Inicio Audio, háptica y piezoeléctrica Convertidores de audio CODEC de audio
Inicio
Audio, háptica y piezoeléctrica
Convertidores de audio
CODEC de audio

AIC111

ACTIVO

Códec de canal único de micropotencia de 1,3 V

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TAC5111 ACTIVO Códec de audio mono de baja potencia con ADC de rango dinámico de 105 dB y DAC de rango dinámico de Improved SNR

AIC111

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of ADC channels 1 Number of DAC channels 1 Digital audio interface DSP Control interface SPI Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 40 Rating Catalog ADC SNR (typ) (dB) 87 Operating temperature range (°C) 0 to 70
Number of ADC channels 1 Number of DAC channels 1 Digital audio interface DSP Control interface SPI Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 40 Rating Catalog ADC SNR (typ) (dB) 87 Operating temperature range (°C) 0 to 70
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • Single Channel Codec
  • Noise Shaped Delta Sigma ADC and DAC Technology
  • Low Supply Voltage and Current:
    • 1.3-V Typical Power Supply
    • 350-µA Typical Supply Current Drain
  • Power Supply Up Monitor and Low Battery Monitor That Also Automatically Shuts Off H-Bridge Output When Battery Decays Below 1.05 V in a Nontransient Manner
  • Typical 2.4-µVrms Input Referred Noise With 0.01% Total Harmonic Distortion for Front End and 108-dB Dynamic Range
  • ADC Has 87-dB Dynamic Range With 73-dB Total Harmonic Distortion 100 Hz–10 kHz, 40-kHz Sampling Rate
  • Typical 55-dB PSRR 100 Hz to 10 kHz for Analog Front End
  • Low Noise Programmable Gain Amplifier/Compressor Front End With Programmable Fast and Slow Attack and Decay Rates With Dual or Single Attack and Decay Rate Option
  • Typical Output Noise of 12 µVrms With 0.05% Total Harmonic Distortion for Delta Sigma DAC and H-Bridge Output Driver
  • Low Jitter Oscillator That Generates all Internal Clocks and Generates 5-MHz Output DSP/µC Clock
  • Regulated Bandgap Voltage Reference
  • Programmable Functionality via Digital Serial Interface
    • McBSP Interface, DSP Protocol
    • TI TMS320VC54x™, TMS320VC55x™ DSPs
    • SPI Interface, Microcontroller Protocol
    • TI MSP430xx
  • External Chip Power Down and Reset
  • Available in:
    • 32-Pin QFN 5×5-mm Plastic Package
    • 32-Pad Bumped Die in Waffle Pack (wafer scale packaging)
  • APPLICATIONS
    • Hearing Instruments
    • Personal Medical Devices
    • Hearing Protection
    • Aural Processing
    • Low-Power Headsets
  • Single Channel Codec
  • Noise Shaped Delta Sigma ADC and DAC Technology
  • Low Supply Voltage and Current:
    • 1.3-V Typical Power Supply
    • 350-µA Typical Supply Current Drain
  • Power Supply Up Monitor and Low Battery Monitor That Also Automatically Shuts Off H-Bridge Output When Battery Decays Below 1.05 V in a Nontransient Manner
  • Typical 2.4-µVrms Input Referred Noise With 0.01% Total Harmonic Distortion for Front End and 108-dB Dynamic Range
  • ADC Has 87-dB Dynamic Range With 73-dB Total Harmonic Distortion 100 Hz–10 kHz, 40-kHz Sampling Rate
  • Typical 55-dB PSRR 100 Hz to 10 kHz for Analog Front End
  • Low Noise Programmable Gain Amplifier/Compressor Front End With Programmable Fast and Slow Attack and Decay Rates With Dual or Single Attack and Decay Rate Option
  • Typical Output Noise of 12 µVrms With 0.05% Total Harmonic Distortion for Delta Sigma DAC and H-Bridge Output Driver
  • Low Jitter Oscillator That Generates all Internal Clocks and Generates 5-MHz Output DSP/µC Clock
  • Regulated Bandgap Voltage Reference
  • Programmable Functionality via Digital Serial Interface
    • McBSP Interface, DSP Protocol
    • TI TMS320VC54x™, TMS320VC55x™ DSPs
    • SPI Interface, Microcontroller Protocol
    • TI MSP430xx
  • External Chip Power Down and Reset
  • Available in:
    • 32-Pin QFN 5×5-mm Plastic Package
    • 32-Pad Bumped Die in Waffle Pack (wafer scale packaging)
  • APPLICATIONS
    • Hearing Instruments
    • Personal Medical Devices
    • Hearing Protection
    • Aural Processing
    • Low-Power Headsets

The AIC111 IC design specification serves to provide product development teams with a guideline for how the AIC111 IC is specified and programmable options that are available. The document outlines a top-level block description of the IC along with system specifications and functions. Individual block descriptions and target specifications are also outlined.

The Texas Instruments AIC111 is a TI µPower DSP compatible, or microcontroller compatible audio codec product, or analog interface circuit. The AIC111 is part of a comprehensive family of DSP/µC based high-performance analog interface solutions. The AIC111 is targeted primarily at personal medical devices, such as hearing instruments, aural preprocessing applications, and low-power headset applications. The AIC111 is used in any design requiring a programmable time constant PGA/compressor interface, high dynamic range analog-to-digital converter, an external DSP/µC handling signal processing, or a low distortion digital-to-analog converter with a balanced H-Bridge speaker driver. It supports a CMOS digital interface tailored for TI DSPs with the McBSP protocol such as TMS320VC54x™ DSP family and SPI-based controllers such as TI MSP430x family of microcontrollers. The AIC111 also has an external microphone or sensor supply and bias and power supply up low-battery monitor indicator.

The AIC111 comes in a 32-pin QFN 5×5-mm package. A 32-pad solder ball bumped flip chip die that comes in waffle packs or tape and reel is in preview and will be available 3rd quarter 2003.

The AIC111 IC design specification serves to provide product development teams with a guideline for how the AIC111 IC is specified and programmable options that are available. The document outlines a top-level block description of the IC along with system specifications and functions. Individual block descriptions and target specifications are also outlined.

The Texas Instruments AIC111 is a TI µPower DSP compatible, or microcontroller compatible audio codec product, or analog interface circuit. The AIC111 is part of a comprehensive family of DSP/µC based high-performance analog interface solutions. The AIC111 is targeted primarily at personal medical devices, such as hearing instruments, aural preprocessing applications, and low-power headset applications. The AIC111 is used in any design requiring a programmable time constant PGA/compressor interface, high dynamic range analog-to-digital converter, an external DSP/µC handling signal processing, or a low distortion digital-to-analog converter with a balanced H-Bridge speaker driver. It supports a CMOS digital interface tailored for TI DSPs with the McBSP protocol such as TMS320VC54x™ DSP family and SPI-based controllers such as TI MSP430x family of microcontrollers. The AIC111 also has an external microphone or sensor supply and bias and power supply up low-battery monitor indicator.

The AIC111 comes in a 32-pin QFN 5×5-mm package. A 32-pad solder ball bumped flip chip die that comes in waffle packs or tape and reel is in preview and will be available 3rd quarter 2003.
filter Buscar otro/a CODEC de audio
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos IC Design Specification 1.3-V microPower(TM) DSP/uC Voice Band Audio CODEC datasheet (Rev. A) 24/01/2006
Nota sobre la aplicación Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 31/12/2019
Nota sobre la aplicación Audio Serial Interface Configurations for Audio Codecs (Rev. A) 27/06/2019
Nota sobre la aplicación Using the MSP430 Launchpad as a Standalone I2C Host for Audio Products (Rev. A) 28/10/2013
Nota sobre la aplicación Solving Enumeration Errors in USB Audio DAC and CODEC Designs 30/10/2009
Nota sobre la aplicación Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 8/07/2009
Nota sobre la aplicación How to Set the TSC/AIC EVM to Record & Playback Audio or Other Sound Through PC 14/12/2004
Nota sobre la aplicación Efficient Resampling Filters for the AIC111 25/02/2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHB) 32 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos