TPS5430-Q1

Name: TPS5430-Q1
Brand: TI
SKU: TPS5430-Q1
Price: 1.996 USD

AKTIV

Abwärtswandler (Buck) für die Automobilindustrie, 5,5 bis 36 V, 500 KHz Festfrequenz, 3 A

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS5430-Q1 Automotive, 3A, Wide-Input-Range Step-Down Converter datasheet (Rev. E) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein

LMR33630AP-Q1

AKTIV

Synchroner Abwärtsspannungswandler, 3,8 bis 36 V, 3 A, für die Automobilindustrie Smaller footprint, higher efficiency, lower IQ and lower EMI.

TPS5430-Q1

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Iout (max) (A)

3

Vin (min) (V)

5.5

Vin (max) (V)

36

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

500

Switching frequency (max) (kHz)

500

Features

Enable, Over Current Protection, Soft Start Fixed

Control mode

Voltage mode

Vout (min) (V)

1.22

Vout (max) (V)

31

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.003

Iout (max) (A)

3

Vin (min) (V)

5.5

Vin (max) (V)

36

Topology

Buck

Type

Converter

Switching frequency (min) (kHz)

500

Switching frequency (max) (kHz)

500

Features

Enable, Over Current Protection, Soft Start Fixed

Control mode

Voltage mode

Vout (min) (V)

1.22

Vout (max) (V)

31

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.003

HSOIC (DDA)

8

29.4 mm² 4.9 x 6

Qualified for automotive applications
Wide input voltage range: 5.5V to 36V
Up to 3A continuous (4A peak) output current
High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feed forward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD™ integrated circuit package
Create a custom regulator design using the TPS5430-Q1 with WEBENCH Power Designer

Qualified for automotive applications
Wide input voltage range: 5.5V to 36V
Up to 3A continuous (4A peak) output current
High efficiency up to 95% enabled by 100mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feed forward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD™ integrated circuit package
Create a custom regulator design using the TPS5430-Q1 with WEBENCH Power Designer

The TPS5430-Q1 is a high-output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), and thermal shutdown. To reduce design complexity and external component count, the TPS5430-Q1 feedback loop is internally compensated. The TPS5430-Q1 regulates a wide variety of power sources including 24V buses.

The TPS5430-Q1 device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the WEBENCH software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

The TPS5430-Q1 is a high-output current PWM converter that integrates a low-resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage lockout (UVLO) circuit to prevent start-up until the input voltage reaches 5.5V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the enable (ENA) pin, shutdown supply current is reduced to 15µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection (OVP), and thermal shutdown. To reduce design complexity and external component count, the TPS5430-Q1 feedback loop is internally compensated. The TPS5430-Q1 regulates a wide variety of power sources including 24V buses.

The TPS5430-Q1 device is available in a thermally enhanced, easy-to-use 8-pin SOIC PowerPAD integrated circuit package. TI provides evaluation modules and the WEBENCH software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

open-in-new

Andere AC/DC & DC/DC converters (integrated FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	TPS5430-Q1 Automotive, 3A, Wide-Input-Range Step-Down Converter datasheet (Rev. E)	PDF \| HTML	19 Jan 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS5430EVM-173 — TPS5430 35 V-Eingang, 5 V-Ausgang, 3 A – Evaluierungsmodul

The TPS5430EVM-173 evaluation module allows the designer to evaluate the TPS5430 SWIFT DC/DC converter and is designed with external components to operate over a wide input voltage range. The input voltage range of this module is 9.0 V to 36 V and the output voltage is pre-set to (...)

Benutzerhandbuch: PDF | HTML