other features include adjustable control of VCORE slew rate and voltage positioning. The TPS51604 device driver is designed specifically for this generation of controllers. In addition, the TPS53632 device can be used along with the TI power stage devices (driver MOSFETs). The TPS53632 device is packaged in a space saving, thermally enhanced, 32-pin VQFN package and is rated
filter Andere DC/DC-Controller suchen
Herunterladen Video mit Transkript ansehen Video

Anfragen zu Design-Support-Tools richten Sie bitte an VR@list.ti.com.

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS53632 3-2-1 Phase D-CAP+™ Step-Down Driverless Controller for Low-Voltage Applications with I2C Interface Control datasheet PDF | HTML 08.08.2014
Anwendungshinweis Multiphase Buck Design from Start to Finish, Part 1 (Rev. B) 07.04.2021

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RSM) 32 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos