Startseite Energiemanagement LED-Treiber Kfz-LED-Treiber

TPS929121-Q1

AKTIV

12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle

Produktdetails

Number of channels 12 Topology Current Source Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Iout (max) (A) 0.075 Iq (typ) (mA) 10 Features Enable/Shutdown, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Weak Supply Diagnostics, PWM Dimming, Reference Resistor Open or Short Detection, Thermal Error Flag, Thermal Prewarning and Shutdown, Thermal shutdown
Number of channels 12 Topology Current Source Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Iout (max) (A) 0.075 Iq (typ) (mA) 10 Features Enable/Shutdown, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Weak Supply Diagnostics, PWM Dimming, Reference Resistor Open or Short Detection, Thermal Error Flag, Thermal Prewarning and Shutdown, Thermal shutdown
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • AEC-Q100-qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • 12-channel precision high-side current output:
    • Supply voltage 4.5 V to 40 V
    • Up to 75-mA channel current set by resistor
    • 2-bit global, 6-bit independent current setting
    • High current accuracy < ±5% at 5 mA to 75 mA
    • High current accuracy < ±10% at 1 mA
    • Low voltage drop 500 mV at 50 mA
    • 12-bit independent PWM dimming
    • Programmable PWM frequency up to 20 kHz
    • Linear and exponential dimming method
  • FlexWire control interface
    • Up to 1-MHz clock frequency
    • Maximum 16 devices on one FlexWire bus
    • Up to 8-bytes data transaction in one frame
    • 5-V LDO output to supply CAN transceiver
  • Diagnostic and protection:
    • Programmable fail-safe state
    • LED open-circuit detection
    • LED short-circuit detection
    • Single-LED short-circuit diagnostic
    • Programmable low-supply detection
    • Open-drain ERR for fault indication
    • Watchdog and CRC for FlexWire interface
    • 8-Bit ADC for pin voltage measurement
    • Overtemperature protection
  • AEC-Q100-qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • 12-channel precision high-side current output:
    • Supply voltage 4.5 V to 40 V
    • Up to 75-mA channel current set by resistor
    • 2-bit global, 6-bit independent current setting
    • High current accuracy < ±5% at 5 mA to 75 mA
    • High current accuracy < ±10% at 1 mA
    • Low voltage drop 500 mV at 50 mA
    • 12-bit independent PWM dimming
    • Programmable PWM frequency up to 20 kHz
    • Linear and exponential dimming method
  • FlexWire control interface
    • Up to 1-MHz clock frequency
    • Maximum 16 devices on one FlexWire bus
    • Up to 8-bytes data transaction in one frame
    • 5-V LDO output to supply CAN transceiver
  • Diagnostic and protection:
    • Programmable fail-safe state
    • LED open-circuit detection
    • LED short-circuit detection
    • Single-LED short-circuit diagnostic
    • Programmable low-supply detection
    • Open-drain ERR for fault indication
    • Watchdog and CRC for FlexWire interface
    • 8-Bit ADC for pin voltage measurement
    • Overtemperature protection

With increasing demand for animation in automotive lighting, LEDs must be controlled independently. Therefore, LED drivers with digital interfaces are essential to effectively drive pixel-controlled lighting applications. In exterior lighting, multiple lamp functions are typically located on different PCB boards with off-board wires connected to each other. It is difficult for a traditional single-ended interface to meet the strict EMC requirements. By using an industrial-standard CAN physical layer, the UART-based FlexWire interface of the TPS929121-Q1 easily accomplishes long distance off-board communication without impacting EMC.

The TPS929121-Q1 is a 12-channel, 40-V high-side LED driver that controls the 8-bit output current and 12-bit PWM duty cycles. The device meets multiple regulation requirements with LED open-circuit, short-to-ground, and single LED short-circuit diagnostics. A configurable watchdog also automatically sets fail-safe states when the MCU connection is lost, and, with programmable EEPROM, TPS929121-Q1 can flexibly be set for different application scenarios.

With increasing demand for animation in automotive lighting, LEDs must be controlled independently. Therefore, LED drivers with digital interfaces are essential to effectively drive pixel-controlled lighting applications. In exterior lighting, multiple lamp functions are typically located on different PCB boards with off-board wires connected to each other. It is difficult for a traditional single-ended interface to meet the strict EMC requirements. By using an industrial-standard CAN physical layer, the UART-based FlexWire interface of the TPS929121-Q1 easily accomplishes long distance off-board communication without impacting EMC.

The TPS929121-Q1 is a 12-channel, 40-V high-side LED driver that controls the 8-bit output current and 12-bit PWM duty cycles. The device meets multiple regulation requirements with LED open-circuit, short-to-ground, and single LED short-circuit diagnostics. A configurable watchdog also automatically sets fail-safe states when the MCU connection is lost, and, with programmable EEPROM, TPS929121-Q1 can flexibly be set for different application scenarios.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Gleiche Funktionalität, gleiche Pinbelegung wie verglichener Baustein
TPS929120-Q1 AKTIV 12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle Low-supply detection threshold decreased to 5V

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet TPS929121-Q1 12-Channel Automotive 40-V High-Side LED Driver With FlexWire datasheet (Rev. A) PDF | HTML 05 Feb 2021
User guide TPS929xxx-Q1 Sample Code User's Guide PDF | HTML 10 Apr 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS929120EVM — TPS929120-Q1-Evaluierungsmodul für 12-kanaligen LED-Treiber für die Automobilindustrie

Das Evaluierungsmodul (EVM) TPS929120-Q1 unterstützt Entwickler bei der Evaluierung des Betriebs und der Leistung von TPS929120-Q1, einem 12-kanaligen 40-V-Highside-LED-Treiber mit FlexLED™-Schnittstelle zur individuellen Steuerung von Ausgangsstrom und PWM-Dutycycle für Beleuchtungsanwendungen im (...)
Benutzerhandbuch: PDF
Anwendungssoftware und Frameworks

TPS92912XQ1-SW-F5529 Reference code for TPS92912x-Q1 based on MSP430F5529 (MSP-EXP430F5529LP)

This reference code showcases the ability of the MSP430F5529 device to communicate with the TPS929120-Q1 and TPS929121-Q1 LED driver. The code configures the MCU using UART to drive 12 LEDs which is available on the TPS929120EVM.
lock = Nur mit Exportgenehmigung (1 Minute)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Kfz-LED-Treiber
TPS929120-Q1 12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle TPS929121-Q1 12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle
Download-Optionen
GUI für Evaluierungsmodul (EVM)

TPS929120EVM-GUI-SW TPS929120EVM GUI

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Kfz-LED-Treiber
TPS929121-Q1 12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle
Hardware-Entwicklung
Evaluierungsplatine
TPS929120EVM TPS929120-Q1-Evaluierungsmodul für 12-kanaligen LED-Treiber für die Automobilindustrie
Berechnungstool

SLVRBF8 TPS92912x-Q1 EEPROM Configuration Tool

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Kfz-LED-Treiber
TPS929120-Q1 12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle TPS929121-Q1 12-kanaliger 40-V-High-Side-LED-Treiber für Fahrzeuganwendungen mit FlexWire-Schnittstelle
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins Herunterladen
HTSSOP (PWP) 24 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos