Detalles del producto

Sample rate (max) (Msps) 20 Resolution (Bits) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 140 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 1 Power consumption (typ) (mW) 150 Architecture Two-Step SNR (dB) 59 ENOB (bit) 9.5 SFDR (dB) 76 Operating temperature range (°C) -40 to 85 Input buffer No
Sample rate (max) (Msps) 20 Resolution (Bits) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 140 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 1 Power consumption (typ) (mW) 150 Architecture Two-Step SNR (dB) 59 ENOB (bit) 9.5 SFDR (dB) 76 Operating temperature range (°C) -40 to 85 Input buffer No
TQFP (PFB) 48 81 mm² 9 x 9
  • Internal Sample-and-Hold
  • Internal Reference Capability
  • Dual Gain Settings
  • Offset Correction
  • Selectable Offset Binary or 2's Complement Output
  • Multiplexed or Parallel Output Bus
  • Single +2.7V to 3.6V Operation
  • Power Down and Standby Modes

Key Specifications

  • Resolution 10 Bits
  • Conversion Rate 20 MSPS
  • ENOB 9.5 Bits (typ)
  • DNL 0.35 LSB (typ)
  • Conversion Latency Parallel Outputs 2.5 Clock Cycles
  • Multiplexed Outputs, I Data Bus 2.5 Clock Cycles
  • Multiplexed Outputs, Q Data Bus 3 Clock Cycles
  • PSRR 90 dB
  • Power Consumption—Normal Operation 150 mW (typ)
  • Power Down Mode <1 mW (typ)
  • Fast Recovery Standby Mode 27 mW (typ)

All trademarks are the property of their respective owners.

  • Internal Sample-and-Hold
  • Internal Reference Capability
  • Dual Gain Settings
  • Offset Correction
  • Selectable Offset Binary or 2's Complement Output
  • Multiplexed or Parallel Output Bus
  • Single +2.7V to 3.6V Operation
  • Power Down and Standby Modes

Key Specifications

  • Resolution 10 Bits
  • Conversion Rate 20 MSPS
  • ENOB 9.5 Bits (typ)
  • DNL 0.35 LSB (typ)
  • Conversion Latency Parallel Outputs 2.5 Clock Cycles
  • Multiplexed Outputs, I Data Bus 2.5 Clock Cycles
  • Multiplexed Outputs, Q Data Bus 3 Clock Cycles
  • PSRR 90 dB
  • Power Consumption—Normal Operation 150 mW (typ)
  • Power Down Mode <1 mW (typ)
  • Fast Recovery Standby Mode 27 mW (typ)

All trademarks are the property of their respective owners.

The ADC10D020 is a dual low power, high performance CMOS analog-to-digital converter that digitizes signals to 10 bits resolution at sampling rates up to 30 MSPS while consuming a typical 150 mW from a single 3.0V supply. No missing codes is ensured over the full operating temperature range. The unique two stage architecture achieves 9.5 Effective Bits over the entire Nyquist band at 20 MHz sample rate. An output formatting choice of offset binary or 2's complement coding and a choice of two gain settings eases the interface to many systems. Also allowing great flexibility of use is a selectable 10-bit multiplexed or 20-bit parallel output mode. An offset correction feature minimizes the offset error.

To ease interfacing to most low voltage systems, the digital output power pins of the ADC10D020 can be tied to a separate supply voltage of 1.5V to 3.6V, making the outputs compatible with other low voltage systems. When not converting, power consumption can be reduced by pulling the PD (Power Down) pin high, placing the converter into a low power state where it typically consumes less than 1 mW and from which recovery is less than 1 ms. Bringing the STBY (Standby) pin high places the converter into a standby mode where power consumption is about 27 mW and from which recovery is 800 ns.

The ADC10D020's speed, resolution and single supply operation makes it well suited for a variety of applications, including high speed portable applications.

Operating over the industrial (−40° ≤ TA ≤ +85°C) temperature range, the ADC10D020 is available in a 48-pin TQFP package. An evaluation board is available to ease the design effort.

The ADC10D020 is a dual low power, high performance CMOS analog-to-digital converter that digitizes signals to 10 bits resolution at sampling rates up to 30 MSPS while consuming a typical 150 mW from a single 3.0V supply. No missing codes is ensured over the full operating temperature range. The unique two stage architecture achieves 9.5 Effective Bits over the entire Nyquist band at 20 MHz sample rate. An output formatting choice of offset binary or 2's complement coding and a choice of two gain settings eases the interface to many systems. Also allowing great flexibility of use is a selectable 10-bit multiplexed or 20-bit parallel output mode. An offset correction feature minimizes the offset error.

To ease interfacing to most low voltage systems, the digital output power pins of the ADC10D020 can be tied to a separate supply voltage of 1.5V to 3.6V, making the outputs compatible with other low voltage systems. When not converting, power consumption can be reduced by pulling the PD (Power Down) pin high, placing the converter into a low power state where it typically consumes less than 1 mW and from which recovery is less than 1 ms. Bringing the STBY (Standby) pin high places the converter into a standby mode where power consumption is about 27 mW and from which recovery is 800 ns.

The ADC10D020's speed, resolution and single supply operation makes it well suited for a variety of applications, including high speed portable applications.

Operating over the industrial (−40° ≤ TA ≤ +85°C) temperature range, the ADC10D020 is available in a 48-pin TQFP package. An evaluation board is available to ease the design effort.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
NUEVO ADC3910D025 ACTIVO ADC de 10 bits, 2 canales y 25 MSPS, con latencia de un ciclo de reloj, decimación de hasta 16x y co Lower power and smaller package size

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet ADC10D020 Dual 10-Bit, 20 MSPS, 150 mW A/D Converter datasheet (Rev. D) 04 mar 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

ADC10D020 IBIS Model

SNAM009.ZIP (4 KB) - IBIS Model
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TQFP (PFB) 48 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos