TS3USBA225

Name: TS3USBA225
Brand: TI
SKU: TS3USBA225
Price: 0.435 USD

AKTIV

DP3T USB 2.0 HIGHSPEED (480Mbps) UND AUDIO-SCHALTER

Jetzt bestellen

Datenblatt

document-pdfAcrobat TS3USBA225 USB 2.0 High-Speed (480 Mbps) and Audio Switches with Negative Signal Capability and 1.8-V Logic Compatibility and Power-Down Mode datasheet (Rev. C) (Englisch) PDF | HTML

TS3USBA225

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Protocols

Analog Audio, UART, USB 2.0

Configuration

3:1

Number of channels

2

USB speed (Mbps)

480

Bandwidth (MHz)

1900

Supply voltage (max) (V)

5

Supply voltage (min) (V)

2.7

Ron (typ) (mΩ)

6500

Input/output voltage (min) (V)

-1.8

Input/output voltage (max) (V)

4.3

Supply current (typ) (µA)

25

ESD HBM (typ) (kV)

2

Operating temperature range (°C)

-40 to 85

COFF (typ) (pF)

1

CON (typ) (pF)

3

Off isolation (typ) (dB)

-35

Ron (max) (mΩ)

7500

Turnoff time (disable) (max) (ns)

60

Turnon time (enable) (max) (ns)

20

Rating

Catalog

Protocols

Analog Audio, UART, USB 2.0

Configuration

3:1

Number of channels

2

USB speed (Mbps)

480

Bandwidth (MHz)

1900

Supply voltage (max) (V)

5

Supply voltage (min) (V)

2.7

Ron (typ) (mΩ)

6500

Input/output voltage (min) (V)

-1.8

Input/output voltage (max) (V)

4.3

Supply current (typ) (µA)

25

ESD HBM (typ) (kV)

2

Operating temperature range (°C)

-40 to 85

COFF (typ) (pF)

1

CON (typ) (pF)

3

Off isolation (typ) (dB)

-35

Ron (max) (mΩ)

7500

Turnoff time (disable) (max) (ns)

60

Turnon time (enable) (max) (ns)

20

Rating

Catalog

UQFN (RUT)

12

3.4 mm² 2 x 1.7

2.7-V to 5.0-V Operating Power Supply (VCC)
MHL/High-Speed USB (480 Mbps) Switch:
- V I/O Accepts Signals up to 4.5 V (Independent of VCC)
- 6.5 Ω r_ON Typical
- 3 pF C_ON Typical
- 1.9 GHz Bandwidth (–3 dB)
Audio Switch:
- 2.5 Ω r_ON Typical
- Negative Rail Capability down to –1.8 V
- Low THD: < 0.05%
- Internal Shunt Resistors for Click-and-Pop Reduction
1.8-V Compatible Control Input (SEL1 and SEL2) Threshold
Minimized Current Consumption (~5 µA) in Power-Down Mode
Power-Off Protection: All I/O Pins are High-Z when V_CC= 0 V
12-Pin QFN Package (2 mm × 1.7 mm, 0.4 mm Pitch)
ESD Performance Tested per JESD 22
- 2000 V Human-Body Model
  (A114-B, Class II)
- 1000 V Charged-Device Model (C101)

2.7-V to 5.0-V Operating Power Supply (VCC)
MHL/High-Speed USB (480 Mbps) Switch:
- V I/O Accepts Signals up to 4.5 V (Independent of VCC)
- 6.5 Ω r_ON Typical
- 3 pF C_ON Typical
- 1.9 GHz Bandwidth (–3 dB)
Audio Switch:
- 2.5 Ω r_ON Typical
- Negative Rail Capability down to –1.8 V
- Low THD: < 0.05%
- Internal Shunt Resistors for Click-and-Pop Reduction
1.8-V Compatible Control Input (SEL1 and SEL2) Threshold
Minimized Current Consumption (~5 µA) in Power-Down Mode
Power-Off Protection: All I/O Pins are High-Z when V_CC= 0 V
12-Pin QFN Package (2 mm × 1.7 mm, 0.4 mm Pitch)
ESD Performance Tested per JESD 22
- 2000 V Human-Body Model
  (A114-B, Class II)
- 1000 V Charged-Device Model (C101)

The TS3USBA225 is a 2-channel single-pole triple-throw (SP3T) multiplexer that supports USB 2.0 High-Speed (480 Mbps) signals in all 3 differential channels. The first two high-speed differential channels also support Mobile High Definition Link (MHL) signaling with resolution and video frame rates up to 720p, 60 fps and 1080i, 30 fps. The remaining differential channel can also be used as an audio switch that is designed to allow analog audio signals to swing negatively. This configuration allows the system designer to use a common connector for audio and USB 2.0 or MHL data.

The TS3USBA225 has a V_CC range of 2.7 V to 5.0 V with the capability to pass true-ground audio signals down to –1.8 V. The device also supports a power-down mode that can be enabled when both SEL1 and SEL2 controls are low to minimize current consumption when no signal is transmitting. The TS3USBA225 also features internal shunt resistors on the audio path to reduce clicks and pops that may be heard when the audio switches are selected.

The TS3USBA225 is a 2-channel single-pole triple-throw (SP3T) multiplexer that supports USB 2.0 High-Speed (480 Mbps) signals in all 3 differential channels. The first two high-speed differential channels also support Mobile High Definition Link (MHL) signaling with resolution and video frame rates up to 720p, 60 fps and 1080i, 30 fps. The remaining differential channel can also be used as an audio switch that is designed to allow analog audio signals to swing negatively. This configuration allows the system designer to use a common connector for audio and USB 2.0 or MHL data.

The TS3USBA225 has a V_CC range of 2.7 V to 5.0 V with the capability to pass true-ground audio signals down to –1.8 V. The device also supports a power-down mode that can be enabled when both SEL1 and SEL2 controls are low to minimize current consumption when no signal is transmitting. The TS3USBA225 also features internal shunt resistors on the audio path to reduce clicks and pops that may be heard when the audio switches are selected.

filter

Andere Protokoll- & Busschalter & -multiplexer suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

	Typ	Titel		Datum
*	Data sheet	TS3USBA225 USB 2.0 High-Speed (480 Mbps) and Audio Switches with Negative Signal Capability and 1.8-V Logic Compatibility and Power-Down Mode datasheet (Rev. C)	PDF \| HTML	27 Aug 2015
	Application note	High-Speed Interface Layout Guidelines (Rev. J)	PDF \| HTML	24 Feb 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.