Home Energiemanagement AC/DC-Schaltregler AC/DC-Controller

UCC28070A

AKTIV

Zweiphasiger Interleaved-CCM-PFC-Controller mit erweitertem Frequenzbereich (10 kHz bis 300 kHz)

Produktdetails

Topology Boost, PFC controller Control mode CCM Features > 750 W applications, Average current mode, Continuous Control Mode, Interleaved, Overvoltage protection, Programable Switching Frequency Duty cycle (max) (%) 99
Topology Boost, PFC controller Control mode CCM Features > 750 W applications, Average current mode, Continuous Control Mode, Interleaved, Overvoltage protection, Programable Switching Frequency Duty cycle (max) (%) 99
TSSOP (PW) 20 41.6 mm² (6.5 mm × 6.4 mm)
  • Interleaved average current-mode PWM control with inherent current matching
  • Advanced current-synthesizer current sensing for superior efficiency
  • Synchronization capability to external clock
  • Highly-linear multiplier output with internal quantized voltage feed-forward for near-unity PF
  • Enhanced transient response through slew-rate correction of voltage amplifier output current
  • Extended-range programmable frequency
    • UCC28070A: 10kHz to 300kHz
    • UCC28070: 30kHz to 300kHz
  • Programmable maximum duty-cycle clamp
  • Programmable frequency-dithering rate and magnitude (up to 30kHz) for EMI reduction
  • Programmable soft-start
  • Programmable peak current limiting
  • External PFC-disable interface
  • Protections: bias-supply UVLO, output overvoltage, open‑loop detection, open-circuit detection on VSENSE and VINAC, and PFC-enable monitoring
  • Interleaved average current-mode PWM control with inherent current matching
  • Advanced current-synthesizer current sensing for superior efficiency
  • Synchronization capability to external clock
  • Highly-linear multiplier output with internal quantized voltage feed-forward for near-unity PF
  • Enhanced transient response through slew-rate correction of voltage amplifier output current
  • Extended-range programmable frequency
    • UCC28070A: 10kHz to 300kHz
    • UCC28070: 30kHz to 300kHz
  • Programmable maximum duty-cycle clamp
  • Programmable frequency-dithering rate and magnitude (up to 30kHz) for EMI reduction
  • Programmable soft-start
  • Programmable peak current limiting
  • External PFC-disable interface
  • Protections: bias-supply UVLO, output overvoltage, open‑loop detection, open-circuit detection on VSENSE and VINAC, and PFC-enable monitoring

The UCC28070A and UCC28070 are advanced power factor correction (PFC) controllers that each integrate two pulse-width modulators (PWMs) operating interleaved by 180° in CCM boost-mode. Both devices can switch at frequencies up to 300kHz, while the UCC28070A device is capable of operating down to 10kHz for IGBT power-switch based PFC converters in high-power applications. The minimum operating frequency of the UCC28070 device is limited to 30kHz.

The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted-EMI filtering becomes easier and less expensive. All the other features and benefits of the UCC28070A and UCC28070 devices are the same.

Both devices feature multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. In addition, frequency dithering, clock synchronization, and slew-rate enhancement further expand the potential for performance improvements. Also, protection features include output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

The UCC28070A and UCC28070 are advanced power factor correction (PFC) controllers that each integrate two pulse-width modulators (PWMs) operating interleaved by 180° in CCM boost-mode. Both devices can switch at frequencies up to 300kHz, while the UCC28070A device is capable of operating down to 10kHz for IGBT power-switch based PFC converters in high-power applications. The minimum operating frequency of the UCC28070 device is limited to 30kHz.

The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted-EMI filtering becomes easier and less expensive. All the other features and benefits of the UCC28070A and UCC28070 devices are the same.

Both devices feature multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. In addition, frequency dithering, clock synchronization, and slew-rate enhancement further expand the potential for performance improvements. Also, protection features include output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt UCC28070 and UCC28070A Extended Frequency Range (10kHz to 300kHz), Interleaving Continuous Conduction Mode PFC Controller datasheet (Rev. C) PDF | HTML 28.07.2025
Product overview PFC Controller Step-by-Step Selection Guide PDF | HTML 28.02.2023
Anwendungshinweis UCC2806x PCB Layout Guideline for PFC 29.04.2019
Whitepaper Advancing Power Supply Solutions Through the Promise of GaN 24.02.2015
Weitere Dokumente Design Review of a Full-Featured 350-W Offline Power Converter 29.10.2013
Anwendungshinweis UCC28070 Implement Bridgeless PFC Pre-Regulator Design 18.06.2009
Benutzerhandbuch UCC28070, 300-W Interleaved PFC Pre-Regulator (Rev. B) 12.05.2009

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

UCC28070EVM — UCC28070-Evaluierungsmodul

Das Evaluierungsmodul UCC28070 ist ein zweiphasiger, verschachtelter PFC-Vorregler mit 300 W, der durchschnittliche Strommodus-Steuerungsverfahren anwendet, um einen nahezu einheitlichen Leistungsfaktor zu erzielen. Der Vorregler wurde für den Betrieb über einen universellen AC-Leitungseingang (...)
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

UCC28070 PSpice Average Model

SLUM098.ZIP (210 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

UCC28070 PSpice Start-up Simulation Using Average Model

SLUM097.ZIP (76 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

SLUC114 — UCC28070 Excel Applications Design Tool

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TSSOP (PW) 20 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videoreihe

Alle Videos anzeigen

Videos