TPS8802
Analog-Frontend für Rauchmelder in Wohngebäuden
TPS8802
- Photo Chamber AFE
- Dual 8-bit programmable current LED drivers
- Temperature compensation of LED current
- Ultra-low offset op-amp for photodiodes
- Programmable and bypassable gain stage
- Carbon Monoxide Sensor AFE
- Ultra-low offset gain stage
- Programmable gain and reference
- Horn Driver
- Self-resonant driver for three-terminal piezos
- PWM support for voice on two-terminal piezos
- Power Management
- Programmable LDO for external microcontroller
- Boost converter for horn, interconnect
- Interconnection bus for multi-alarm communication
- Ultra-low power consumption
- I2C serial interface
- Programmable battery test load
The TPS8802 integrates all of the regulators, amplifiers, and drivers required for a dual-wave photoelectric smoke alarm and carbon monoxide (CO) detection system. Its high flexibility is ideal for smoke alarm systems where precision and power consumption are critical.
The wide input voltage range combined with low standby power consumption and power-saving features support 10-year battery life operation from a single lithium primary battery. The TPS8802 also supports battery backup smoke alarms, seamlessly remaining powered when the mains supply drops or if the battery is disconnected.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | TPS8802 Smoke Alarm AFE datasheet (Rev. C) | PDF | HTML | 09 Aug 2021 |
Application note | Dual-Ray Smoke Detector with the TPS8802 and MSPM0 MCUs | PDF | HTML | 22 Aug 2023 | |
EVM User's guide | Using the TPS8802EVM (Rev. B) | 19 Jul 2022 | ||
Application note | Achieving 10-Year Battery Life with Smoke Alarm TPS8802 | PDF | HTML | 04 Okt 2021 | |
Application note | Optimizing SNR in Smoke Alarm Photodiode Front Ends with TPS8802 and TPS8804 | PDF | HTML | 04 Okt 2021 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
TPS8802EVM — Evaluierungsmodul für TPS8802 kommerzielle photoelektrische und Rauch-/CO-Melde
SLVC813 — TPS8802 Smoke Detection Code for Energia
Unterstützte Produkte und Hardware
SLVRBG9 — TPS8802 Power Calculation Spreadsheet
Unterstützte Produkte und Hardware
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
HTSSOP (DCP) | 38 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.