Home HF & Mikrowellen HF-Verstärker HF-Volldifferenzverstärker (FDAs)
Home
HF & Mikrowellen
HF-Verstärker
HF-Volldifferenzverstärker (FDAs)
NEU

TRF0108-SP

AKTIV

Sub-MHz to 12 GHz 3-dB BW, radiation hardened QMLP class, differential to single-ended DAC buffer

Jetzt bestellen
Datenblatt

TRF0108-SP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 12000 Gain (typ) (dB) 15.9 Noise figure (typ) (dB) 10.9 OIP3 (typ) (dBm) 26.5 P1dB (typ) (dBm) 11 Frequency of harmonic distortion measurement (GHz) 4 3rd harmonic (dBc) -43 OIP2 (typ) (dBm) 34 2nd harmonic (dBc) -39 Supply voltage (V) 5 Current consumption (mA) 170 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 75 Radiation, TID (typ) (rad) 100000
Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 12000 Gain (typ) (dB) 15.9 Noise figure (typ) (dB) 10.9 OIP3 (typ) (dBm) 26.5 P1dB (typ) (dBm) 11 Frequency of harmonic distortion measurement (GHz) 4 3rd harmonic (dBc) -43 OIP2 (typ) (dBm) 34 2nd harmonic (dBc) -39 Supply voltage (V) 5 Current consumption (mA) 170 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 75 Radiation, TID (typ) (rad) 100000
WQFN-FCRLF (RPV) 12 4 mm² 2 x 2
  • Standard microcircuit drawing (SMD), 5962-25201
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 100krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 100krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 75MeV-cm2/mg
      • Single event transient (SET) characterized to LET of 75MeV‑cm2/mg
  • Space-grade QML-P
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA
  • Standard microcircuit drawing (SMD), 5962-25201
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 100krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 100krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 75MeV-cm2/mg
      • Single event transient (SET) characterized to LET of 75MeV‑cm2/mg
  • Space-grade QML-P
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Differential to single-ended (D2S) RF amplifier
  • Near-DC to 12GHz
  • Gain: 15.2dB at 2GHz
  • OP1dB: 11.4dBm (2GHz), 9.4dBm (6GHz)
  • OIP3: 27dBm (2GHz), 28.5dBm (6GHz)
  • NF: 10.9dB (2GHz), 12.1dB (6GHz)
  • HD2 (1GHz): –57dBc at 2dBm
  • HD3 (1GHz): –57dBc at 2dBm
  • Additive (residual) phase noise (1GHz):
    • –154.6dBc/Hz at 10kHz offset
  • Gain and phase imbalance: ±0.6dB and ±3º
  • Differential input matched to 100Ω, Single-ended output matched to 50Ω
  • Power-down feature
  • 5V supply
  • Active current: 170mA

The TRF0108-SP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SP or AFE7950-SP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.

The TRF0108-SP is a very high performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion when driven by a digital-to-analog converter (DAC) such as the high-performance DAC39RF10-SP or AFE7950-SP. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm x 2mm package.

The TRF0108-SP operates on a single 5V supply and consumes about 170mA of active current. A power-down feature is also available for power savings.
filter Andere HF-Volldifferenzverstärker (FDAs) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TRF0108-SP Radiation-Hardness-Assured (RHA), DC to 12GHz Bandwidth, Differential-to-Single-Ended RF Amplifier datasheet PDF | HTML 10 Jul 2026
* Radiation & reliability report TRF0108-SP Total Ionizing Dose (TID) Report (Rev. A) 30 Mär 2026
* Radiation & reliability report TRF0108-SP Single-Event Effects (SEE) Radiation Report 27 Mär 2026
Selection guide TI Space Products (Rev. L) 27 Mär 2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

TRF0108-SP S-Parameter Model

SLOM538.ZIP (8 KB) - S-Parameter Model
Herunterladen
Berechnungstool

RF-CASCADE-CALC-TOOL — TI RF Cascade Calculator

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Herunterladen
Zertifizierung

TRF0108SP-EVM-DOC-CERT — TRF0108SP-EVM EU Declaration of Conformity (DoC)

TRF0108SP-EVM EU Declaration of Conformity (DoC)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN-FCRLF (RPV) 12 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos