Inicio Circuitos integrados de gestión de baterías Protectores de baterías
Inicio
Circuitos integrados de gestión de baterías
Protectores de baterías

BQ2204A

COMPRA POR ÚLTIMA VEZ

CI de controlador no volátil SRAM para 4 bancos SRAM

Haga su pedido ahora
Hoja de datos

BQ2204A

COMPRA POR ÚLTIMA VEZ
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Features 4-Bank SRAM, CMOS, Non-volatile controller, Write-protection Operating current (typ) (µA) 3000 Vin (max) (V) 5.5 Operating temperature range (°C) -40 to 85
Rating Catalog Features 4-Bank SRAM, CMOS, Non-volatile controller, Write-protection Operating current (typ) (µA) 3000 Vin (max) (V) 5.5 Operating temperature range (°C) -40 to 85
PDIP (N) 16 181.42 mm² 19.3 x 9.4 SOIC (D) 16 59.4 mm² 9.9 x 6
  • Power monitoring and switching for 3-volt battery-backup applications
  • Write-protect control
  • 2-input decoder for control of up to 4 banks of SRAM
  • 3-volt primary cell inputs
  • Less than 10ns chip-enable propagation delay
  • 5% or 10% supply operation
  • Power monitoring and switching for 3-volt battery-backup applications
  • Write-protect control
  • 2-input decoder for control of up to 4 banks of SRAM
  • 3-volt primary cell inputs
  • Less than 10ns chip-enable propagation delay
  • 5% or 10% supply operation

The CMOS bq2204A SRAM Non-volatile Controller Unit provides all necessary functions for converting up to four banks of standard CMOS SRAM into nonvolatile read/write memory.

A precision comparator monitors the 5V VCC input for an out-of-tolerance condi-tion. When out-of-tolerance is detected, the four conditioned chip-enable outputs are forced inactive to write-protect up to four banks of SRAM.

During a power failure, the external SRAMs are switched from the VCC supply to one of two 3V backup sup-plies. On a subsequent power-up, the SRAMs are write-protected until a power-valid condition exists.

During power-valid operation, a two-input decoder transparently selects one of up to four banks of SRAM.

The CMOS bq2204A SRAM Non-volatile Controller Unit provides all necessary functions for converting up to four banks of standard CMOS SRAM into nonvolatile read/write memory.

A precision comparator monitors the 5V VCC input for an out-of-tolerance condi-tion. When out-of-tolerance is detected, the four conditioned chip-enable outputs are forced inactive to write-protect up to four banks of SRAM.

During a power failure, the external SRAMs are switched from the VCC supply to one of two 3V backup sup-plies. On a subsequent power-up, the SRAMs are write-protected until a power-valid condition exists.

During power-valid operation, a two-input decoder transparently selects one of up to four banks of SRAM.
filter Buscar otro/a Protectores de baterías
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet X4 SRAM Nonvolatile Controller Unit datasheet 05 sep 1999

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje