Startseite Energiemanagement Sequenzer
Startseite
Energiemanagement
Sequenzer
NEU

UCD91160

AKTIV

Stromversorgungssequenzer und Systemmanager für PMBus mit 16 Schienen

Jetzt bestellen
Datenblatt

UCD91160

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of supplies monitored 16 Number of sequenced outputs 16 Rating Catalog Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 2.85 Iq (typ) (mA) 10 Operating temperature range (°C) -40 to 125
Number of supplies monitored 16 Number of sequenced outputs 16 Rating Catalog Supply voltage (max) (V) 3.6 Supply voltage (min) (V) 2.85 Iq (typ) (mA) 10 Operating temperature range (°C) -40 to 125
LQFP (PM) 64 144 mm² 12 x 12
  • Sequence and monitor up to 16 analog rails
  • PWM margining on up to 8 rails
  • Cascade up to 4 devices to sequence up to 64 rails
  • Active trim function allows user to trim output voltage
  • Monitor and respond to OV, UV, time-out, and GPI-triggered faults
  • Flexible sequencing dependencies, delay times, Boolean logic, and GPIO configurations
  • Rail status dependent sequencing, delay times, and LGPO pins for complex sequencing applications
  • Four rail profiles for adaptive voltage identification (AVID) voltage regulator
  • Nonvolatile fault event logging with RTC and timestamping
    • Single-event fault log (100 entries)
    • Black box fault log saves fault information and status of all rails - for the first fault and the last fault before a power down event
  • Continue monitoring rails during configuration activities to maximize up-time
  • Programmable watchdog timer and system reset
  • GPI Controlled Rail Groups
  • SEU mitigation and ECC (single-error correct + double-error detect)
  • PMBus™ 1.2 compliant
  • PMBus security profile Level 0 with custom commands to enable features in security profile Level 2
  • Sequence and monitor up to 16 analog rails
  • PWM margining on up to 8 rails
  • Cascade up to 4 devices to sequence up to 64 rails
  • Active trim function allows user to trim output voltage
  • Monitor and respond to OV, UV, time-out, and GPI-triggered faults
  • Flexible sequencing dependencies, delay times, Boolean logic, and GPIO configurations
  • Rail status dependent sequencing, delay times, and LGPO pins for complex sequencing applications
  • Four rail profiles for adaptive voltage identification (AVID) voltage regulator
  • Nonvolatile fault event logging with RTC and timestamping
    • Single-event fault log (100 entries)
    • Black box fault log saves fault information and status of all rails - for the first fault and the last fault before a power down event
  • Continue monitoring rails during configuration activities to maximize up-time
  • Programmable watchdog timer and system reset
  • GPI Controlled Rail Groups
  • SEU mitigation and ECC (single-error correct + double-error detect)
  • PMBus™ 1.2 compliant
  • PMBus security profile Level 0 with custom commands to enable features in security profile Level 2

The UCD91160 device is a 16-rail PMBus controlled power sequencer in a 64-pin QFP package.

Dedicated pins (MONx) monitor up to 16 voltage rails in either analog or digital modes. 16 rail enable (ENx) pins allow regulators to be sequenced. 8 margining (MARx) pins can be used to push regulators to high or low limits (margins) for testing, or actively trim outputs for enhanced accuracy. The output state of 16 logical GPO (LGPOx) pins can be controlled by the state of GPIs, rail status, and other LGPOs.

Nonvolatile event logging preserves fault events after power dropout. The Black Box Fault Log preserves the fault information and the status of all rails. The black box fault log records the first and last fault event before a power down. The cascading feature offers convenient ways to manage up to 64 voltage rails.

The Sequencer Studio™ software is an intuitive PC-based graphic user interface (GUI) that can configure, store, and monitor all system operating parameters.

The UCD91160 device is a 16-rail PMBus controlled power sequencer in a 64-pin QFP package.

Dedicated pins (MONx) monitor up to 16 voltage rails in either analog or digital modes. 16 rail enable (ENx) pins allow regulators to be sequenced. 8 margining (MARx) pins can be used to push regulators to high or low limits (margins) for testing, or actively trim outputs for enhanced accuracy. The output state of 16 logical GPO (LGPOx) pins can be controlled by the state of GPIs, rail status, and other LGPOs.

Nonvolatile event logging preserves fault events after power dropout. The Black Box Fault Log preserves the fault information and the status of all rails. The black box fault log records the first and last fault event before a power down. The cascading feature offers convenient ways to manage up to 64 voltage rails.

The Sequencer Studio™ software is an intuitive PC-based graphic user interface (GUI) that can configure, store, and monitor all system operating parameters.
filter Andere Sequenzer suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet UCD91160 16-Rail PMBus™ Power Sequencer and System Manager datasheet PDF | HTML 23 Dez 2025
User guide UCD91xxx Sequencer and System Health Controller PMBus™ Command Reference PDF | HTML 10 Dez 2025
Application note Design Voltage Margining Circuit for UCD91xxx Power Sequencer and System Manager PDF | HTML 16 Sep 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

GUI für Evaluierungsmodul (EVM)

UCD-POWER-SEQUENCER-STUDIO — Configure the UCD91XXX device family using the UCD Power Sequencer Studio

Graphical environment for configuring, storing, and monitoring parameters for the UCD91xxx sequencer family
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Sequenzer
UCD91160 — Stromversorgungssequenzer und Systemmanager für PMBus mit 16 Schienen UCD91320 — 32 rail PMBus power sequencer and system manager
Download-Optionen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
LQFP (PM) 64 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos