Transceptor de muestreo de RF de cuatro canales, 12 bits y 64 GSPS

Detalles del producto

Applications Avionics & Defense, Communications and Telecom, General purpose, Industrial, Test and Measurement Number of TXs and RXs 4 TX, 4 RX RF frequency (max) (MHz) 40000 RF frequency (min) (MHz) 0 Number of DUCs per TX 4 Number of DDCs per RX 4 Operating temperature range (°C) -40 to 85 Rating Catalog
Applications Avionics & Defense, Communications and Telecom, General purpose, Industrial, Test and Measurement Number of TXs and RXs 4 TX, 4 RX RF frequency (max) (MHz) 40000 RF frequency (min) (MHz) 0 Number of DUCs per TX 4 Number of DDCs per RX 4 Operating temperature range (°C) -40 to 85 Rating Catalog
FCBGA (AQK) 826 576 mm² (24 mm × 24 mm)
  • Request full data sheet
  • Quad RF sampling 32 to 64GSPS DACs and ADCs
  • RF frequency range: DC to >40GHz
  • Sub-ADC core sample rate: 8GSPS
  • Maximum signal bandwidth:
    • 4T4R: 3.2GHz (4GSPS complex)
    • 2T2R: 6.4GHz (8GSPS complex)
  • Input clock: 4 to 8GHz
  • ADC performance
    • Noise floor: -154dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DAC performance
    • NSD (-12dBFS, 16.1GHz): -163dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DSP blocks
    • Multiband DUC/DDC (phase coherent hopping)
    • PFIR equalizer
    • FFT spectrum analyzer
    • Fractional resampler
  • SerDes data interface:
    • JESD204B and JESD204C compatible
    • 16 SerDes transceivers up to 32.5Gbps
    • Subclass 1 multi-device synchronization
  • Supply voltages: 0.9V, 1.2V, and 1.8V
  • Package: 24mm × 24mm FCBGA, 0.8mm pitch
  • Request full data sheet
  • Quad RF sampling 32 to 64GSPS DACs and ADCs
  • RF frequency range: DC to >40GHz
  • Sub-ADC core sample rate: 8GSPS
  • Maximum signal bandwidth:
    • 4T4R: 3.2GHz (4GSPS complex)
    • 2T2R: 6.4GHz (8GSPS complex)
  • Input clock: 4 to 8GHz
  • ADC performance
    • Noise floor: -154dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DAC performance
    • NSD (-12dBFS, 16.1GHz): -163dBFS/Hz
    • IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
  • DSP blocks
    • Multiband DUC/DDC (phase coherent hopping)
    • PFIR equalizer
    • FFT spectrum analyzer
    • Fractional resampler
  • SerDes data interface:
    • JESD204B and JESD204C compatible
    • 16 SerDes transceivers up to 32.5Gbps
    • Subclass 1 multi-device synchronization
  • Supply voltages: 0.9V, 1.2V, and 1.8V
  • Package: 24mm × 24mm FCBGA, 0.8mm pitch

The AFE34RF90 is a high performance, wide bandwidth multi-channel transceiver, integrating four 64GSPS RF sampling digital-to-analog converters (DAC) and four 64GSPS RF sampling analog-to-digital converters (ADC). With receiver RF bandwidth of 40GHz and transmitter RF bandwidth of 30GHz, this device enables direct RF sampling in the frequency bands up through Ka-band without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 3.2GHz of signal bandwidth for four TX or 6.4GHz for two TX. An advanced digital signal processing block includes a fractional resampler and a PFIR equalizer followed by multiple digital up converters. The output of the DSP block drive a 64GSPS DAC with a mixed mode output option to enhance 2nd Nyquist operation.

Each receiver chain includes a 64GSPS ADC, followed by multiple digital down converters (DDC), PFIR equalizers and a fractional resampler. Each receiver channel has a signal detection and FFT block for spectral analysis that can automatically control the DDC frequency to quickly tune to spectra with interesting signals. The output of the signal processing block can deliver up to 3.2GHz of signal bandwidth for four RX or 6.4GHz for two RX.

The device includes several loopback paths with variable delay and gain, from a super low latency path directly from the ADC to DAC and longer latency paths including frequency translation.

The AFE34RF90 is a high performance, wide bandwidth multi-channel transceiver, integrating four 64GSPS RF sampling digital-to-analog converters (DAC) and four 64GSPS RF sampling analog-to-digital converters (ADC). With receiver RF bandwidth of 40GHz and transmitter RF bandwidth of 30GHz, this device enables direct RF sampling in the frequency bands up through Ka-band without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.

The TX signal paths support interpolation and digital up conversion options that deliver up to 3.2GHz of signal bandwidth for four TX or 6.4GHz for two TX. An advanced digital signal processing block includes a fractional resampler and a PFIR equalizer followed by multiple digital up converters. The output of the DSP block drive a 64GSPS DAC with a mixed mode output option to enhance 2nd Nyquist operation.

Each receiver chain includes a 64GSPS ADC, followed by multiple digital down converters (DDC), PFIR equalizers and a fractional resampler. Each receiver channel has a signal detection and FFT block for spectral analysis that can automatically control the DDC frequency to quickly tune to spectra with interesting signals. The output of the signal processing block can deliver up to 3.2GHz of signal bandwidth for four RX or 6.4GHz for two RX.

The device includes several loopback paths with variable delay and gain, from a super low latency path directly from the ADC to DAC and longer latency paths including frequency translation.

Descargar Ver vídeo con transcripción Video

Ya están disponibles la hoja de datos completa y los recursos de diseño para la familia AFE34RF90. Solicitar ahora

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos AFE34RF90 Quad Channel 12-Bit 64GSPS RF Sampling AFE datasheet PDF | HTML 4/06/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
FCBGA (AQK) 826 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos