BQ27Z746

ACTIVO

Indicador de combustible del lado del paquete de una celda con tecnología Impedance Track™ y protect

Detalles del producto

Cell chemistry Li-Ion/Li-Polymer, LiFePO4 Number of series cells Single Cell Communication interface HDQ, I2C Battery capacity (min) (mAh) 100 Battery capacity (max) (mAh) 32000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm, Integrated Protector, SHA-256 Authentication Operating temperature range (°C) -40 to 85 Rating Catalog
Cell chemistry Li-Ion/Li-Polymer, LiFePO4 Number of series cells Single Cell Communication interface HDQ, I2C Battery capacity (min) (mAh) 100 Battery capacity (max) (mAh) 32000 Implementation Pack External capacity indication None Features Impedance Track™ algorithm, Integrated Protector, SHA-256 Authentication Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YAH) 15 5.4488 mm² (2.78 mm × 1.96 mm)
  • Integrated battery gas gauge and protector
  • Flash-programmable custom BQBMP RISC CPU
    • SHA-256 authentication
    • 400kHz I2C bus communications interface
  • Low-voltage (2.0V) operation
  • Two independent precision 16-bit ADCs
    • Coulomb counting ADC with current sense resistor down to 1mΩ
    • Voltage ADC for cell voltage and external and internal temperature sensors
  • Battery fuel gauging based on patented Impedance Track™ technology
    • Models battery discharge curve for accurate time-to-empty predictions
    • Automatically adjusts for aging-, temperature-, and rate-induced effects on the battery
  • Battery Kelvin sense differential analog output pins with built-in protection
  • High-side or low-side current sensing
  • Programmable hardware-based protection
    • High-side FET gate drivers
    • Overvoltage and undervoltage (OVP and UVP)
    • Overcurrent in discharge and overcurrent in charge (OCD and OCC)
    • Short circuit in discharge (SCD)
    • Firmware-based overtemperature (OT)
  • Reduced typical power modes
    • SLEEP mode: 20µA
    • SHIP mode: 10µA
    • SHELF mode 5 µA
    • SHUTDOWN mode: 0.2µA
  • Ultra-compact, 15-ball NanoFree™ DSBGA
  • Integrated battery gas gauge and protector
  • Flash-programmable custom BQBMP RISC CPU
    • SHA-256 authentication
    • 400kHz I2C bus communications interface
  • Low-voltage (2.0V) operation
  • Two independent precision 16-bit ADCs
    • Coulomb counting ADC with current sense resistor down to 1mΩ
    • Voltage ADC for cell voltage and external and internal temperature sensors
  • Battery fuel gauging based on patented Impedance Track™ technology
    • Models battery discharge curve for accurate time-to-empty predictions
    • Automatically adjusts for aging-, temperature-, and rate-induced effects on the battery
  • Battery Kelvin sense differential analog output pins with built-in protection
  • High-side or low-side current sensing
  • Programmable hardware-based protection
    • High-side FET gate drivers
    • Overvoltage and undervoltage (OVP and UVP)
    • Overcurrent in discharge and overcurrent in charge (OCD and OCC)
    • Short circuit in discharge (SCD)
    • Firmware-based overtemperature (OT)
  • Reduced typical power modes
    • SLEEP mode: 20µA
    • SHIP mode: 10µA
    • SHELF mode 5 µA
    • SHUTDOWN mode: 0.2µA
  • Ultra-compact, 15-ball NanoFree™ DSBGA

The Texas Instruments BQ27Z746 Impedance Track™ gas gauge solution is a highly integrated, accurate 1-series cell gas gauge and protection solution.

The BQ27Z746 device provides a fully integrated pack-based solution with a flash programmable custom reduced instruction-set CPU (RISC), safety protection, differential battery sensing analog output, and authentication for 1-series cell Li-ion and Li-polymer battery packs.

The BQ27Z746 gas gauge communicates through an I2C compatible interface and combines an ultra-low power TI BQBMP processor, high accuracy analog measurement capabilities, integrated flash memory, N-CH high-side FET drive, and a SHA-2 Authentication transform responder into a complete, high-performance battery management solution.

The Texas Instruments BQ27Z746 Impedance Track™ gas gauge solution is a highly integrated, accurate 1-series cell gas gauge and protection solution.

The BQ27Z746 device provides a fully integrated pack-based solution with a flash programmable custom reduced instruction-set CPU (RISC), safety protection, differential battery sensing analog output, and authentication for 1-series cell Li-ion and Li-polymer battery packs.

The BQ27Z746 gas gauge communicates through an I2C compatible interface and combines an ultra-low power TI BQBMP processor, high accuracy analog measurement capabilities, integrated flash memory, N-CH high-side FET drive, and a SHA-2 Authentication transform responder into a complete, high-performance battery management solution.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
BQ27Z758 ACTIVO Indicador de carga de batería Impedance Track™ serie 1 y protección con carga de 0 V real BQ27Z758 has true 0-V charge function

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos BQ27Z746 Impedance Track Technology Battery Gas Gauge and Protection Solution for 1-Series Cell Li-Ion Battery Packs datasheet (Rev. D) PDF | HTML 12/02/2026
* Guía del usuario BQ27Z746-R1 and BQ27Z758 Technical Reference Manual (Rev. E) PDF | HTML 18/06/2026
* Guía del usuario BQ27Z746-R1 Technical Reference Manual PDF | HTML 17/10/2023
* Guía del usuario BQ27Z746 Technical Reference Manual PDF | HTML 27/10/2021
Nota sobre la aplicación How to Create and Program Authentication Keys into TI Battery Fuel Gauges PDF | HTML 5/03/2025
Nota sobre la aplicación BQ27Z746 Hardware Protection Threshold Calibration PDF | HTML 2/12/2024
Nota sobre la aplicación Battery Gauging Algorithm Comparison PDF | HTML 4/12/2023
Nota sobre la aplicación Design Flexibility for Reverse Charge Protection Using BQ27Z746 PDF | HTML 2/08/2023
Certificado BQ27Z746EVM-047 EU RoHS Declaration of Conformity (DoC) 1/11/2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ27Z746EVM-047 — Módulo de evaluación de BQ27Z746 para indicador de gas de batería con tecnología Impedance Track™ y

El módulo de evaluación (EVM) BQ27Z746EVM‑047 es un sistema de evaluación completo para el gestor de baterías BQ27Z746. El EVM incluye BQ27Z746 con módulo de circuito de protección integrado y un enlace al software de PC basado en Windows®. El circuito integrado (IC) BQ27Z746 y todos los (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Software de aplicación y estructura

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Battery Management Studio (bqStudio) ofrece un conjunto completo de herramientas robustas para ayudar con el proceso de evaluación, diseño, configuración, prueba o utilización de productos de gestión de baterías de TI. Esto incluye funciones que (...)

Productos y hardware compatibles
Firmware

BQ27Z746-DEVICE-FW — Firmware for BQ27Z746 family of gauges

The BQ27Z746-DEVICE-FW is a firmware (FW)-only release that can be flashed onto any existing hardware such as BQ27Z746 product. The firmware incorporates the patented Impedance Track™ technology to create a pack-based solution that provides a rich array of features for gas gauging, protection, (...)

Productos y hardware compatibles
Herramienta de programación de software

BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products

El kit de desarrollo de software (SDK) BQ-BATTERY-PROGRAMMER-SW es una colección de herramientas de línea de comandos de software robustas que ayudan con el proceso de programación, prueba o ensamblaje de paquetes que utilizan productos de administración de baterías de TI. Los ejecutables de este (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YAH) 15 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos