UC1825

AKTIV

Highspeed-PWM-Controller

Jetzt bestellen

Datenblatt

document-pdfAcrobat High Speed PWM Controller datasheet (Rev. A) (Englisch)

UC1825

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Vin (max) (V)

20

Operating temperature range (°C)

-55 to 125

Control mode

Current

Topology

Boost, Flyback, Forward, Full bridge, Half bridge, Push pull

Rating

Military

Features

Error amplifier, Multi-topology, Soft start, Synchronization pin

Duty cycle (max) (%)

80

Vin (max) (V)

20

Operating temperature range (°C)

-55 to 125

Control mode

Current

Topology

Boost, Flyback, Forward, Full bridge, Half bridge, Push pull

Rating

Military

Features

Error amplifier, Multi-topology, Soft start, Synchronization pin

Duty cycle (max) (%)

80

CDIP (J)

16

135.3552 mm² 19.56 x 6.92

CFP (W)

16

69.319 mm² 10.3 x 6.73

LCCC (FK)

20

79.0321 mm² 8.89 x 8.89

Compatible with Voltage or Current Mode Topologies
Practical Operation Switching Frequencies to 1MHz
50ns Propagation Delay to Output
High Current Dual Totem Pole Outputs (1.5A Peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic with Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start / Max. Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1mA)

Compatible with Voltage or Current Mode Topologies
Practical Operation Switching Frequencies to 1MHz
50ns Propagation Delay to Output
High Current Dual Totem Pole Outputs (1.5A Peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic with Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start / Max. Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1mA)

The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

filter

Andere AC/DC- und DC/DC-Controller (externer FET) suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 6

	Typ	Titel		Datum
*	Data sheet	High Speed PWM Controller datasheet (Rev. A)		24 Feb 2004
*	SMD	UC1825 SMD 5962-87681		21 Jun 2016
	White paper	Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A)	PDF \| HTML	30 Apr 2024
	Technical article	Power Tips: Calculate an R-C snubber in seven steps	PDF \| HTML	05 Mai 2016
	Application note	U-110 1.5 Mhz Current Mode IC Controlled 50-Watt Power Supply		05 Sep 1999
	Application note	U-111, Practical Considerations in Current Mode Power Supplies		05 Sep 1999

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.